Oil Equipment (109)

Oil equipment is the gear that moves lubricant around a workshop, from the drum or bulk tank to the engine and back out again as waste. That means air operated and manual oil pumps, hose reels, metered dispensing guns, drum kits, storage jugs, funnels and waste oil drainers. Mechanics, fleet depots, farm sheds and lube trucks all run some version of the same setup. The choices that matter most are pump ratio, hose bore and length, and whether you need to meter every litre that goes in. Get the pump and line wrong and heavy oil crawls out of the gun, or the reel can't reach the far bay at a useful rate. Pick a category from the setup guide under the products.

Oil Equipment

109 products

  • Valvoline 8900 20mm Standard Black Plastic Drum Tap
    Vendor:
    Valvoline

    20mm Standard Black Plastic Drum Tap

    11 in stock
    Regular price $4.00 AUD
    Sale price $4.00 AUD Regular price
  • Graco 24G578 LD Series 3:1 Universal Oil Pump, BSPT Ports, with Bung Adapter – front view
    Vendor:
    Graco

    24G578 LD Series 3:1 Universal Oil Pump, BSPT Ports, with Bung Adapter

    Regular price $522.70 AUD
    Sale price $522.70 AUD Regular price
  • A-FLO AF-AP-1336B 20L Oil Pump with Hose Retail Box
    Vendor:
    A-FLO Equipment

    AF-AP-1336B 20L Oil Pump with Hose (Retail Box)

    2 in stock
    Regular price $66.00 AUD
    Sale price $66.00 AUD Regular price
  • Graco 203876 Fire-Ball 300 Series 5:1 Universal Oil Pump, NPT
    Vendor:
    Graco

    203876 Fire-Ball 300 Series 5:1 Universal Oil Pump, NPT

    Regular price $2,551.80 AUD
    Sale price $2,551.80 AUD Regular price
  • Graco 237526 Fire-Ball 425 Series 3:1 Universal Oil Pump, NPT
    Vendor:
    Graco

    237526 Fire-Ball 425 Series 3:1 Universal Oil Pump, NPT

    Regular price $5,497.80 AUD
    Sale price $5,497.80 AUD Regular price
  • Graco 24G588 LD Series 5:1 Universal Oil Pump with NPT Bung Adapter – front view
    Vendor:
    Graco

    24G588 LD Series 5:1 Universal Oil Pump with NPT Bung Adapter

    Regular price $675.80 AUD
    Sale price $675.80 AUD Regular price
  • Graco 25C903 EM8 Electronic Manual Oil Meter, Rigid Extension – left-front view
    Vendor:
    Graco

    25C903 EM8 Electronic Manual Oil Meter, Rigid Extension

    Regular price $571.80 AUD
    Sale price $571.80 AUD Regular price
  • Graco 25C904 EM8 Electronic Manual Oil Meter, Flexible Extension – left-front view
    Vendor:
    Graco

    25C904 EM8 Electronic Manual Oil Meter, Flexible Extension

    Regular price $432.60 AUD
    Sale price $432.60 AUD Regular price
  • Graco 238108 Fire-Ball 425 Series 6:1 Universal Oil Pump, NPT – front view
    Vendor:
    Graco

    238108 Fire-Ball 425 Series 6:1 Universal Oil Pump, NPT

    Regular price $5,601.80 AUD
    Sale price $5,601.80 AUD Regular price
  • Graco 25C918 EM20 Electronic Manual Oil Meter, Flexible Extension – left-front view
    Vendor:
    Graco

    25C918 EM20 Electronic Manual Oil Meter, Flexible Extension

    Regular price $1,224.30 AUD
    Sale price $1,224.30 AUD Regular price
  • Graco 247723 XDV20 Oil Control Valve, Flexible Extension, 3/4" NPT – left-front view
    Vendor:
    Graco

    247723 XDV20 Oil Control Valve, Flexible Extension, 3/4" NPT

    Regular price $716.10 AUD
    Sale price $716.10 AUD Regular price
  • Graco 247721 XDV20 Oil Control Valve, Flexible Extension, 1/2" NPT – left-front view
    Vendor:
    Graco

    247721 XDV20 Oil Control Valve, Flexible Extension, 1/2" NPT

    Regular price $673.40 AUD
    Sale price $673.40 AUD Regular price
  • Graco HSMD5F XD 30 Series Oil Hose Reel, 3/4" x 15 m Hose – right-front view
    Vendor:
    Graco

    HSMD5F XD 30 Series Oil Hose Reel, 3/4" x 15 m Hose

    Regular price $2,808.60 AUD
    Sale price $2,808.60 AUD Regular price
  • Graco 24G590 LD Series 5:1 Universal Oil Pump, BSPT Ports, with Bung Adapter – front view
    Vendor:
    Graco

    24G590 LD Series 5:1 Universal Oil Pump, BSPT Ports, with Bung Adapter

    Regular price $710.40 AUD
    Sale price $710.40 AUD Regular price
  • Graco 247722 XDV20 Oil Control Valve, Rigid Extension, 3/4" NPT
    Vendor:
    Graco

    247722 XDV20 Oil Control Valve, Rigid Extension, 3/4" NPT

    Regular price $673.40 AUD
    Sale price $673.40 AUD Regular price

What goes into a workshop oil system?

