Air Intake & Exhaust (281)

Air intake and exhaust parts are everything that gets clean air into a diesel engine and spent gas out of it, apart from the filter element itself. That means air cleaner housings, pre-cleaners, inlet hoods and rain caps, rubber elbows, hump hoses and reducers, silicone charge air connectors, clamps, vacuator valves and restriction indicators, plus stainless exhaust flex tubing, for trucks, tractors, gensets and off-highway machines. On the intake side, most dust that reaches an engine gets in through a leak rather than through the filter, so pipe diameter and a sound seal at every joint matter as much as the element. On the exhaust side, flexible joints and the right clamps stop vibration cracking pipe and mufflers. Choose a part type from the list below.

Air Intake & Exhaust

281 products

  • Donaldson P149099 Vacuator Valve – 1.00 Inch / 25 mm Diameter, 60 Duro, Suits ERA, EBA, EBB and ECG
    Vendor:
    Donaldson

    P149099 Vacuator Valve, 1.00" / 25 mm diameter, 60 Duro, suits ERA, EBA, EBB & ECG

    Regular price $6.30 AUD
    Sale price $6.30 AUD Regular price
  • Donaldson H001249 Full-View Pre-cleaner- 3.00 in / 76 mm Outlet
    Vendor:
    Donaldson

    H001249 Full-View Pre-cleaner- 3.00 in / 76 mm outlet

    6 in stock
    Regular price $74.40 AUD
    Sale price $74.40 AUD Regular price
  • Donaldson P016330 Clear Pre-cleaner Bowl – Suits 3- 4.5 Inch Pre-cleaner Assembly
    Vendor:
    Donaldson

    P016330 Clear Pre-cleaner Bowl, suits 3- 4.5" Pre-cleaner Assembly

    3 in stock
    Regular price $38.80 AUD
    Sale price $38.80 AUD Regular price
  • Donaldson P020227 Clear Pre-cleaner Bowl – Suits 2- 3 Inch Pre-cleaner Assembly
    Vendor:
    Donaldson

    P020227 Clear Pre-cleaner Bowl, suits 2- 3" Pre-cleaner Assembly

    2 in stock
    Regular price $23.60 AUD
    Sale price $23.60 AUD Regular price
  • Donaldson H002040 Full View Pre-cleaner- 2.00 in / 51 mm Outlet
    Vendor:
    Donaldson

    H002040 Full View Pre-cleaner- 2.00 in / 51 mm outlet

    4 in stock
    Regular price $86.10 AUD
    Sale price $86.10 AUD Regular price
  • Donaldson P158914 Vacuator Valve – 2.00 Inch / 51 mm Diameter, 50 Duro, Suits FWA
    Vendor:
    Donaldson

    P158914 Vacuator Valve, 2.00" / 51 mm diameter, 50 Duro, suits FWA

    4 in stock
    Regular price $13.40 AUD
    Sale price $13.40 AUD Regular price
  • Donaldson P103198 Vacuator Valve – 3.00 Inch / 76mm Diameter, 40 Duro, Suits FRG, FHG, FTG, FWA, FWG
    Vendor:
    Donaldson

    P103198 Vacuator Valve, 3.00" / 76mm diameter, 40 Duro, suits FRG, FHG, FTG, FWA, FWG

    3 in stock
    Regular price $20.50 AUD
    Sale price $20.50 AUD Regular price
  • Donaldson H002042 Full View Pre-cleaner- 1.75 in / 44 mm Outlet
    Vendor:
    Donaldson

    H002042 Full View Pre-cleaner- 1.75 in / 44 mm outlet

    2 in stock
    Regular price $83.70 AUD
    Sale price $83.70 AUD Regular price
  • Donaldson P020344 Clear Pre-cleaner Bowl – Suits 4- 5 Inch Pre-cleaner Assembly
    Vendor:
    Donaldson

    P020344 Clear Pre-cleaner Bowl, suits 4- 5" Pre-cleaner Assembly

    2 in stock
    Regular price $45.70 AUD
    Sale price $45.70 AUD Regular price
  • Donaldson H001251 Full-View Pre-cleaner- 2.50 in / 64 mm Outlet
    Vendor:
    Donaldson

    H001251 Full-View Pre-cleaner- 2.50 in / 64 mm outlet

    1 in stock
    Regular price $77.20 AUD
    Sale price $77.20 AUD Regular price
  • Donaldson H000821 Full View Pre-cleaner- 3.75 in / 95 mm Outlet
    Vendor:
    Donaldson

    H000821 Full View Pre-cleaner- 3.75 in / 95 mm outlet

    Regular price $137.90 AUD
    Sale price $137.90 AUD Regular price
  • Donaldson H001250 Full View Pre-cleaner- 2.25 in / 57 mm Outlet
    Vendor:
    Donaldson

