Spin-on Hydraulic Filters (290)

Spin-on hydraulic filters thread straight onto the filter head as a sealed can, making them quick to change on return, charge and low-pressure lines in mobile and industrial machinery. They're common on tractors, loaders, excavators, truck hydraulics and power units, in cellulose and synthetic media. Most mount on a head in the return line, where pressure is low and all returning oil passes through. Micron rating and media are the specs that matter most, with thread and bypass setting close behind. A can that fits but filters too coarse lets fine contamination wear pumps and valves, while one that's too fine for the flow loads up quickly and opens its bypass. Thread and valve details follow below the products.

Spin-on Hydraulic Filters

290 products

  • Baldwin BT839-10 Hydraulic Filter – Spin-on, Low Pressure, 30 micron
    Vendor:
    Baldwin

    BT839-10 Hydraulic Filter- Spin-on, Low Pressure, 30 Mic

    Regular price $33.00 AUD
    Sale price $33.00 AUD Regular price
  • Baldwin BT8420 Hydraulic Filter – Spin-on, Low Pressure, Wire Mesh, 144 micron
    Vendor:
    Baldwin

    BT8420 Hydraulic Filter- Spin-on, Low Pressure, Wire Mesh, 144 Mic

    2 in stock
    Regular price $46.50 AUD
    Sale price $46.50 AUD Regular price
  • Baldwin BT839 Hydraulic Filter – Spin-on, Low Pressure, 40 micron
    Vendor:
    Baldwin

    BT839 Hydraulic Filter- Spin-on, Low Pressure, 40 Mic

    2 in stock
    Regular price $31.50 AUD
    Sale price $31.50 AUD Regular price
  • Baldwin BT8851-MPG Hydraulic Filter – Spin-on, Med Pressure, Synthetic Media, 8 micron
    Vendor:
    Baldwin

    BT8851-MPG Hydraulic Filter- Spin-on, Med Pressure, Synthetic Media, 8 Mic

    Regular price $137.50 AUD
    Sale price $137.50 AUD Regular price
  • Baldwin BT260-10 Hydraulic Filter – Spin-on, 10 micron
    Vendor:
    Baldwin

    BT260-10 Hydraulic Filter- Spin-on, 10 Mic

    1 in stock
    Regular price $31.50 AUD
    Sale price $31.50 AUD Regular price
  • Fleetguard HF6610 Hydraulic Filter – Spin-on
    Vendor:
    Fleetguard

    HF6610 Hydraulic Filter- Spin-on

    2 in stock
    Regular price $48.10 AUD
    Sale price $48.10 AUD Regular price
  • Fleetguard HF6177 Hydraulic Filter – Spin-on
    Vendor:
    Fleetguard

    HF6177 Hydraulic Filter- Spin-on

    7 in stock
    Regular price $58.60 AUD
    Sale price $58.60 AUD Regular price
  • Baldwin BT8850-MPG Hydraulic Filter – Spin-on, Med Pressure, Synthetic Media, 20 micron
    Vendor:
    Baldwin

    BT8850-MPG Hydraulic Filter- Spin-on, Med Pressure, Synthetic Media, 20 Mic

    Regular price $110.80 AUD
    Sale price $110.80 AUD Regular price
  • Baldwin BT387-10 Hydraulic Filter – Spin-on, 27 micron
    Vendor:
    Baldwin

    BT387-10 Hydraulic Filter- Spin-on, 27 Mic

    2 in stock
    Regular price $57.00 AUD
    Sale price $57.00 AUD Regular price
  • Baldwin BT371-10 Hydraulic Filter – Spin-on, 25 micron
    Vendor:
    Baldwin

    BT371-10 Hydraulic Filter- Spin-on, 25 Mic

    2 in stock
    Regular price $46.50 AUD
    Sale price $46.50 AUD Regular price
  • Baldwin BT366-10 Hydraulic Filter – Spin-on, 25 micron
    Vendor:
    Baldwin

    BT366-10 Hydraulic Filter- Spin-on, 25 Mic

    Regular price $39.00 AUD
    Sale price $39.00 AUD Regular price
  • Fleetguard HF7551 Hydraulic Filter – Spin-on
    Vendor:
    Fleetguard

    HF7551 Hydraulic Filter- Spin-on, Synthetic Media

    1 in stock
    Regular price $42.30 AUD
    Sale price $42.30 AUD Regular price
  • Fleetguard HF6700 Hydraulic Filter – Spin-on
    Vendor:
    Fleetguard

    HF6700 Hydraulic Filter- Spin-on

    Regular price $63.80 AUD
    Sale price $63.80 AUD Regular price
  • Fleetguard HF6535 Hydraulic Filter – Spin-on
    Vendor:
    Fleetguard

    HF6535 Hydraulic Filter- Spin-on

    3 in stock
    Regular price $24.70 AUD
    Sale price $24.70 AUD Regular price
  • Fleetguard HF6357 Hydraulic Filter – Cartridge
    Vendor:
    Fleetguard

    HF6357 Hydraulic Filter- Spin-on

    1 in stock
    Regular price $47.50 AUD
    Sale price $47.50 AUD Regular price

Cellulose or synthetic media?

