Automatic & CVT Transmission Fluid (8)

Automatic transmission fluid and CVT fluid for cars, 4WDs, SUVs and light commercials. Modern automatics are built around a specific fluid, with friction characteristics matched to the clutch packs and torque converter lock-up, so carmakers publish their own specs, such as Dexron, Mercon or an OEM-specific approval code. CVTs need their own fluid again, designed for the steel belt or chain running on the pulleys.

Read the spec from the handbook or dipstick rather than guessing from the vehicle's age or country of origin, and treat CVTs as a separate job. The wrong friction profile shows up as shudder, flare, slip or harsh shifts, and in a CVT it can end in a belt and pulley replacement. The guide below explains multi-vehicle fluids and fluid changes.

Automatic & CVT Transmission Fluid

8 products

  • Valvoline 1272.20 Dexron VI – Synthetic ATF 20L
    Vendor:
    Valvoline

    1272.20 Dexron VI, Synthetic Automatic Transmisison Fluid 20L

    1 in stock
    Regular price $279.00 AUD
    Sale price $279.00 AUD Regular price
  • Valvoline 1330.05 SynPower CVT Synthetic Transmission Fluid 5L
    Vendor:
    Valvoline

    1330.05 SynPower CVT Synthetic Transmission Fluid 5L

    3 in stock
    Regular price $87.95 AUD
    Sale price $87.95 AUD Regular price
  • Valvoline 1448.20 Syn Gard ATF 668 Transmission Fluid 20L
    Vendor:
    Valvoline

    1448.20 Syn Gard 668 Synthetic Automatic Transmission Fluid 20L

    1 in stock
    Regular price $389.00 AUD
    Sale price $389.00 AUD Regular price
  • Valvoline 1215.04 Dexron III – Mineral ATF 4L
    Vendor:
    Valvoline

    1215.04 Dexron III, Mineral Automatic Transmission Fluid 4L

    4 in stock
    Regular price $39.95 AUD
    Sale price $39.95 AUD Regular price
  • Valvoline 1129.20 MaxLife Multi-Vehicle – Synthetic ATF 20L
    Vendor:
    Valvoline

    1129.20 MaxLife Multi-Vehicle, Synthetic Automatic Transmission Fluid 20L

    1 in stock
    Regular price $279.00 AUD
    Sale price $279.00 AUD Regular price
  • Valvoline 1415.20 Syngard ATF ES Transmission Fluid 20L
    Vendor:
    Valvoline

    1415.20 Syngard ES Synthetic Automatic Transmission Fluid 20L

    1 in stock
    Regular price $299.00 AUD
    Sale price $299.00 AUD Regular price
  • Valvoline 1215.20 Dexron III – Mineral ATF 20L
    Vendor:
    Valvoline

    1215.20 Dexron III, Mineral Automatic Transmission Fluid 20L

    2 in stock
    Regular price $209.00 AUD
    Sale price $209.00 AUD Regular price
  • Valvoline 1129.04 MaxLife Multi-Vehicle – Synthetic ATF 4L
    Vendor:
    Valvoline

    1129.04 MaxLife Multi-Vehicle, Synthetic Automatic Transmission Fluid 4L

    4 in stock
    Regular price $47.95 AUD
    Sale price $47.95 AUD Regular price

What is a multi-vehicle ATF?

It's a fluid formulated to meet a list of OEM specs at once. Workshops use them to cover more vehicles from one drum. They work well when the product lists the spec your transmission needs, but some transmissions call for a dedicated fluid, and a multi-vehicle ATF is never a substitute for CVT or dual-clutch fluid.

How do you change automatic transmission fluid?

Follow the maker's procedure, because a simple drain and refill only replaces part of the fluid. Much of it stays in the torque converter, cooler and lines, so a full change usually takes repeated drain and fills or a fluid exchange machine. Many modern units have no dipstick and are checked hot at a fill plug, so the level procedure matters as much as the fluid.

