Hydraulic Filter Service Indicators (4)

Hydraulic filter service indicators read the pressure difference across a filter and show when it's loading up, so the filter gets changed on condition rather than on hours alone. They screw into a port on the filter head or housing, and come as visual gauges, pop-up buttons and electrical switches that can trigger a warning light or controller. The trip point and whether you want a visual or electrical signal are what set them apart. Pick a trip point above the head's bypass setting and the indicator won't warn you until oil is already going round the filter. Fitting one takes the guesswork out of hydraulic servicing. Both choices are compared below the products.

Hydraulic Filter Service Indicators

4 products

  • Donaldson – P173944 – electrical hydraulic filter indicator, 3-wire – side view
    Vendor:
    Donaldson

    P173944 Hydraulic Filter Indicator, Electrical, 20 psid, 3-Wire, 9/16-18 UN, Duramax HMK

    Regular price $297.80 AUD
    Sale price $297.80 AUD Regular price
  • Donaldson – P174396 – electrical hydraulic filter indicator, AC/DC – side view
    Vendor:
    Donaldson

    P174396 Hydraulic Filter Indicator, Electrical, 40 psid, AC/DC, 3-Wire, Duramax HMK

    Regular price $350.90 AUD
    Sale price $350.90 AUD Regular price
  • Donaldson – P575334 – visual pop-up hydraulic filter indicator – side view
    Vendor:
    Donaldson

    P575334 Hydraulic Filter Indicator, Visual, Pop-Up, Auto Reset, 18 psid

    Regular price $67.00 AUD
    Sale price $67.00 AUD Regular price
  • Donaldson – P165965 – visual sliding-bar hydraulic filter indicator – side view
    Vendor:
    Donaldson

    P165965 Hydraulic Filter Indicator, Visual, Sliding Bar, 25 psid, Duramax HMK

    Regular price $179.70 AUD
    Sale price $179.70 AUD Regular price

How does a filter indicator work?

It measures differential pressure, the drop between the inlet and outlet of the filter, usually in psid or bar. As the element fills with dirt the drop rises until it reaches the indicator's trip point, and the indicator shows red or switches a circuit.

Choosing a service indicator

  • Trip point: choose one below the bypass valve setting of the head or filter, so you get warning before oil bypasses.
  • Visual or electrical: visual indicators suit machines that get a daily walk-around, while electrical switches feed a dash light or controller.
  • Reset type: auto-reset indicators clear when pressure drops, while manual-reset types latch until someone resets them.
  • Thread and head fit: match the indicator port thread and the head series.
  • Wiring: check the voltage, AC or DC rating and number of wires on electrical switches.

Why does the indicator trip on a cold start?

Cold oil is thicker, so the pressure drop across even a clean filter is higher until the oil warms. Check the indicator at working temperature before changing the filter. Some indicators include a thermal lockout to stop false warnings when cold.

Indicators fit the heads in hydraulic filter heads and in-tank housings and the hydraulic filter kits. Replacement cans are in spin-on hydraulic filters.

Which indicator suits my head's bypass setting?

One that signals before the bypass opens, so you change the can while all the oil is still being filtered.

  • Heads with a 25 psi (1.7 bar) bypass, such as the P766295, P166088 and P173448: the P575334 pops up at 18 psid, or the P173944 switches at 20 psid. The P165965 reads full at 25 psid, the point the bypass opens, so treat full as change now.
  • No-bypass heads such as the P166664, or heads with a 50 psi bypass: the P174396 switches at 40 psid, which gets more life out of each can. Don't fit it to a 25 psi bypass head, because it won't switch until the bypass is already open.

Will these indicators fit my FBK, SP or in-tank head?

Not that we can confirm. Donaldson lists all four for its Duramax HMK heads, which here are the P766295, P166088, P166664 and P173448. The pop-up P575334 is also listed for Donaldson's HBK, HNK and FLK heads.

Our FBK, SP and FIK heads have their own gauge and indicator ports (1/8" BSP on the FBK and FIK), and Donaldson's listings don't confirm any of these four for them. Send us the head part number and we'll match a gauge or indicator. On the Duramax heads, check where the port sits: the P766295 and P173448 have one, on the left side, while the P166088 and P166664 have ports on both sides.

Visual or electrical: which indicator should I buy?

Pick by where the warning needs to be seen. Here's how the four differ:

  • P165965: sliding bar that moves across the window as the can loads, so you can see the change coming. No wiring.
  • P575334: pop-up button that resets itself once the pressure drop falls, for example after a can change. The body is rated 0 to 70 bar.
  • P173944: electrical switch with a 3-wire connector for a dash lamp, alarm or controller. It resets automatically and screws in on a 9/16-18 UN thread with a Viton seal.
  • P174396: electrical switch with AC/DC open/closed contacts and a 3-wire connector.

Choose the trip point for your head's bypass first, then the style.