Do I need a bowl, a head or a full assembly?
Replace just the bowl if it's cracked, cloudy or leaking. Replace the head when its threads, ports or primer are worn, or go for a full assembly when adding filtration to an engine or upgrading from a basic in-line filter.
Matching a fuel filter bowl or head
- Thread: bowls thread onto the base of a spin-on or element, and heads must match the filter thread. Imperial and metric threads aren't interchangeable.
- Fuel type: confirm the bowl is rated for petrol, diesel or both.
- Sensor port: if a water-in-fuel sensor is wired to the old bowl, choose a ported one.
- Material: glass and clear plastic show water at a glance. Consider heat and impact exposure where it's mounted.
- Ports and mounting: head port sizes, priming pump and bracket pattern should match the existing plumbing.
Why replace a cloudy bowl?
A bowl that has gone cloudy or crazed hides the water you're meant to see, and fine cracks can open under vibration. Some solvents and cleaners attack clear plastic, so wipe bowls with a suitable cleaner only. Always fit new seals when the bowl comes off.
Pair the head or bowl with the right spin-on fuel water separator or spin-on fuel filter. Fitting out a boat? See marine fuel filters. For help matching a thread, get in touch.
