Radial Seal Air Filters (454)

Radial seal air filters seal on the end cap rather than the end face, with a soft moulded seal that grips the housing's outlet tube as the element slides home. Because the seal is made by compression around the tube, it doesn't depend on the cover clamping it tight, and it's the standard design on a large share of modern trucks, tractors, loaders and gensets. Primary and safety elements are separate parts and must not be swapped. Match the part number first, then confirm diameter, length and seal position against the element that came out. A scored or dirty outlet tube, or an element that isn't pushed fully home, leaves a path for dust straight into the engine. The fitment tips below help when switching brands.

Radial Seal Air Filters

454 products

  • Baldwin RS3544 Primary Air Filter – Radial Seal
    Vendor:
    Baldwin

    RS3544 Air Filter- Radial Seal, Primary

    Regular price $62.10 AUD
    Sale price $62.10 AUD Regular price
  • Fleetguard AF25558 Secondary Air Filter – Radial Seal, Magnum RS
    Vendor:
    Fleetguard

    AF25558 Air Filter- Radial Seal, Secondary, Magnum RS

    1 in stock
    Regular price $48.70 AUD
    Sale price $48.70 AUD Regular price
  • Fleetguard AF25551 Primary Air Filter – Radial Seal, Magnum RS
    Vendor:
    Fleetguard

    AF25551 Air Filter- Radial Seal, Primary, Magnum RS

    2 in stock
    Regular price $49.40 AUD
    Sale price $49.40 AUD Regular price
  • Baldwin RS3988 Primary Air Filter – Radial Seal
    Vendor:
    Baldwin

    RS3988 Air Filter- Radial Seal, Primary

    Regular price $47.30 AUD
    Sale price $47.30 AUD Regular price
  • Fleetguard AF25557 Primary Air Filter – Radial Seal, Magnum RS
    Vendor:
    Fleetguard

    AF25557 Air Filter- Radial Seal, Primary, Magnum RS

    3 in stock
    Regular price $63.60 AUD
    Sale price $63.60 AUD Regular price
  • Fleetguard AF25552 Secondary Air Filter – Radial Seal, Magnum RS
    Vendor:
    Fleetguard

    AF25552 Air Filter- Radial Seal, Secondary, Magnum RS

    2 in stock
    Regular price $39.00 AUD
    Sale price $39.00 AUD Regular price
  • Fleetguard AF25526 Primary Air Filter – Radial Seal, Magnum RS
    Vendor:
    Fleetguard

    AF25526 Air Filter- Radial Seal, Primary, Magnum RS

    1 in stock
    Regular price $73.00 AUD
    Sale price $73.00 AUD Regular price
  • Fleetguard AF26659 Primary Air Filter – Radial Seal, Magnum RS
    Vendor:
    Fleetguard

    AF26659 Air Filter- Radial Seal, Primary, Magnum RS

    Regular price $60.10 AUD
    Sale price $60.10 AUD Regular price
  • Baldwin RS5449 Air Filter – Radial Seal
    Vendor:
    Baldwin

    RS5449 Air Filter- Radial Seal

    Regular price $51.20 AUD
    Sale price $51.20 AUD Regular price
  • Baldwin RS5325 Air Filter – Radial Seal
    Vendor:
    Baldwin

    RS5325 Air Filter- Radial Seal

    Regular price $76.70 AUD
    Sale price $76.70 AUD Regular price
  • Baldwin RS5335 RS5304 Secondary Air Filter – Radial Seal
    Vendor:
    Baldwin

    RS5335 Air Filter- Radial Seal, Secondary

    Regular price $52.50 AUD
    Sale price $52.50 AUD Regular price
  • Baldwin RS3923 Secondary Air Filter – Radial Seal
    Vendor:
    Baldwin

    RS3923 Air Filter- Radial Seal, Secondary

    1 in stock
    Regular price $117.90 AUD
    Sale price $117.90 AUD Regular price
  • Baldwin RS3922 Primary Air Filter – Radial Seal
    Vendor:
    Baldwin

    RS3922 Air Filter- Radial Seal, Primary

    Regular price $123.60 AUD
    Sale price $123.60 AUD Regular price
  • Baldwin RS3715 Primary Air Filter – Radial Seal
    Vendor:
    Baldwin

    RS3715 Air Filter- Radial Seal, Primary

    Regular price $38.30 AUD
    Sale price $38.30 AUD Regular price
  • Baldwin RS3705 Secondary Air Filter – Radial Seal
    Vendor:
    Baldwin

    RS3705 Air Filter- Radial Seal, Secondary

    1 in stock
    Regular price $42.00 AUD
    Sale price $42.00 AUD Regular price

How does a radial seal work?

The seal is compressed sideways between the element's end cap and the outlet tube. As long as the element is fully seated, the seal holds regardless of cover pressure. Most seal on the inside of the end cap, while some seal on the outside against a housing bore.

Why won't my new element seat?

Usually because the outlet tube is dirty, the element is the wrong one, or debris is sitting on the sealing surface. Wipe the tube clean, check the part number, and push the element on squarely until it stops. Never use the cover to force it home.

Can I swap brands?

Yes, if the cross-reference is correct. Check that the replacement lists your OEM or original number, and that primary goes with primary and safety with safety, since labelling varies between makers (outer and inner, primary and secondary).

  • Part number and cross-reference
  • Primary or safety position
  • Seal on the inside or outside of the end cap
  • Diameter and length
  • Standard or extended-life media

Housing uses an end-face seal? Go to axial seal air filters. For longer intervals in heavy dust see extreme performance air filters, or buy matched pairs in air filter kits. Ask us to check a cross-reference.

What should I measure on a radial seal element?

Outside diameter, length, and the inside diameter of the open end that seals on the tube. Fleetguard lists that last figure as the largest end inner diameter in the Technical Specification tab, for example 159.3 mm on the AF26124. Baldwin lists it as the inner diameter.

Length is the one that catches people out. The RS3510 and RS3514 share a 315.1 mm outside diameter and a 208 mm bore, and differ only in length: 393.7 mm against 483.4 mm. Compare all three numbers with the element you're removing before you order.

Does the cover hold a radial seal element in place?

No. The seal is made when the element is pushed fully home on the outlet tube, independent of the cover. That's why radial seal suits machines that vibrate constantly, such as compaction and drilling plant: a tired cover latch doesn't open a leak path.

The flip side is that you seat the element by hand before the cover goes on. Push it fully onto the tube, check it sits square, then fit the cover. Don't rely on the cover to push a part-seated element home.

My PowerCore element says RadialSeal. Why isn't it in this section?

Because PowerCore is a different element. It uses Donaldson's RadialSeal to seal, but the media is a straight-through block (round, obround or panel) rather than a pleated cylinder, and it only fits a PowerCore housing. You'll find those in Direct Flow and PowerCore air filters. This section holds round pleated radial seal elements.