    H001250 Full View Pre-cleaner- 2.25 in / 57 mm outlet

    2 in stock
    Regular price $86.20 AUD
    Sale price $86.20 AUD Regular price
  • Donaldson P148346 T-Bolt Clamp – 5.5 in / 151-158 mm, Stainless Steel
    Vendor:
    Donaldson

    P148346 T-Bolt Clamp, 5.5 in / 151-158 mm, Stainless Steel

    2 in stock
    Regular price $15.00 AUD
    Sale price $15.00 AUD Regular price
  • Donaldson P148342 T-Bolt Clamp – 3.5 in / 98-104 mm, Stainless Steel
    Vendor:
    Donaldson

    P148342 T-Bolt Clamp, 3.5 in / 98-104 mm, Stainless Steel

    2 in stock
    Regular price $13.70 AUD
    Sale price $13.70 AUD Regular price
  • Donaldson P148350 T-Bolt Clamp – 10 in / 267-277 mm, Stainless Steel
    Vendor:
    Donaldson

    P148350 T-Bolt Clamp, 10 in / 267-277 mm, Stainless Steel

    4 in stock
    Regular price $32.00 AUD
    Sale price $32.00 AUD Regular price

Where do intake leaks usually happen?

At the joints on the clean side, between the filter housing and the turbo. Perished elbows, cracked humps and loose clamps all let unfiltered air in, and because a leak lowers restriction, the indicator won't warn you. Check every joint by hand at each filter service.

What's the difference between intake hose and charge air hose?

Pressure and heat. Intake hose runs from the air cleaner to the turbo under slight vacuum, so rubber elbows and humps do the job. Charge air hose runs from the turbo through the intercooler to the manifold under boost, which calls for reinforced silicone connectors and clamps made for them.

Why fit flex tubing in an exhaust?

Engines rock on their mounts and exhaust pipe grows as it heats. Flex tubing absorbs that movement so rigid pipe, muffler joints and the turbo outlet don't crack.

Elements are in air filters. Send photos or part numbers through the contact page and we'll help piece an intake or exhaust together.

Which part of the air intake range do I need?

Start with the job you're doing, then go to that section:

The filter elements themselves are in air filters.

Pre-cleaner or inlet hood: what goes on top of my intake stack?

It depends whether you're fighting dust or weather. An inlet hood sheds rain, snow and coarse debris before they reach the pre-cleaner or filter, but it does nothing about dust. A pre-cleaner spins dust out of the incoming air before the filter sees it.

  • Dusty work: fit a pre-cleaner. The Fleetguard AP series is also listed for rain, snow, leaves and chaff as well as dust.
  • Clean air, open weather: an inlet hood on the working stack keeps water and coarse debris off the element.

A hood is not a cheaper pre-cleaner. If the elements are loading up early, the hood won't change that.

Do these intake parts fit any brand of air cleaner?

Elbows, hump hoses and hose clamps, yes: they go by pipe and hose diameter, not by the air cleaner's brand. The rest are tied to a housing family or a fitting:

  • Vacuator valves: most of ours are Donaldson valves listed for Donaldson air cleaner families (FRG, FHG, STG and so on); the 3946457S is Fleetguard's OptiAir dust ejection valve.
  • Mounting bands: the steel bands go by body diameter and bolt spacing; the plastic and polymer bands are listed for Donaldson FPG housings.
  • Covers: the P539422 is for Donaldson FPG06 air cleaners only.
  • Restriction indicators: most screw into a threaded port, and the ones that list a thread are 1/8 NPT. The integrated Filter Minder indicators are made only for Donaldson's new-generation FRG and ERB air cleaners.

If you're matching a valve or band to a housing we don't list, send us the old part's number and we'll match it.

Which intake parts can go on the turbo, charge-air or exhaust side?

None of the rubber ones. Our rubber elbows, hump hoses and reducers are EPDM rated -40 to 100°C, and Donaldson lists them for the clean side only, between the air cleaner and the turbo inlet. Each side of the engine has its own parts:

The clamps page sorts the clamp types by joint.

What should I check while the air cleaner is open?

Everything that can let dust round the element, because dust that gets in after the filter has nothing to stop it.

  • Restriction indicator: read it before the element comes out, so you know whether it was actually due. See restriction indicators.
  • Dust valve: the vacuator valve on the bottom of the housing. Replace it if it's perished, hardened, torn or missing.
  • Pre-cleaner: empty a Full View bowl, and check a self-cleaning unit's discharge isn't packed with mud or chaff. See pre-cleaners.
  • Safety element: check whether it's due under your service schedule.
  • Cover and body: the cover should seat evenly, and a cracked or distorted body won't seal a new element. See air cleaner housings.
  • Mounting band: the housing shouldn't move on its bracket, because a housing that shifts can open the seal between element and body. See mounting bands.
  • Ducting: replace elbows and hump hoses that are cracked, split or hardened, and check the clamps are tight without cutting into the hose.