Strata Caps (2)

Donaldson Strata Cap pre-cleaners separate dust and debris from incoming air in a low-profile cap, built for air intakes where there's little height to spare above the stack. They're used on off-road, ag, mining and construction machines that need pre-cleaning but can't fit a taller unit under a bonnet line, cab overhang or shed door. Like other centrifugal pre-cleaners, they spin the air so heavier particles are thrown out before they reach the filter. Outlet size and the engine's airflow are the two things to match. Without a pre-cleaner, the air filter takes the full dust load, restriction climbs faster and elements get changed more often. If height isn't a problem, compare a TopSpin.

Strata Caps

2 products

  • Donaldson H002704 Strata Cap Pre-cleaner – 8.00 in / 204 mm Outlet, Large
    Vendor:
    Donaldson

    H002704 Strata Cap Pre-cleaner, 8.00 in / 204 mm outlet, Large

    Regular price $663.70 AUD
    Sale price $663.70 AUD Regular price
  • Donaldson H002700 Strata Cap Pre-cleaner – 5.08 in / 129 mm Outlet, Small
    Vendor:
    Donaldson

    H002700 Strata Cap Pre-cleaner, 5.08 in / 129 mm outlet, Small

    Regular price $437.90 AUD
    Sale price $437.90 AUD Regular price

What is a Strata Cap?

A low-profile pre-cleaner that mounts on top of the intake pipe. It separates coarse dust centrifugally like a taller unit, but its flat shape keeps the overall stack height down. Fit it with the outlet fully engaged on the pipe and secured, because a pre-cleaner that works loose on a rough site leaves the intake open.

When should I choose a Strata Cap over a TopSpin?

When height clearance is the limit. If a taller pre-cleaner fits, a TopSpin or TopSpin HD gives more outlet size options. If it doesn't, a Strata Cap still gets pre-cleaning onto the machine.

How do I size one?

Match the outlet to the intake pipe outside diameter, then confirm the engine's airflow falls within Donaldson's rating for that size. Check the OEM manual or the spec sheet if the airflow figure isn't to hand.

Does a Strata Cap need maintenance?

Not much, but it needs a look. Inspect for cracks, blocked passages and loose mounting at each filter service, and clear any build-up of chaff or mud.

  • Intake pipe outside diameter
  • Engine airflow against the rating
  • Height available above the stack
  • Dust type and load

Compare TopSpin pre-cleaners and the all-metal TopSpin HD, see every option in pre-cleaners, or ask us to size one.

Which Strata Cap do I need?

There are two. The H002700 Small has a 129 mm outlet rated to 17 m³/min; the H002704 Large has a 204 mm outlet rated to 32.3 m³/min. Match the outlet to your intake pipe and keep your engine's airflow under the rating. For other pipe sizes, see TopSpin or TopSpin HD.

Why choose a Strata Cap over a TopSpin?

Higher separation and a lower stack. Donaldson rates the Strata Cap at 96% (ISO 5011, SAE J726) against 85% for the TopSpin. On a 128–129 mm intake, the Strata Cap H002700 stands 203 mm tall against 287 mm for the TopSpin H002433, which matters where height clearance is tight.

The trade is width, flow and restriction: 356 mm across against 288 mm, rated to 17 m³/min against 22.6, and 152 mm H₂O of restriction at maximum flow against 76 mm. Check all three against your machine before you choose.