Heavy Duty Transmission Fluids (11)

Heavy-duty transmission fluid for powershift, torque-converter and heavy-duty automatic transmissions in trucks, buses, earthmoving, mining and agricultural machinery. These units run high loads, high heat and long hours, and the fluid has to hold its friction characteristics to protect clutch packs, keep shifts consistent and stop torque converters overheating.

Many off-highway powershift transmissions and final drives are specified to the TO-4 standard in a straight SAE grade, while heavy-duty on-road automatics are usually specified by the transmission maker's own approval list. Order the spec and grade the OEM lists for each compartment and ambient temperature. Put engine oil or a general ATF in a powershift box and the clutches can glaze or slip. The notes below explain TO-4 grades.

Heavy Duty Transmission Fluids

11 products

  • Valvoline 1382.20 SynGard ATF E-386 Synthetic Transmission Fluid 20L
    Vendor:
    Valvoline

    1382.20 SynGard E-386 Synthetic Transmission Oil 20L

    Regular price $900.00 AUD
    Sale price $900.00 AUD Regular price
  • Valvoline 1221.20 Valtorque C4-30 Transmission Oil 20L
    Vendor:
    Valvoline

    1221.20 Valtorque C4-30 Transmission Oil 20L

    2 in stock
    Regular price $209.00 AUD
    Sale price $209.00 AUD Regular price
  • Valvoline 1221 ibc valtorque c4-30 1000l
    Vendor:
    Valvoline

    1221 IBC Valtorque C4-30 Transmission Oil 1000L

    Regular price $7,770.00 AUD
    Sale price $7,770.00 AUD Regular price
  • Valvoline 1248 IBC Valtorque C4-10W Transmission Oil 1000L
    Vendor:
    Valvoline

    1248 IBC Valtorque C4-10W Transmission Oil 1000L

    Regular price $7,700.00 AUD
    Sale price $7,700.00 AUD Regular price
  • Valvoline 1409.20 Valtorque C4-60 Transmission Oil 20L
    Vendor:
    Valvoline

    1409.20 Valtorque C4-60 Transmission Oil 20L

    Regular price $229.00 AUD
    Sale price $229.00 AUD Regular price
  • Valvoline 1382.51 SynGard E-386 Synthetic Transmission Fluid 205L
    Vendor:
    Valvoline

    1382.51 SynGard E-386 Synthetic Transmission Fluid 205L

    Regular price $6,000.00 AUD
    Sale price $6,000.00 AUD Regular price
  • Valvoline 1248.51 Valtorque C4-10W Transmission Oil 205L
    Vendor:
    Valvoline

    1248.51 Valtorque C4-10W Transmission Oil 205L

    Regular price $1,700.00 AUD
    Sale price $1,700.00 AUD Regular price
  • Valvoline 1248.20 Valtorque C4-10W Transmission Oil 20L
    Vendor:
    Valvoline

    1248.20 Valtorque C4-10W Transmission Oil 20L

    2 in stock
    Regular price $209.00 AUD
    Sale price $209.00 AUD Regular price
  • Valvoline 1221.51 Valtorque C4-30 Transmission Oil 205L
    Vendor:
    Valvoline

    1221.51 Valtorque C4-30 Transmission Oil 205L

    Regular price $1,600.00 AUD
    Sale price $1,600.00 AUD Regular price
  • Valvoline 1218.51 Valtorque C4-50 Transmission Oil 205L
    Vendor:
    Valvoline

    1218.51 Valtorque C4-50 Transmission Oil 205L

    Regular price $1,600.00 AUD
    Sale price $1,600.00 AUD Regular price
  • Valvoline 1218.20 Valtorque C4-50 Transmission Oil 20L
    Vendor:
    Valvoline

    1218.20 Valtorque C4-50 Transmission Oil 20L

    Regular price $209.00 AUD
    Sale price $209.00 AUD Regular price

What is a TO-4 fluid?

