Automatic or manual AdBlue nozzle?
Automatic for pumped fill points, manual for gravity feed. An auto shut-off nozzle stops when the tank is full, so a busy operator can't overfill and waste fluid around the filler. Auto nozzles need a minimum flow to sense a full tank, which is why gravity-fed setups usually run a manual nozzle.
What is a magnetic AdBlue nozzle?
It's a nozzle that only opens when its spout sits inside a filler neck fitted with a magnetic adaptor. The system stops AdBlue going into a diesel tank by mistake, and it's common on trucks. Machines and vehicles without the adaptor need a non-magnetic nozzle, so check your fleet before buying, especially if you run a mix of trucks and plant.
Do I need a metered nozzle?
If DEF is charged to jobs or tracked per vehicle, a metered nozzle records each fill without adding a separate meter to the line. Compare nozzles on these points:
- Automatic shut-off, metered or manual
- Magnetic or non-magnetic spout
- Inlet thread and size to match your hose
- Rated flow against your pump's output
- Stainless steel or plastic wetted parts
- Swivel inlet and a hook or holster to keep the spout clean
Keep the spout off the ground between fills. Dirt on the spout goes straight into the vehicle's AdBlue tank.
Pair the nozzle with an AdBlue hose reel or an electric AdBlue pump, or add an AdBlue flow meter in-line. Unsure about your filler necks? Ask before you order.
