Spill Containment (10)

Spill containment equipment stops fuel, oil and chemical leaks reaching floors, soil and stormwater drains. It comes in two parts: bunding and spill pallets that sit under drums and IBCs to catch slow leaks and sudden failures where liquids are stored, and spill kits and absorbents that deal with what escapes during transfer, refuelling or a burst hose.

Workshops, depots, farms, mine sites and service trucks generally need both. Match the bund to what it stores, and size the kit to the biggest volume you could lose in one go. Without either, a split drum turns into a clean-up bill and a possible EPA problem. Start with the sub-ranges in the guide below.

Ultraflo – AF-UF-120OFSK – 120L oil and fuel spill kit with contents – front view

10 products

  • Ultraflo – AF-SC-205LL4D – LL Series poly 4 drum spill pallet – three-quarter view
    Sold out
    Vendor:
    A-FLO Equipment

    AF-SC-205LL4D LL Series Poly 4 Drum Spill Pallet, 2,700 kg Load Rating

    Regular price $658.90 AUD
    Sale price $658.90 AUD Regular price
  • Ultraflo – AF-UF-240OFSK – 240L oil and fuel spill kit with contents – front view
    Vendor:
    A-FLO Equipment

    AF-UF-240OFSK 240L Oil & Fuel Spill Kit, Mobile Bin with Lid

    Regular price $561.00 AUD
    Sale price $561.00 AUD Regular price
  • Ultraflo – AF-UF-120OFSK – 120L oil and fuel spill kit with contents – front view
    Sold out
    Vendor:
    A-FLO Equipment

    AF-UF-120OFSK 120L Oil & Fuel Spill Kit, Mobile Bin with Lid

    Regular price $360.80 AUD
    Sale price $360.80 AUD Regular price
  • Ultraflo – AF-UF-40OFSK – 40L oil and fuel spill kit with contents – front view
    Vendor:
    A-FLO Equipment

    AF-UF-40OFSK 40L Oil & Fuel Spill Kit, Slimline Waterproof Carry Bag

    Regular price $140.80 AUD
    Sale price $140.80 AUD Regular price
  • Ultraflo – AF-SC-PSP2 – Eco poly 2 drum spill pallet, loaded with drums – three-quarter view
    Sold out
    Vendor:
    A-FLO Equipment

    AF-SC-PSP2 Eco Poly 2 Drum Spill Pallet, for 2 x 205L Drums

    Regular price $915.20 AUD
    Sale price $915.20 AUD Regular price
  • Ultraflo – AF-SC-PSP4 – Eco poly 4 drum spill pallet, loaded with drums – three-quarter view
    Sold out
    Vendor:
    A-FLO Equipment

    AF-SC-PSP4 Eco Poly 4 Drum Spill Pallet, for 4 x 205L Drums

    Regular price $955.90 AUD
    Sale price $955.90 AUD Regular price
  • A-FLO Equipment AF-SC-2IBCLL Poly Dual IBC Spill Pallet – Orange with IBC, Main View
    Vendor:
    A-FLO Equipment

    AF-SC-2IBCLL LL Series Poly Dual IBC Spill Pallet, 3,000 kg Load Rating

    Regular price $2,737.90 AUD
    Sale price $2,737.90 AUD Regular price
  • A-FLO Equipment AF-SC-1IBCLL Poly Single IBC Spill Pallet – Orange with IBC, Main View
    Vendor:
    A-FLO Equipment

    AF-SC-1IBCLL LL Series Poly Single IBC Spill Pallet, 1,500 kg Load Rating

    Regular price $2,066.90 AUD
    Sale price $2,066.90 AUD Regular price
  • A-FLO AF-ZS-22 Z-Sorb Industrial Oil Absorbent 22L
    Vendor:
    A-FLO Equipment

    Z-Sorb Industrial Oil Absorbent 22L

    2 in stock
    Regular price $38.50 AUD
    Sale price $38.50 AUD Regular price
  • A-FLO AF-ES-30 Enviropeat Organic Spill Absorbent 30L
    Vendor:
    A-FLO Equipment

    Enviropeat Organic Spill Absorbent 30L

    2 in stock
    Regular price $43.50 AUD
    Sale price $43.50 AUD Regular price

Bunding or spill kit: which do I need?

Most sites need both, because they do different jobs. A bund is passive: it sits under stored containers and holds whatever leaks out until someone deals with it. A spill kit is for response, when liquid escapes somewhere a bund can't reach.

What rules apply to storing fuel and oil?

Check your state EPA guidance and AS 1940. AS 1940 sets out storage and handling requirements for flammable and combustible liquids, while EPA guidelines describe how bunds should be sized and built. Requirements vary by state, liquid and volume, so confirm with your EPA or local council before you plan a storage area.

Planning containment for your site

Walk the site and work out where a spill could start and where it would run. Then check:

  • The volume of the largest container and the total stored in each area.
  • Liquid type: oil, fuel, coolant, AdBlue or corrosive chemicals.
  • Indoor or outdoor storage, and whether rain can fill an open bund.
  • Forklift access and load ratings for full containers.
  • Nearby drains, pits and waterways that need protecting.

Move drums safely with drum handling accessories, catch drained oil with waste oil equipment, or get in touch to talk through storage on your site.

Do we need a spill pallet, a spill kit, or both?

Most sites storing drums or IBCs need both, because they do different jobs.

  • Spill pallets: passive containment. Drums or an IBC stand over a sump, so a leaking bung, tap or valve drains into the pallet instead of the floor drain.
  • Spill kits and absorbents: response. Booms ring the spill, pads take up free liquid and loose absorbent deals with what's left, for spills outside the bund such as decanting splashes, a burst hose or a dropped drum.

A pallet does nothing for a spill on the workshop floor, and a kit does nothing for a drum that weeps overnight.

Will these products handle chemicals as well as oil and fuel?

Partly. Our spill kits are for oil, fuel and other hydrocarbons; the 120L and 240L kits also cover solvents and Class 3 hydrocarbons. None of the kits is for acids, alkalis or aggressive chemicals.

  • Loose absorbent: Z-Sorb takes oils, petroleum products, chemicals, acids and alkalis, and helps suppress vapours during a clean-up.
  • Spill pallets: poly construction (100% polyethylene on the LL Series), but A-FLO doesn't publish a chemical-by-chemical compatibility list. Ask us to check before you store solvents, acids or other aggressive products on one.

We don't list a dedicated chemical spill kit. If your site handles acids or alkalis in volume, tell us what you store and we'll source one.

Will your spill pallets and kits make our site compliant?

They support compliance; they don't guarantee it, because the requirement depends on what your site stores and how much.

  • Spill kits: the 120L and 240L kits comply with AusSpill quality guidelines, are tested to BS 5979, and support AS 1940:2017 compliance as part of your site's wider spill response plan.
  • Spill pallets: A-FLO doesn't cite AS 1940 or another named standard for them. Only the IBC pallets have a confirmed sump capacity: 1,200L on the single IBC pallet and 1,800L on the dual IBC pallet. The 4 drum LL pallet's 240L figure isn't confirmed in A-FLO's datasheet, and the Eco pallets have none. Check any pallet's sump against your site's dangerous goods or EPA bunding requirement before relying on it.