Bulk Tank & Service Truck Filter Kits (6)

Bulk tank filter kits clean diesel as it's pumped out of a storage tank or service truck, so dirt and water stop at the dispenser instead of reaching the machine. They suit farm tanks, depot and site storage, and service trucks refuelling gear in the field. A kit pairs the filter head with the right elements as a matched set, ready to plumb into the pump outlet. Flow rating comes first, because the kit has to keep pace with your pump, followed by micron rating and how it handles water. Undersize a kit and it chokes the pump, slows every fill and blocks early. Skip water control on a tank that sweats and the water heads straight for common-rail injectors. Compare flow ratings against your pump before you choose.

Bulk Tank & Service Truck Filter Kits

6 products

  • PIUSI F00611B00 Clear Captor Filter Assembly – 2x F00611030 5um Particulate Filter, 1 Inch BSP Inlet/outlet, 100 Lpm
    Vendor:
    PIUSI

    F00611B00 Clear Captor Filter Assembly, 2x F00611030 5um Particulate Filter, 1" BSP inlet/outlet, 100 lpm

    1 in stock
    Regular price $286.00 AUD
    Sale price $286.00 AUD Regular price
  • Donaldson X900097 CLFS Clean and Dry Diesel Kit – 7um, 375 Lpm
    Vendor:
    Donaldson

    X900097 CLFS Clean & Dry Diesel Kit, 7um, 375 lpm

    Regular price $3,206.90 AUD
    Sale price $3,206.90 AUD Regular price
  • Donaldson X900096 CLFS Clean and Dry Diesel Kit – 7um, 189 Lpm
    Vendor:
    Donaldson

    X900096 CLFS Clean & Dry Diesel Kit, 7um, 189 lpm

    Regular price $1,315.90 AUD
    Sale price $1,315.90 AUD Regular price
  • Donaldson X900098 CLFS Clean Diesel Kit – Compact Assembly, 7um, 121 Lpm
    Vendor:
    Donaldson

    X900098 CLFS Clean Diesel Kit, Compact Assembly, 7um, 121 lpm

    Regular price $757.40 AUD
    Sale price $757.40 AUD Regular price
  • Donaldson X900018 CLFS Diesel Kit – 4um, 375 Lpm
    Vendor:
    Donaldson

    X900018 CLFS Diesel Kit, 4um, 375 lpm

    Regular price $3,206.90 AUD
    Sale price $3,206.90 AUD Regular price
  • Donaldson P506073 CLFS Clean and Dry Diesel Kit – 4 micron, 189 Lpm
    Vendor:
    Donaldson

    P506073 CLFS Clean & Dry Diesel Kit, 4 Mic, 189 lpm

    Regular price $1,315.90 AUD
    Sale price $1,315.90 AUD Regular price

How do bulk diesel filter kits work?

Fuel passes through one or more filter stages after the pump and before the hose and nozzle. A particulate element traps dirt, while a water stage either coalesces fine droplets so they drop out or absorbs free water into the media. Two-stage setups usually put the particulate filter first, which protects the water stage from loading up with dirt.

Sizing a kit to your pump

Match the kit's rated flow to your pump's maximum output, or go larger. Filters restrict more as they load, so a kit running at its limit when new will slow fills well before its service life is up. If you run a high-flow pump into large machines, size for that peak rather than the average fill.

What to check before you order

Have your pump details handy.

  • Rated flow against your pump's maximum output
  • Micron rating, finer for fleets running common-rail engines
  • Water removal: particulate only, coalescing or water-absorbing
  • Port thread standard (BSP or NPT) to suit your pump and hose
  • Pressure rating, and whether a bypass valve is fitted
  • A differential pressure gauge, so elements are changed on condition

When elements are due, go to replacement filter elements. Fit a tank vent breather and match a pump from electric diesel transfer pumps. For overhead tanks, see gravity-fed filter kits, or get in touch to size a kit.

Should I choose a 4 micron or 7 micron dispenser kit?

If you are fuelling common-rail diesels, choose 4 micron. The 4 micron kits, P506073 at 189 lpm and X900018 at 375 lpm, are rated to reach Donaldson's diesel target of ISO 14/13/11 in a single pass. The 7 micron kits, X900098, X900096 and X900097, target a coarser ISO 16/14/11.

Donaldson labels its 7 micron fuel elements, DBB8777 and the compact DBB7733, as winter fuel filters. If cold, thicker fuel is your problem, that is the case for 7 micron. Otherwise, 4 micron is the one that gets diesel to the target.

How do I match a dispenser kit to my pump?

Pick a kit rated at or above your pump's maximum flow, then check the connections.

  • Up to 121 lpm: X900098, a single compact head with SAE-20 ports, supplied with SAE-20 to 1" BSPT adaptors.
  • Up to 189 lpm: P506073 or X900096, twin heads with 1-1/4" NPTF ports.
  • Up to 375 lpm: X900018 or X900097, twin heads with 1-1/2" SAE 4-bolt flange / 1-1/2" BSPP connections.

Push a kit past its rated flow and pressure drop climbs, which cuts flow at the nozzle and can damage the filter. All five Donaldson kits are rated to 24.1 bar working pressure.

Which replacement elements does my dispenser kit take?

Each Donaldson kit uses Donaldson spin-on elements:

  • X900098: one DBB7733 compact 7 micron fuel filter.
  • P506073 and X900018: DBB8666 4 micron fuel filter plus DBB0248 water-absorbing filter.
  • X900096 and X900097: DBB8777 7 micron fuel filter plus DBB0248.

The PIUSI Clear Captor takes two F00611030 5 micron cartridges; spares aren't listed separately yet, so ask us for those.

Can I fit a Clean Diesel kit to a gravity-fed tank?

No. Donaldson states its Clean Diesel and Clean & Dry kits are not recommended for gravity-fed or low-pressure applications. They are built for pumped fuel dispensers, mobile service trucks and portable tanks. For an overhead or gravity tank, use one of our gravity-fed tank kits, rated to 220 lpm.

Where does the PIUSI Clear Captor fit compared with the Donaldson kits?

The Clear Captor is a particulate filter for pumped transfer up to 100 lpm, with two 5 micron cartridges, a clear bowl that shows what it has caught and a drain valve at the base. It can go on the suction or delivery side, has 1" BSP ports and is rated to 5 bar.

What it doesn't do: absorb water, or carry a published ISO cleanliness target. Its 5 micron rating is listed at Beta 2, against Beta 2000 on the Donaldson elements, so treat it as a coarser stage. If you need water removal or a stated ISO 14/13/11 result for common-rail engines, use a Donaldson Clean & Dry kit such as P506073.

What else do I need to install a dispenser kit?

Usually a tank breather, and adaptors if your plumbing is BSP.

  • Breather: Donaldson recommends a T.R.A.P. breather alongside its Clean Diesel kits to keep airborne dirt and moisture out of the tank, sized to suit the tank and its flow rates. See our T.R.A.P. breathers.
  • Adaptors: the X900098 comes with SAE-20 to 1" BSPT adaptors, but the 189 lpm kits have 1-1/4" NPTF ports and no BSP adaptors in their listed contents, so allow for them on BSP plumbing.

Replacement heads for the X900098 and the 189 lpm kits are in our filter heads.