Gravity-Fed Tank Filter Kits (5)

Gravity-fed tank filter kits clean diesel from overhead and stand tanks, where the weight of the fuel does the work instead of a pump. They're common on farms, remote sites and anywhere a stand tank feeds machinery by hose. With only a few metres of head behind it, fuel reaches the filter with a fraction of the pressure a transfer pump would supply, so the filter has to be chosen for low restriction. Flow at low pressure and water handling decide the right kit. Fit a filter with too much restriction and fills slow to a trickle, operators are tempted to take it off, and dirty, wet fuel ends up in the machine. Measure the tank outlet height and size before you compare kits.

Gravity-Fed Tank Filter Kits

5 products

  • LUBESMART AF-UF-FF25-1 Fuel Filter Assembly – 1 Inch BSP Ports, 10um Filter Cartridge, Translucent Bowl and Drain
    Up to $32.90 off
    Vendor:
    A-FLO Equipment

    AF-UF-FF25-1 Fuel Filter Assembly, 1" BSP Ports, 10um Filter Element, Translucent Bowl & Drain, up to 95 lpm

    Regular price $131.00 AUD
    Sale price $131.00 AUD Regular price $163.90 AUD
  • Donaldson X900134 Bulk Fuel Tank Kit, 10um with TRAP Breather, up to 220
    Vendor:
    Donaldson

    X900134 Bulk Fuel Tank Kit, 10um with TRAP Breather, up to 220 lpm

    Regular price $475.40 AUD
    Sale price $475.40 AUD Regular price
  • Donaldson X900115 Bulk Fuel Tank Kit, 10um, up to 220 lpm
    Vendor:
    Donaldson

    X900115 Bulk Fuel Tank Kit, 10um, up to 220 lpm

    Regular price $385.20 AUD
    Sale price $385.20 AUD Regular price
  • Donaldson X900133 Bulk Fuel Tank Kit, 10um with TRAP Breather & Bracket,
    Vendor:
    Donaldson

    X900133 Bulk Fuel Tank Kit, 10um with TRAP Breather & Bracket, up to 220 lpm

    Regular price $475.00 AUD
    Sale price $475.00 AUD Regular price
  • Donaldson P902973 Bulk Fuel Tank Kit, 10um with TRAP Breather, up to 220
    Vendor:
    Donaldson

    P902973 Bulk Fuel Tank Kit, 10um with TRAP Breather, up to 220 lpm

    1 in stock
    Regular price $528.40 AUD
    Sale price $528.40 AUD Regular price

Why do gravity-fed tanks need a different filter?

Because there's very little pressure to push fuel through the media. A filter that flows freely behind a pump can barely trickle on a gravity feed. Kits for this job use larger elements or lower-restriction media, so the outlet still delivers a usable fill rate.

Dealing with water in an overhead tank

Expect it. Overhead tanks heat and cool every day, drawing in humid air through the vent, and the moisture condenses inside. Water settles at the bottom of the tank, and a low outlet will draw it straight into the line. A clear bowl with a drain lets you see and remove it, and a water-absorbing or water-separating element stops what's left. Drain the tank's sump regularly as well.

Choosing a gravity-fed filter kit

Start with the head height you have.

  • Flow rating at low inlet pressure, not just the maximum pumped figure
  • Height of the tank outlet above the dispensing point
  • Outlet and hose thread standard and size (BSP or NPT)
  • Water control: see-through bowl, drain and water-block element
  • Micron rating suited to the engines you refuel
  • A breather on the tank vent to cut the moisture coming in

Running a pump instead? See pumped bulk tank filter kits. Add a tank vent breather, keep stored diesel healthy with fuel treatments and biocides, or send us your tank height and outlet size.

What's the difference between the four Donaldson gravity tank kits?

All four filter diesel to 10 micron at 99.5% (Beta 200), are rated to 220 lpm and 10.3 bar, and target ISO 21/19/16. They differ in the element, the head ports and the breather in the box.

  • P902973: P574959 element, SAE-20 / 1" BSP head, with a P564669 T.R.A.P. breather.
  • X900133: P574959 element, SAE-20 head, with a P566151 T.R.A.P. breather and a mounting bracket.
  • X900134: P579099 element, 1-1/4" BSP head, with a P566151 T.R.A.P. breather.
  • X900115: P579099 element, 1-1/4" BSP head, no breather.

Choose on the outlet thread first. The P579099 element uses synthetic water-absorbing media, and no water stage is listed for the P574959, so on a tank prone to water the 1-1/4" BSP kits have the edge. Both breathers have a 1" NPT male thread, and Donaldson includes a 1" female BSP socket. The X900115 suits a tank that already has a breather.

Can I fit a gravity tank kit after a pump?

Donaldson specifies these kits for gravity-fed or low-pressure overhead and portable tanks, with a 10.3 bar operating pressure. For a pumped dispenser or service truck, use one of our dispenser kits: Donaldson builds them for fuel dispensers, mobile service trucks and portable tanks, rated to 24.1 bar.

For a small farm or workshop setup, the Ultraflo AF-UF-FF25-1 works on gravity feed, hand pumps, and air-operated or electric pumps up to 95 lpm. It has 1" BSP ports, a 10 bar rating and a clear bowl that shows sediment and water building up.

Will a 10 micron gravity kit protect a common-rail engine?

It takes the coarse dirt out before it reaches the engine's filters, but it won't get diesel to the ISO 14/13/11 Donaldson recommends for fuel. These kits are listed to an ISO 21/19/16 target.

Treat a gravity kit as the tank's first line of defence, with the engine's own filters doing the fine work. On machines working where fuel quality is doubtful, an on-vehicle primary filter from our diesel and HPCR engine kits adds a stage ahead of the factory filter, down to 3 micron in the Donaldson high efficiency kits.

Which replacement element does my gravity tank kit take?

P902973 and X900133 take the P574959 spin-on; X900134 and X900115 take the P579099, a 10 micron (Beta 200) element with synthetic water-absorbing media on a 1-1/4" BSP thread. The P574959 isn't listed on our site yet, so ask us for it. Check the head too: the P574959 kits use an SAE-20 head and the P579099 kits a 1-1/4" BSP head, so the elements are not interchangeable between them.

Can the Ultraflo fuel filter take out water as well?

Yes, with the AF-UF-FF25WAE water block element and seal kit. It fits the AF-UF-FF25-1 housing only, keeps the 10 micron rating and also holds back the water that collects in farm tanks. It restricts flow as it takes up water, so a marked drop in flow is the signal to change it, along with the seal kit. Its water-holding capacity isn't published, so keep a spare if water is a recurring problem.

Where water isn't the concern, the standard 10 micron element is the AF-UF-FFE-10M. It isn't listed on our site yet, so ask us for it.