Synthetic media generally offers higher capture efficiency, more dirt-holding capacity and lower restriction than cellulose, though cellulose is still specified on many circuits. Don't drop from synthetic to cellulose unless the machine maker allows it, as the oil will run dirtier.

Choosing a spin-on hydraulic filter

  • Micron rating: match what the system was built for, ideally comparing Beta-rated efficiency rather than nominal figures.
  • Media: cellulose or synthetic, as above.
  • Bypass valve: some cans carry their own, others rely on the head. The setting decides when oil starts going round the media.
  • Pressure rating: spin-ons suit return and low to medium pressure duty, not the full pressure side of the pump.
  • Thread and seal: large hydraulic cans can look alike across several thread sizes, so check the head.

When should I change a hydraulic spin-on?

At the OEM interval, after any component failure, or when a service indicator shows it's loaded. Cold oil can push an indicator into the red at start-up, so read it once the system is at working temperature.

Machines with a fixed housing take hydraulic filter elements, and replacement heads and gauges are in hydraulic filter heads and service indicators. Some cans are dual-rated for transmission use too, and the tank can be topped up from our hydraulic oil range.

The thread matches. What else has to match on a hydraulic spin-on?

The gasket profile, the filtration built into the can, and the length. Check each against the specifications on the product page and the filter you're removing.

  • Gasket: a round-section and a square-section seal don't sit the same way in the head. The wrong profile can feel tight and still weep once the circuit comes up to pressure.
  • Micron, media and bypass setting: all three are built into the can, so a can that fits the head isn't automatically the same grade of filter.
  • Length: a longer can may foul a guard or frame member even when the thread is right.

Before fitting, wipe the sealing face on the head clean and wet the new gasket with clean hydraulic oil. A dry seal drags as the can turns and can roll out of its groove.

Can I use a spin-on hydraulic filter on the pressure side of the pump?

Only on a low or medium-pressure circuit, and only when the can and head are rated for it. A spin-on is not a substitute for a high-pressure in-line filter.

Fleetguard's spin-on hydraulic range carries recommended working pressures of 1,724–2,758 kPa (17–28 bar) and maximum static ratings of 2,413–4,826 kPa (24–48 bar). Donaldson's medium-pressure Duramax HNK04 spin-ons, such as the P569206, are rated to 34.5 bar working. High-pressure in-line filters, by comparison, are rated up to 448 bar. Typical spin-on duty is return lines, suction lines, hydrostatic charge and pilot circuits, and powershift transmissions.

Check the circuit pressure in the machine manual against the rating on the filter and head. A spin-on in the wrong position risks a burst can, not just a short service life.

What does '20 psi BPV' in a spin-on's title mean, and does it have to match?

It's the bypass valve built into the can, and yes, match it. At that pressure difference across the media the valve opens and lets oil flow around the element, so the circuit isn't starved when the filter is loaded or the oil is cold and thick.

Baldwin's spin-ons here run from 2 psi (0.14 bar) to 50 psi (3.45 bar) bypass settings, and many have none, in which case any bypass protection sits in the head (Fleetguard and Baldwin both offer heads with bypass valves). Fit a lower setting and oil starts bypassing earlier. Fit a can with no valve on a head that relies on the can's valve, and a blocked element has no relief: Fleetguard warns that without a bypass or a gauge, a fully plugged element will collapse or burst.

Check the title or specifications and match the setting on the can you're removing.

Can I fit a longer spin-on to get more capacity?

Sometimes, where the head is made for both lengths and there's room. Some filter series offer a short and a long can on the same head; Fleetguard's HF6500 series, for example, lists 147 mm and 205 mm elements.

Fleetguard recommends choosing a filter that passes your flow at a clean pressure drop of 2–8 psid (0.14–0.55 bar), and avoiding anything above 9 psid (0.62 bar), because a high starting pressure drop shortens filter life.

Before swapping, check that the longer can has the same thread, gasket, micron rating and bypass setting, and that it clears guards and frame members. If the machine maker lists only one length, fit that one.

Water keeps getting into my hydraulic oil. Is there a spin-on that takes it out?

Yes, for the Donaldson heads. These cans carry a superabsorbent polymer that locks free water out of the oil as it passes:

Treat them as a drying stage, not the everyday filter. Most are rated Beta 2 at 10 micron, so they catch far less fine dirt than a particle can. Once the oil is dry, go back to the particle grade the circuit needs. A can that has taken up its water will block, so change it when the indicator shows bypass, and find out where the water is getting in.