Which clamp suits which joint?
It depends on what's being joined. Use T-bolt clamps for rubber intake hose over a pipe, constant torque clamps for silicone charge air hose, V-band clamps where two machined flanges meet, and exhaust seal clamps for slip-fit or butt joints in exhaust tube.
Flat band or stepped exhaust clamp?
A flat band clamp suits a butt joint, where two pipes of the same diameter meet end to end. A stepped clamp suits a lap joint, where one pipe slides over the other, because the step follows the change in diameter. Both give a wide sealing band that doesn't crush the pipe the way a U-bolt does.
Why use constant torque clamps on silicone hose?
Hose compresses and relaxes as it heats and cools, which lets an ordinary clamp lose tension. A constant torque clamp has a spring stack that keeps pressure on the joint, and a lined band protects soft silicone from being cut. Tighten every clamp to its maker's figure, not by feel.
- Joint type: hose over pipe, flange, lap or butt
- Measured outside diameter at the joint
- Clamping range of the clamp
- Material and temperature for the position
- Room to reach and tighten the bolt
Size clamps alongside rubber elbows, silicone charge air connectors and exhaust flex tubing, or send us the joint size.