Choosing an ATF or CVT fluid

  • The named spec or approval code from the handbook or dipstick.
  • Transmission type: conventional automatic, CVT or dual-clutch.
  • Multi-vehicle fluids: confirm your exact spec is listed.
  • Service history: if the box has had a different fluid, a full exchange is better than a top-up.
  • Pack size for top-ups, single services or workshop drums.

Fit a new transmission filter with the fluid change. Heavy-duty and powershift units belong in heavy-duty transmission fluids, and manual boxes in gear oils. Stuck on a spec? Ask us.

Which automatic transmission fluid do I need?

The one that lists the exact specification in your owner's manual or on the transmission's spec plate. The name of the vehicle isn't enough; the spec is what decides it.

Find the spec, then match it in the table on this page. Our range covers:

If your spec isn't listed for any of them, send it to us and we'll source the right fluid rather than guess.

What does MaxLife Multi-Vehicle ATF cover, and what doesn't it?

MaxLife lists a long run of conventional automatic specs, including:

  • GM and Ford: Dexron II and III, Mercon and Mercon V.
  • Allison: C-3 and C-4.
  • Toyota: Type T, T-III and T-IV.
  • Mercedes-Benz: MB 236.1, 236.2, 236.3, 236.6, 236.7, 236.9, 236.10 and 236.11.
  • ZF: TE-ML 14B, 16L and 17C, plus ZF 6 and 8 speed transmissions.
  • Others: Chrysler, Honda, Hyundai, Kia, Mazda, Mitsubishi, Nissan, Subaru and VW specs.

It is not for CVTs, DCTs or any transmission that specifies Type F. Valvoline also marks some listed specs as low-viscosity applications outside MaxLife's viscosity parameters, including Dexron VI, Mercon LV, Mercon SP, Toyota WS, Aisin Warner AW-1 and Honda DW1. Don't use MaxLife where those are specified.

Vehicle makers only recognise their own approved fluid during warranty. MaxLife is the alternative once the vehicle is out of warranty.

My transmission needs Dexron VI, Mercon LV or Toyota WS. What do I use?

For Dexron VI, use our Dexron VI ATF. It is officially licensed by GM, and it can also go wherever Dexron II or III is recommended.

For Mercon LV or Toyota WS, we don't list a dedicated fluid at the moment. MaxLife is not the answer: Valvoline marks both as low-viscosity applications outside MaxLife's viscosity parameters. Send us the spec and we'll source a fluid that meets it.

Can I use ordinary ATF in a CVT or dual-clutch transmission?

No. A CVT needs a CVT fluid with the friction properties its belt or chain and pulleys are designed around, and MaxLife's data sheet rules out CVTs and DCTs.

For belt and chain CVTs in passenger cars and vans, use SynPower CVT where your CVT's spec is on its list, such as Nissan NS-2, Toyota TC, Honda HCF-2, Subaru Lineartronic or GM DEX-CVT. It is not for Toyota and Ford hybrid CVT units, and Valvoline says not to mix it with other transmission oils.

We don't currently list a DCT fluid. Send us the spec from the manual and we'll source one.

Do you have ATF for transmissions that specify Type F?

No. None of the ATFs we list are for Type F applications. Valvoline's data sheets for MaxLife and ATF DX-3 both say not to use them where Type F is specified, and DX-3 also excludes Ford M2C33-F and G.

Type F was formulated with different friction characteristics from Dexron and Mercon fluids, so a substitute changes how the clutches engage. If your manual specifies Type F, send it to us and we'll source the right fluid.

How often should automatic transmission fluid be changed?

At the interval in the vehicle or transmission maker's service schedule for your type of use. We don't quote general kilometre figures, because they vary widely by transmission and by duty.

Some heavy-duty fluids carry an approved extended interval. For example, Syn Gard ATF ES is approved for a 120,000 km drain interval under Voith H55.6336.33, which applies to Voith transmissions, not to every application.

Change the fluid sooner if it has been overheated or contaminated, or if the wrong fluid has gone in.