TO-4 is a heavy-duty spec for powershift transmissions, final drives and wet brakes. It started as one equipment maker's spec and is now used widely across off-highway machinery, setting friction, wear and seal tests that suit clutch packs under load. TO-4 fluids come in straight grades, and the maker's chart sets which grade goes in each compartment for the temperature range. Some machines run different grades in the transmission and final drives.

Can you use engine oil in a powershift transmission?

Not unless the manual allows it. Modern engine oils are formulated for engines, and some carry friction modifiers that let wet clutches slip. Use the transmission spec in the manual, even if the machine once ran engine oil in that compartment.

Choosing a heavy-duty transmission fluid

  • Spec: TO-4 for many off-highway powershift units, or the transmission maker's approval for on-road automatics.
  • Grade for each compartment and your ambient temperature range.
  • Synthetic or mineral: synthetics suit extended drains where the OEM approves them.
  • Contamination control: filtered transfer and good breathers protect clutch packs.
  • Pack size for single machines, workshops or fleet depots.

Fit a fresh transmission filter at each fluid change, run bulk fluid through oil hose reels, and fit desiccant breathers on bulk tanks. For a machine-specific grade, get in touch.

Which Valtorque grade do I need?

The SAE grade the machine's manual lists for that compartment. The transmission and the final drives on the same machine often call for different grades.

  • C4-10W: powershift transmissions, torque converters, wet brakes and hydraulics where 10W is specified, and for cold-start flow.
  • C4-30: powershift transmissions, torque converters, wet brakes and final drives where SAE 30 is specified.
  • C4-50: hot, heavily loaded final drives and powershift drivetrains specifying SAE 50.
  • C4-60: Valvoline's final drive grade for Caterpillar and Komatsu final drives specifying TO-4 SAE 60.

All four are SAE monogrades meeting Caterpillar TO-4 and TO-2 and API GL-4.

Does Valtorque suit Komatsu, Dana and Eaton equipment as well as Caterpillar?

Yes, where the equipment specifies Caterpillar TO-4 or Allison C-4. Valvoline states the Valtorque C4 range meets the performance requirements of Komatsu equipment, Caterpillar powershifts including Dana powershifts where TO-4 is specified, and Eaton Fuller equipment.

Named approvals vary by grade:

  • Komatsu KES 07.868.1: C4-10W and C4-30.
  • ZF: C4-10W (TE-ML 03C) and C4-30 (TE-ML 03C and 07F).
  • Allison TES-439: C4-30.

If your manual lists a specific approval number, check it against the grade before you order.

Can Valtorque go in the hydraulics and wet brakes too?

Yes, where the machine specifies a fluid meeting Caterpillar TO-4 or Allison C-4 for those systems. Valvoline lists Valtorque C4 for transmissions, final drives and hydraulic systems requiring TO-4 or C-4. Its friction additive system is there to stop clutch slippage and keep transmission and brake operation quiet.

Use the grade the manual lists for each compartment. Where the manual calls for a hydraulic oil (an ISO grade) instead, use Ultramax.

Which fluid goes in an Eaton Fuller manual truck gearbox?

SynGard E-386, where Eaton PS-386 or PS-164 Rev 7 is specified. It is Eaton-approved for PS-386, which supersedes PS-164 Rev 7, and covers Fuller Advantage, UltraShift PLUS, FR and RT series transmissions.

It also holds Mack TO-A Plus and Meritor 0-81 approvals and meets API MT-1, Navistar MPAPS B-6816 Type II, Volvo 97305 and ZF TE-ML 02L.

Valvoline states it supports drain intervals up to 400,000 km in Eaton transmissions with an oil analysis program. Without oil analysis, use the interval in the truck's schedule. It comes in 20L and 205L.

Can I use SynGard E-386 in the diffs as well?

No. SynGard E-386 is a manual transmission fluid rated API MT-1. It doesn't carry the API GL-5 rating that truck drive axles call for.

For the axles, use a GL-5 gear oil in the grade the axle maker lists. If you want one oil across the gearbox and the axles, HD TDL Pro 75W-90 carries GL-4, GL-5 and MT-1 with ZF, MAN, Scania and Volvo approvals. Check that your gearbox maker lists it before swapping away from E-386.