Bulk Filter Heads & Manifolds (2)

Bulk filter heads are the mounting blocks that hold a filter element in a fuel or oil dispensing line, carrying the inlet and outlet ports and, on many designs, a bypass valve or gauge port. They're the base of any bulk filtration manifold, used by workshops, farms and site operators who build or maintain their own dispensing racks. Two things decide the choice: the port thread, so the head plumbs into your pipework without leaks, and which element series it accepts. A head forced onto the wrong thread will weep fuel under pump pressure or draw air on a suction line. One that takes the wrong element leaves you with a rack you can't service. Check both against your existing setup before you order.

Bulk Filter Heads & Manifolds

2 products

  • Donaldson P570330 Filter Head, 1 1/4" NPTF Ports, Clean Solutions
    Vendor:
    Donaldson

    P570330 Filter Head, 1 1/4" NPTF Ports, Clean Solutions

    Regular price $267.30 AUD
    Sale price $267.30 AUD Regular price
  • Donaldson P570329 Filter Head, SAE-20 Ports, Clean Solutions
    Vendor:
    Donaldson

    P570329 Filter Head, SAE-20 Ports, Clean Solutions

    Regular price $267.30 AUD
    Sale price $267.30 AUD Regular price

What does a bulk filter head do?

It holds the element and routes fluid through it. The head stays plumbed in permanently, so servicing means swapping the element rather than breaking the pipework. Some heads include a bypass valve that opens if the element blocks, keeping fluid moving but unfiltered, and a port for a differential pressure gauge so you can see when an element is due.

NPT, NPTF, BSP or SAE O-ring ports?

They don't interchange. NPT and NPTF are American tapered pipe threads, and NPTF is designed to seal on the thread itself. BSP is the British standard common on Australian pumps and hose fittings, in parallel and tapered forms. SAE O-ring boss ports use a straight thread and seal on an O-ring. Mixed threads can start by hand and still leak, so match the port to your fittings or use a proper adaptor.

Choosing a filter head

Match the head to your plumbing first, then to the element and pressure.

  • Port thread standard and size to suit your pipework
  • Element series the head accepts, and whether it matches heads already on your rack
  • Rated flow and maximum working pressure, both above what your pump can deliver
  • Bypass valve setting, or no bypass where unfiltered flow isn't acceptable
  • Gauge or indicator port for monitoring element restriction
  • Single head, or a manifold to run filters in series (particulate then water) or in parallel for more flow

Find elements in Clean & Dry replacement filters, see complete bulk tank filter kits and high pressure lube filters, or send us a photo of the head you're replacing.

Which filter head do I need: SAE-20 or 1-1/4" NPTF?

Match the ports to your plumbing, or the head to the kit you're repairing. Both are single Donaldson Clean Solutions heads with the same ratings: one spin-on element, up to 246 lpm, 24.1 bar working pressure, -40°C to 118°C, for all diesel fuels and lubricants.

  • P570329: SAE-20 O-ring ports. It's the head on the X900098 kit. Donaldson's P506076 adaptor takes it to 1" BSPT male; that adaptor isn't listed on its own, so ask us for it.
  • P570330: 1-1/4" NPTF ports. The 189 lpm Clean & Dry kits, P506073 and X900096, use two of them.

NPT and BSP threads don't seal in each other, so allow for adaptors on BSP plumbing.

Which elements fit these heads, and can I add a water stage?

Donaldson lists these heads for its Clean Solutions spin-ons: the diesel elements DBB5333, DBB7733, DBB8666 and DBB8777, the oil elements DBB8665, DBB8664 and DBB2533, and the DBB0248 water-absorbing filter. DBB2533 isn't listed on our site yet; ask us for it. The heads don't take Bulk hP elements.

For particulate and water removal, run two single heads in series with the particulate element first and the DBB0248 second, so dirt comes out before water. That's how the 189 lpm Clean & Dry kits are built: two P570330 heads joined by a P573642 1-1/4" NPT nipple.

Can I fit a pressure gauge or service indicator to these heads?

Yes. Donaldson pre-ports its heads for optional pressure gauges and service indicators, which is how you know when an element is due.

  • Gauge: P573681, 0–4.1 bar (0–60 psi), fitted with the P573682 adaptor. It comes in the X900098, P506073 and X900096 kits.
  • Visual service indicator: P165965 at 1.72 bar (25 psi), or P574177 at 3.45 bar, green to red.
  • Electrical service indicator: P174396, which switches at 40 psid and which Donaldson lists for all its Clean Solutions heads, for site monitoring.

The P573681 gauge, P573682 adaptor and P574177 aren't listed on our site yet, so ask us for those.