Flow Meters (All Fluids) (8)

Flow meters measure the fuel, oil, AdBlue or coolant leaving a tank, so workshops and fleets can charge fluid to jobs, track usage per machine and reconcile stock. They fit in-line between pump and nozzle, on a dispensing gun, or into a fixed fuel management system. The fluid decides the meter type first. Turbine meters suit thin fluids such as diesel and AdBlue, while oval gear meters stay accurate on thicker oils.

Then match the flow range, connections and output: a display you read at the meter, or a pulser that feeds a remote system. A meter not rated for the fluid reads wrong or fails early, and petrol needs one certified for hazardous areas. The FAQ and guide below go deeper.

A-FLO Equipment AF-FP-553000 K33 Mechanical Diesel Flow Meter, 1 in BSP – Main View

8 products

  • A-FLO Ultraflo AF-UF-40A-M OM oval gear flow meter, angle view
    Vendor:
    A-FLO Equipment

    AF-UF-40A-M OM Mechanical Oval Gear Flow Meter, 1-1/2" BSP, 15–250 lpm

    Regular price $3,131.70 AUD
    Sale price $3,131.70 AUD Regular price
  • A-FLO Ultraflo AF-UF-25A-M OM oval gear flow meter, angle view
    Vendor:
    A-FLO Equipment

    AF-UF-25A-M OM Mechanical Oval Gear Flow Meter, 1" BSP, 10–150 lpm

    Regular price $1,505.90 AUD
    Sale price $1,505.90 AUD Regular price
  • Piusi F00472A00 K600/3 oval gear meter with digital display for diesel, oil, and antifreeze fluids
    Vendor:
    PIUSI

    F00472A00 K600/3 Oval Gear Pulser, Diesel, Oil & Antifreeze, 1" BSP

    Regular price $1,381.60 AUD
    Sale price $1,381.60 AUD Regular price
  • Piusi F00408Y00 K24 ATEX aluminium turbine flow meter with digital display for hazardous environments
    Vendor:
    PIUSI

    F00408Y00 K24 ATEX/IECEx Pulser, No Display, 92 Pulses/L, 1" BSP

    Regular price $529.10 AUD
    Sale price $529.10 AUD Regular price
  • PIUSI F00408X00 K24 ATEX/IECEx digital flow meter, angle view
    Vendor:
    PIUSI

    F00408X00 K24 ATEX/IECEx Digital Flow Meter, Petrol & Diesel, 1" BSP

    Regular price $658.90 AUD
    Sale price $658.90 AUD Regular price
  • PIUSI F00408100 K24-A digital turbine flow meter, angle view
    Vendor:
    PIUSI

    F00408100 K24-A Digital Turbine Flow Meter, Diesel, 1" BSP M/F

    Regular price $459.80 AUD
    Sale price $459.80 AUD Regular price
  • A-FLO Equipment AF-FP-553000 K33 Mechanical Diesel Flow Meter, 1 in BSP – Main View
    Vendor:
    A-FLO Equipment

    AF-FP-553000 K33 Mechanical Diesel Flow Meter, 3 Digit, 1" BSP, 20-120 lpm

    1 in stock
    Regular price $459.80 AUD
    Sale price $459.80 AUD Regular price
  • PIUSI F0040710A K24 In-Line Digital Flow Meter – Adblue and Water, 1 Inch BSP Inlet/outlet, 10 Bar, 6-120 Lpm
    Vendor:
    PIUSI

    F0040710A K24 In-Line Digital Flow Meter, Adblue & Water, 1" BSP inlet/outlet, 10 bar, 6-120 lpm

    Regular price $535.70 AUD
    Sale price $535.70 AUD Regular price $535.70 AUD

Turbine, oval gear or mechanical meter?

It depends on the fluid's viscosity and how you want to read the result. Turbine meters are compact and usually digital, and they're accurate on low-viscosity fluids like diesel, AdBlue and water. Oval gear meters are positive displacement: each turn of the gears passes a fixed volume, so they hold accuracy on oils across a wide viscosity range. Mechanical meters read directly off a register and need no battery.

What is a pulser flow meter?

A pulser sends an electrical pulse for each set volume of fluid to a fuel management system, controller or remote display. It doesn't show a reading on its own. Check that the pulse rate and signal type suit the system you're connecting it to before you buy.

How accurate is a flow meter?

As accurate as its calibration. Fluid, temperature and flow rate all shift the reading, so calibrate on site with your own fluid at your normal pumping speed. Fit a strainer ahead of gear-type meters, because debris can jam the gears. Compare meters on these points:

  • Fluid compatibility and viscosity range
  • Flow range covering your pump's output
  • Inlet and outlet thread and size
  • Maximum working pressure
  • Display, mechanical register or pulse output
  • Hazardous area certification for petrol
  • Field calibration method

The FAQ below answers the most common setup questions. Meters pair with electric diesel pumps and oil equipment, and DEF-rated options sit in AdBlue flow meters. For a fleet system, get in touch.

