Conventional Engine Oils (1)

Conventional engine oil, also called mineral oil, is refined from crude oil without synthetic base stocks and suits older petrol and diesel engines whose handbook lists a mineral multigrade. Classic cars, older farm vehicles, high-kilometre utes and engines designed before thin synthetics became the factory fill are the usual users. In an engine built around it, a correctly graded mineral oil does the job well when it's changed on schedule, and it's the most affordable option.

Choose by the viscosity grade on the filler cap or in the manual, then check the API rating on the label meets the engine's requirement. Use mineral oil in a modern engine that specifies a synthetic and it won't hold up across the drain interval. The guide below explains when mineral oil is the right call.

Conventional Engine Oils

1 product

  • Valvoline 1054.05 XLD Premium 20W50 Mineral Engine Oil 5L
    Vendor:
    Valvoline

    1054.05 XLD Premium 20W50 Mineral Engine Oil 5L

    Regular price $50.65 AUD
    Sale price $50.65 AUD Regular price

When should you use mineral engine oil?

Use it where the engine maker lists it. Older engines were designed and tested on mineral oils, and a correctly graded mineral multigrade remains the right fill for many of them. Heavier multigrades are common here because they suit older designs and engines with some wear.

How often should mineral oil be changed?

Follow the engine maker's service schedule. Mineral oil oxidises and thins faster than synthetic under sustained heat, so don't stretch it past the interval in the manual. Towing, dusty conditions and lots of short trips call for the severe-service interval where the manual gives one.

What to check before you buy

  • Viscosity grade: thicker grades flow more slowly on a cold start, so use the grade the engine maker lists.
  • API service category: the label should meet or exceed the one in the manual.
  • Flat-tappet camshafts: some older engines need more anti-wear additive than current passenger car specs allow, so check the oil's data before you buy.
  • Engine condition: an engine that has always run mineral oil is often best left on it.

Need a lighter or more modern oil? See semi-synthetic engine oils or straight-grade monograde oils, and pick up a matching spin-on oil filter. Not sure what an old engine needs? Ask us.

What engines is XLD 20W-50 for?

Classic and older engines that call for a 20W-50. XLD Premium 20W-50 is a mineral oil with an additive system Valvoline designed for older classic engines. It carries API SL for petrol and API CF for diesel, and can be used in petrol, diesel and LPG commercial vehicles where SAE 20W-50 with API SL/CF is recommended.

Can I use XLD 20W-50 in a modern engine?

Not unless the manual lists it. XLD is rated API SL for petrol and API CF for diesel, older categories than the API SP, ACEA C-class or API CK-4 specs that later engines are built around, so it won't meet a modern engine's spec before you even look at the grade.

If your manual lists one of those newer categories, choose from our semi-synthetic or synthetic oils, or heavy-duty diesel oils for trucks and machines.

Does XLD 20W-50 come in larger packs?

We list XLD 20W-50 in the 5L pack. Valvoline also makes it in 1L, 4L and 205L, so if you need a drum for a workshop or a shed of older machines, ask us for part 1054.51.