Metal Air Cleaner Housings (0)

Metal air cleaner housings suit engines that work where heat, knocks and heavy dust would crack a plastic body, such as mining, quarrying, earthmoving, construction and forestry machines. Many designs build a pre-cleaning stage into the housing, spinning out coarse dust and dropping it through a vacuator valve before the air reaches the element. Airflow is the first check: the engine's rated airflow should sit comfortably inside the housing's rating. After that, decide on dust duty, an integrated pre-cleaner and whether you want a safety element. An undersized housing runs high restriction and goes through elements fast, which costs more over a machine's life than the housing ever saved. Sizing notes are further down.

Metal Air Cleaner Housings

No products found.

Use fewer filters or clear filters.


When is a metal housing worth it?

When the housing itself is at risk. Rock strikes, vibration, engine bay heat and pressure washing all shorten the life of a plastic body on hard-working machines. A cracked housing lets dust bypass the element entirely, which is the main reason to go metal.

How do I size one?

Start from the engine maker's maximum airflow and choose a housing whose rated range includes it with some margin. Some housings carry a lower rating with a safety element fitted, so compare like with like. Check inlet and outlet sizes and mounting after airflow, not before.

Medium dust or heavy dust?

Match the housing to the worst conditions the machine sees, not the average. Heavy-duty designs with built-in pre-cleaning hold up far better on haul roads, around crushers and in dry cultivation. If the machine moves between light and heavy work, size for the heavy end and add a restriction indicator so element changes follow actual loading rather than the calendar.

  • Engine airflow against the housing rating
  • Dust duty rating
  • Integrated pre-cleaner and vacuator valve
  • Primary-only or primary and safety element
  • Inlet, outlet and mounting layout

Need something lighter? Compare OptiAir air cleaners or all air cleaner housings. Secure it with mounting bands, or talk to us about sizing.

Which metal housing do I need?

Pick by airflow first, then the dust rating and element layout:

  • AH19107: medium dust, primary cartridge only, no integrated pre-cleaner, 0.88–2.15 m³/min, 215.9 mm long.
  • AH19108: medium dust, integrated pre-cleaner, primary only, 1.25–3.2 m³/min, 326.39 mm long.
  • AH19066: heavy or medium dust, integrated pre-cleaner, primary and secondary, 2.97–7.93 m³/min, 458.47 mm long.
  • AH19269: heavy or medium dust, integrated pre-cleaner, primary only, 4.25–10.84 m³/min, 502.92 mm long.

Housings are installation-specific, so check inlet and outlet orientation, mounting and clearance against the unit coming off.

What does the heavy dust rating mean on a metal housing?

It means the integrated pre-cleaner and dust ejection are sized to shed a large, continuous dust load rather than an occasional one: quarrying, harvesting or unsealed haul roads. Fleetguard rates the AH19066 and AH19269 for heavy or medium dust; the AH19107 and AH19108 for medium dust only.

Watch the bottom of the flow range. The pre-cleaning stage spins slower at low airflow and separates less, so don't choose a housing whose range only just reaches down to your engine.

Is a primary-only metal housing safe in heavy dust?

It works, but the primary is then the only filtration in the system, so element handling matters: clean out the housing before the new cartridge goes in, and never leave it open on site. If you want a safety element covering element changes, the AH19066 is the metal housing with both.

Which cartridge does each metal housing take?

We don't list the cartridge numbers for these four housings online. Send us the housing number, or the machine make, model and serial, and we'll confirm the primary cartridge (and the safety cartridge for the AH19066) against Fleetguard data before you order.