PPE (0)

Workshop PPE protects hands, eyes and lungs from the oils, solvents, sharp edges and dust that come with servicing vehicles and machinery. The category takes in disposable and reusable gloves, safety glasses and particulate respirators for mechanics, fleet crews, farm workers and plant maintenance teams.

Match each item to the hazard: chemical resistance for oils and solvents, cut and abrasion ratings for sheet metal and handling, impact-rated eyewear, and the right respirator class for dust. A thin glove that tears halfway through a filter change, or a dust mask that doesn't seal on the face, gives a false sense of protection. The guide below explains the Australian standards to look for.

Shield Right Premium Full-Grain Cowhide Leather Riggers Gloves – Grey

No products found.

Use fewer filters or clear filters.


Which gloves are best for oil and solvents?

Nitrile is the usual choice. It resists oils, fuels and many solvents better than latex and avoids latex allergies. Thicker disposable gloves last longer on dirty jobs, and for aggressive solvents check the glove maker's chemical resistance chart. Disposable gloves are single use, so swap them once torn or soaked.

What do glove cut ratings mean?

They show how a glove performs against mechanical hazards. EN 388, adopted in Australia as AS/NZS 2161.3, rates abrasion, cut, tear and puncture resistance. The 2016 edition of EN 388 adds a letter grade from A to F for cut resistance, with F the highest, so choose a higher letter for sheet metal, glass and sharp edges.

Which safety glasses and respirators should I use?

Look for AS/NZS 1337.1 on eyewear and AS/NZS 1716 on respirators. P2 respirators suit fine dust and fumes, such as servicing air cleaners or grinding. Particulate filters don't stop gases or solvent vapours, which need a cartridge respirator with the correct gas filter. Facial hair breaks the seal, so fit-check every time.

  • Hazard: chemical, cut, impact, dust or vapour.
  • Standard marking on the product or packaging.
  • Size, fit and dexterity for fine work.
  • Single use or reusable, and box quantity against crew usage.

Keep gloves with your spill kits and beside the workshop chemicals shelf, especially where staff handle brake cleaner and degreaser. Contact us for help kitting out a crew.

Which gloves suit oil, filter and grease work?

A disposable nitrile glove with grip for fluid and filter changes; a nitrile-coated reusable glove for all-day handling of oily parts.

  • Black Diamond Grip: XtraGuard Black Diamond Grip is 6.5 g nitrile with a diamond texture over the whole glove, so oily spin-on filters and wet hoses stay in hand. Black hides oil and grime.
  • Orange Diamond Grip: XtraGuard Orange Diamond Grip has the same grip in high-visibility orange, so supervisors can see glove use and torn fragments are easier to find.
  • Reusable: the DuraFlex HiVis Sandy Nitrile and Black Knight GNN192 have a 13-gauge knit shell with a nitrile palm coating that grips in wet and oily conditions and helps keep oil off the skin. The GNN192 is machine washable.

Are the nitrile gloves rated for fuel, solvents and chemicals?

Not to a chemical permeation test on any of our listings. The XtraGuard Black disposable glove is described as chemical resistant and meets ASTM D6319, EN 455 and AS/NZS 4011:2014, which are standards for single-use examination gloves, not chemical breakthrough ratings.

For solvents or aggressive chemicals, check the product's SDS for the glove type it specifies before relying on any of these gloves.

Which gloves for sheet metal, glass and rough materials?

The SR515 for cut risk; the riggers gloves for abrasion and rough handling.

  • Cut risk: the SR515 has a Dyneema shell rated Cut Level C under EN 388:2016+A1:2018 (Cut 5 on the old EN 388:2003 scale), for sheet metal, glass and stamped parts. Its PU palm grips best on dry or lightly oiled surfaces; on parts covered in cutting fluid or heavy oil, a nitrile-coated glove holds better. Cut-resistant isn't cut-proof, so keep it away from moving blades and rotating equipment.
  • Abrasion and punctures: the cowhide riggers gloves are full-grain leather, EN388 compliant, with a wing thumb and shirred wrist.

Do you stock respiratory protection for fumes or oil mist?

No. The 3M 9123 P2 respirator filters non-oily particles only: dust, smoke particles, pollen and PM2.5/PM10. It gives no protection against exhaust gases, solvent and paint vapours, or fuel and chemical fumes, and it's the wrong choice for oil mist from lubrication and compressed-air work.

For respirable crystalline silica from cutting or grinding concrete or stone, selection and fit testing fall under AS/NZS 1715 and call for an occupational-grade respirator, which we don't list.

Which gloves are latex-free or food safe?

All three XtraGuard nitrile gloves are latex-free and powder-free, so one glove can be issued across a crew with latex sensitivities. The Black Diamond Grip and Orange Diamond Grip are also food safe, and the Black Diamond Grip is listed on the ARTG (426614).