Brake Parts Cleaner & Degreaser (4)

Brake parts cleaner and degreaser strip brake dust, grease, oil and road grime from components so they can be inspected, repaired and put back together clean. Brake cleaner is a residue-free solvent for pads, rotors, drums, calipers and machined parts, while degreasers tackle heavier build-up on engines, chassis, parts and workshop floors. Mechanics, fleet workshops and plant maintenance crews go through both every day.

The surface you're cleaning and how you'll apply the product decide the choice: aerosol at the job, or bulk for the bench and parts washer. Oil left on a friction surface costs braking performance, and the wrong solvent can soften rubber, plastic or paint. Details on solvent types and safe use follow below.

Brake Parts Cleaner & Degreaser

4 products

  • Valvoline 7260 VPS Brake Parts Cleaner 350g
    Vendor:
    Valvoline

    7260 VPS Brake Parts Cleaner 350g

    3 in stock
    Regular price $11.95 AUD
    Sale price $11.95 AUD Regular price
  • Valvoline 7255.51 VPS Super Degreaser 205L
    Vendor:
    Valvoline

    7255.51 VPS Super Degreaser 205L

    Regular price $1,500.00 AUD
    Sale price $1,500.00 AUD Regular price
  • Valvoline 7255.20 VPS Super Degreaser 20L
    Vendor:
    Valvoline

    7255.20 VPS Super Degreaser 20L

    2 in stock
    Regular price $209.00 AUD
    Sale price $209.00 AUD Regular price
  • Valvoline 7251.20 VPS Brake Parts Cleaner 20L
    Vendor:
    Valvoline

    7251.20 VPS Brake Parts Cleaner 20L

    2 in stock
    Regular price $189.00 AUD
    Sale price $189.00 AUD Regular price

Chlorinated or non-chlorinated brake cleaner?

Non-chlorinated cleaners are flammable, while chlorinated cleaners don't burn but carry other hazards. Chlorinated solvents can break down into toxic gases, including phosgene, when heated, so never use them near welding, grinding or hot surfaces. Non-chlorinated products need to be kept away from sparks and ignition sources. Either way, work with good ventilation and read the SDS.

Is brake cleaner safe on rubber and plastic?

Not always. Strong solvents can swell or crack seals, dust boots, plastic connectors, wiring insulation and paint. Test on a hidden spot first, and keep overspray off parts that aren't meant to be cleaned.

Solvent or water-based degreaser?

Solvent degreasers work fast on heavy grease and evaporate; water-based degreasers are diluted, applied and rinsed off. Water-based products suit wash bays, floors and large areas, and the dilution rate on the label sets both cleaning strength and cost per job. Rinse water needs to go to a system built for it, such as an interceptor, never a stormwater drain.

  • Surface: friction, machined, painted, rubber or plastic.
  • Residue: brake and assembly work needs a cleaner that leaves none.
  • Flammability and ventilation for where you'll use it.
  • Format: aerosol, bulk for decanting, or concentrate for dilution.

Finish the brake job with fresh brake fluids, wear chemical-resistant gloves when handling solvents, and see vehicle cleaning and appearance for whole-vehicle washdown. Questions on a product? Contact us.

Do I need brake parts cleaner or a degreaser?

Brake parts cleaner for anything that has to be clean and residue-free before assembly. A degreaser for heavy grime you can rinse off with water.

  • VPS Brake Parts Cleaner: removes brake fluid, oil, grease and brake dust, contains no petroleum and leaves no residue. Use it on brake and clutch parts and on components going back together.
  • VPS Super Degreaser: a selective solvent with a biodegradable emulsifier. It dissolves heavy oil and grease, then the emulsified grime rinses away with water. Use it on engines, machinery and workshop floors.

Why does some brake cleaner leave an oily film, and how do I avoid it?

Cleaners that evaporate almost instantly can flash off before they carry the dissolved oil away, leaving oil, brake fluid and grease behind on the part. VPS Brake Parts Cleaner controls its evaporation rate so dissolved contaminants are carried off rather than redeposited, and it contains no petroleum.

To use it:

  • Hold the can upright, 10–15cm from the part, and spray.
  • Let any excess evaporate, then wipe off with a clean cloth.
  • Work in a well-ventilated area.

Can I buy brake cleaner in bulk for the workshop?

Yes. VPS Brake Parts Cleaner 20L is the same cleaner as the 350g aerosol, covered by the same Valvoline data sheet. Decant it into trigger sprayers, a parts washer or a dispensing station, which brings the cost per job down across a week of brake and clutch work. Keep it sealed and away from ignition sources, and off painted surfaces.

Should I use Super Degreaser neat or diluted, and when is the 205L drum worth it?

Match the strength to the mess. Run VPS Super Degreaser neat or strong on baked-on engine grease and heavily fouled machinery, and dilute it well down for floors, panels and routine washdown. Give it a short dwell, then rinse thoroughly before it dries so the emulsified grime is carried away rather than settling back.

The 205L drum is built for plumbing into wash bays and bulk dispensing systems. Test on an out-of-sight spot where a finish might be sensitive, and wear gloves.