Four parts: a pump at the drum or tank, a hose or reel to carry the oil, a gun or valve to control it, and a way to deal with the waste. Each part has to suit the one before it, so plan the line as a whole rather than buying piece by piece.

How do you size an oil pump and hose?

Work back from the far end of the line. The longer the hose, the heavier the oil and the more outlets running at once, the more pressure the pump has to make. Light engine oil over a short hose suits a low ratio pump, while gear oil, cold mornings or a reel across the workshop call for a higher ratio and a larger hose bore. Every component downstream must be rated above the pump's maximum outlet pressure.

Do you need metered dispensing?

If oil is charged to jobs or counted for stock, yes. Unmetered guns are where workshops lose track of litres, and a meter makes the invoice match what went into the sump.

Planning a new bay? Talk the layout through with us, or see grease equipment and hose reels for all fluids for the rest of the workshop.

Which part of the oil equipment range do I need?

Start with the job the oil has to do next: come out of the container, travel to the machine, go in, wait on a shelf by grade, or come out as waste.

Graco gear is NPT and RAASM is BSP. Can I mix them in one oil system?

Yes, but every joint between the two brands needs the right adapter, so check threads before you order.

  • Graco (NPT): the Fire-Ball pumps, the EM8, EM20, SDM8 and PM8 meters, the XDV20 valves and the hose ends of the XDM65F, HSMD5F and HEM004 reels. The XDM65F and HSMD5F inlets are NPSM, a straight thread.
  • RAASM and Ultraflo (BSP): the RAASM stub pumps, the 390, 430, 530, 560 and 617 Series reels, the RAASM guns and the Ultraflo AF-A-102111B metered gun all use G (BSP) threads.
  • The common mismatch: a Graco meter or valve on a RAASM reel or BSP line needs a BSP to NPT adapter at the gun inlet.
  • BSP fittings: check whether yours seal on the thread (BSPT) or on a washer or O-ring (BSPP) before matching them to a port.

The fewest adapters come from staying in one brand from pump to gun. We don't list the adapters on the site, so tell us the two threads you're joining and we'll supply the right one.

Can I dispense coolant or antifreeze with this oil equipment?

Partly. Several reels and guns are rated for antifreeze, but none of our oil pumps are, so the pump is where a coolant line goes wrong.

  • Pumps: Graco rates its LD and Fire-Ball pumps for non-corrosive, non-abrasive oils and lubricants only, and RAASM rates its stub pumps for oils, lubricants and similar fluids. For coolant from a drum or IBC, RAASM lists its diaphragm pumps, such as the 3C1/40111NHH, for coolant; see our air operated transfer pumps.
  • Reels: RAASM rates its 430 and 530 Series oil reels for oils and antifreeze. Graco's oil reels are rated for motor oil, gear oil and ATF only; the Graco HEL010 is the LDX reel built for antifreeze.
  • Guns: the Graco EM8, EM20 and XDV20 are rated for antifreeze, and the SDM8 25M405 and 25M407 are dedicated antifreeze meters. The SDM8 oil models, the PM8 273157 and the RAASM guns are listed for oils, and the AF-FP-984330 isn't intended for water-based fluids.

Diesel and AdBlue need their own gear: see diesel equipment and AdBlue equipment.

Does an oil dispensing line need thermal relief and earthing?

Yes on any Graco line, and RAASM sets its own earthing check for its reels. Both protect the equipment and the person holding the gun.

  • Thermal relief: oil trapped between the pump and a closed gun expands as it warms, and Graco notes the pressure can build enough to rupture the pump or hose. Every Fire-Ball installation needs a relief kit matched to the pump: the 237601 and 240429 kits for the Fire-Ball 425 are in oil transfer accessories, and the Fire-Ball 300 kit, 237893, is available on request. LD pumps have relief built in but need a self-relieving air regulator so it can vent, and the EM8 and EM20 meters call for Graco's 237904 kit downstream of the pump.
  • Earthing: Graco requires the 222011 ground wire and clamp on its LD and Fire-Ball pumps and grounding of the hoses, reel and containers, using conductive hose. The XDM65F reel is grounded by bolting it to a grounded structure or using a conductive inlet hose, and the XD 40 reels by bonding them to the truck. RAASM requires the earth on its reels checked before commissioning.
  • Thread joints: Graco's EM and XDV20 instructions call for thread sealant rather than PTFE tape, which can break the ground path.
  • Shut-off: Graco also wants a fluid shut-off valve at each dispense position.

Where your site has its own earthing or hazardous-area rules, those apply on top of the manufacturers'.

Can you set up a multi-pump lube bay or container lube store?

Yes, from the same RAASM and Graco components we list, but a multi-point system is specified for the site rather than bought off the page. As an example, a published Lubestore mine-site build runs four RAASM 5:1 stub pumps on wall brackets, each with a 1/4" air regulator and gauge, an IBC bottom suction kit, a 15 m by 1/2" oil reel such as the RAASM 8430.402 and a digital metered gun.

Pump size depends on how many guns run at once and how far the oil travels, which is covered on our air-operated oil pumps page. Send us the oils, container sizes, number of dispense points and the run from pump to gun, and we'll put the parts list together.