How does an engine flush work?
An engine flush is a detergent and solvent blend added to the old oil just before it is drained. The engine idles for the time stated on the label while the flush loosens sludge and varnish, then everything comes out with the oil. Drain fully, fit a new oil filter and refill with the grade the OEM specifies. On a badly neglected engine, loosened deposits can collect on the oil pick-up screen, so check the OEM manual before flushing one.
Do injector cleaners work in diesel and petrol engines?
Only when the product is made for that fuel. Diesel injector cleaners target deposits in common rail and older injection systems, while petrol cleaners target injector and intake deposits. Most are dosed into the tank, ideally before a fill so the cleaner mixes through the fuel. Follow the dose rate on the label rather than guessing.
- Oil or fuel: flushes go in the sump, injector cleaners go in the tank.
- Fuel type: diesel and petrol cleaners are formulated differently.
- Dose rate against your sump or tank size.
- Emissions hardware: check the label says it is suitable for vehicles with a DPF or catalytic converter.
- Pack size to match how many vehicles you treat.
What won't an injector cleaner fix?
It won't remove water or microbial growth from a tank, and it can't repair a worn or damaged injector. If filters are blocking early or the separator bowl shows water or sludge, the fuel itself needs testing and treating first.
Fit a fresh filter from our oil filter range with every flush, and refill from engine oils to the OEM grade. For water or diesel bug, go to fuel treatments and biocides, or contact us for advice.