Do I need an ATEX meter for petrol or kerosene?

Yes. Petrol and kerosene, or any meter in a potentially explosive atmosphere, need one of the three ATEX-certified meters:

The pump, hose and nozzle on that line each need their own rating for the fluid and zone. For diesel outside hazardous areas you don't need ATEX: the standard K24-A F00408100 is the lower-cost K24, rated for diesel and biodiesel. Diesel, oil and antifreeze meters for safe areas are compared in the table above.

Can I use a diesel or oil flow meter for AdBlue?

No. The only meter here rated for AdBlue is the K24 F0040710A, which has a reinforced polyamide body. None of the diesel, fuel and oil meters lists AdBlue, the K33 listing rules it out, and their bodies or measuring chambers are aluminium. Keep those meters on fuel and oil.

For the materials AdBlue equipment must avoid, and the rest of an AdBlue setup, see AdBlue equipment.

Should I get a digital, mechanical or pulser meter?

Decide where the litres need to be read and whether there's power at the meter.

  • Digital display, battery powered: the K24 meters show a resettable partial, a running total and the flow rate on an LCD that turns to suit the install. The K24-A and the AdBlue K24 run on two AAA batteries and the ATEX display meter on one 3 V lithium battery, all included.
  • Mechanical, no power at all: the K33, K150 ATEX and OM oval gear meters (1", 1-1/2") read on a geared register, so there are no batteries to replace on a remote tank. The OM meters also keep a non-resettable total.
  • Pulser, read somewhere else: the K600/3 and the K24 ATEX F00408Y00 have no display and send a pulse signal, the K600/3 over a wire up to 10 m long, so the quantity can be logged from the office. Neither has a battery, and the counter or management system that reads the pulses is not included or listed here, so plan that system first.

Can I put any of these meters after a pump?

Not the K33 or the K150. Both are rated to 3.5 bar, so they belong on gravity-feed or low-pressure transfer lines, never downstream of a pump that can push past 3.5 bar.

The K24 meters are rated to 20 bar (10 bar for the AdBlue K24) and the K600/3 pulser to 30 bar. Check your pump's maximum outlet pressure against the table before you choose. The OM oval gear meters' pressure rating isn't on the listing, so ask us before fitting one on a pumped line.

On a gravity-fed tank, go the other way and pick a meter with low pressure drop: the OM meters and the K33 are suited to gravity feed, and the K24's pressure drop is under 0.03 bar at 120 lpm.

What connections do the meters have, and what else do I need to fit one?

All are BSP, but the thread gender, flanges and flow direction differ.

  • K24 diesel and ATEX meters (F00408100, F00408X00, F00408Y00): 1" BSP male inlet and 1" BSP female outlet, so they fit standard Australian 1" BSP plumbing without an adapter. Piusi makes NPT versions on request. They read in either flow direction.
  • AdBlue K24 F0040710A: 1" BSP inlet and outlet.
  • K33 and OM 1" AF-UF-25A-M: 1" BSP female both ends. The OM 1-1/2" AF-UF-40A-M is 1-1/2" BSP female.
  • K600/3: mounts on the 1" BSP adjustable flanges supplied with it.
  • K150 ATEX: the 1" BSP flange kit is optional and sold separately, and this Ver.A meter must be fitted so fuel flows right to left.

Feeding a Graco hose reel? Graco reels have NPT ports, so plan a BSP to NPT adaptor between the meter and the reel.

Can I use these meters to sell fuel by the litre?

No. They're for stock control and job costing, not trade sales. Piusi says the K150 is not for measuring fuel sold to the general public, and the K33 cites no trade (NMI) approval, which makes it a stock-control meter. None of the other meter listings cites trade approval either.

Use them to log litres against each machine or job and to reconcile what leaves the tank. If you resell fuel or AdBlue by volume, the meter needs trade measurement approval, so check that status with the maker before you buy for that purpose.

How accurate are the meters, and can I recalibrate them?

Most read to ±1%, the K600/3 pulser to ±0.5%, and most can be recalibrated on site.

  • K24 meters: ±1%, with repeatability of 0.2% on the K24-A and 0.3% on the ATEX models; the K24-A and K24 ATEX display meter can be recalibrated. The AdBlue K24's ±1% is quoted after calibration, so calibrate it once installed.
  • K33: ±1%, field calibration possible. K150 ATEX: ±1%, 0.3% repeatability, easy to calibrate.
  • K600/3 pulser: ±0.5%, 0.2% repeatability.
  • OM oval gear meters: supplied calibrated with a standard calibration certificate.

The Piusi meters that list a reference fluid are factory calibrated on it: diesel at 16°C for the K24-A and K600/3, petrol at 16°C for the ATEX K24 and K150. If you meter a different fluid, check the reading against a known volume and recalibrate following the instruction manual.