Coolant Filters (24)

Coolant filters remove scale, rust and debris from the cooling system on heavy-duty diesel engines, and many also release supplemental coolant additive (SCA) to keep the coolant chemistry in balance. Charged filters dose SCA as they work, while blank filters carry no chemical and only filter, for engines on a fully formulated coolant. Charged or blank is the first decision, then the dose size. Too little additive leaves wet cylinder liners open to cavitation pitting and corrosion. Too much, from a charged filter on top of a coolant that already carries it, can drop solids into the radiator and water pump. Dosing and testing are set out in the guide below.

Coolant Filters

24 products

  • Fleetguard WF2077 Coolant Filter – Standard Service, 0 Chemical
    Vendor:
    Fleetguard

    WF2077 Coolant Filter- Standard Service, 0 Chemical

    3 in stock
    Regular price $27.80 AUD
    Sale price $27.80 AUD Regular price
  • Donaldson – DBC4088 – Donaldson Blue coolant filter, additive replenishment, 136 mm – side view
    Vendor:
    Donaldson

    DBC4088 Coolant Filter, Donaldson Blue, Additive Replenishment

    Regular price $174.00 AUD
    Sale price $174.00 AUD Regular price
  • Donaldson – DBC4085 – Donaldson Blue non-chemical coolant filter, 135 mm – side view
    Vendor:
    Donaldson

    DBC4085 Coolant Filter, Donaldson Blue No Additive, Extended Service

    Regular price $76.20 AUD
    Sale price $76.20 AUD Regular price
  • Donaldson – P554685 – non-chemical coolant filter, 136 mm – side view
    Vendor:
    Donaldson

    P554685 Coolant Filter, Spin-On No Additive, Standard Service

    Regular price $30.40 AUD
    Sale price $30.40 AUD Regular price
  • Donaldson – P554075 – SCA coolant filter, 15 units, 136 mm – side view
    Vendor:
    Donaldson

    P554075 Coolant Filter, Spin-On SCA 15 Units

    Regular price $61.10 AUD
    Sale price $61.10 AUD Regular price
  • Donaldson – P554074 – SCA coolant filter, 12 units, 136 mm – side view
    Vendor:
    Donaldson

    P554074 Coolant Filter, Spin-On SCA 12 Units

    Regular price $55.20 AUD
    Sale price $55.20 AUD Regular price
  • Donaldson – P554073 – SCA coolant filter, 8 units, 136 mm – side view
    Vendor:
    Donaldson

    P554073 Coolant Filter, Spin-On SCA 8 Units

    Regular price $37.80 AUD
    Sale price $37.80 AUD Regular price
  • Donaldson – P552076 – SCA+ coolant filter, 23 units, 200 mm – side view
    Vendor:
    Donaldson

    P552076 Coolant Filter, Spin-On SCA+ 23 Units

    Regular price $72.50 AUD
    Sale price $72.50 AUD Regular price
  • Donaldson – P552075 – SCA+ coolant filter, 15 units, 136 mm – side view
    Vendor:
    Donaldson

    P552075 Coolant Filter, Spin-On SCA+ 15 Units

    Regular price $47.60 AUD
    Sale price $47.60 AUD Regular price
  • Donaldson – P552074 – SCA+ coolant filter, 12 units, 136 mm – side view
    Vendor:
    Donaldson

    P552074 Coolant Filter, Spin-On SCA+ 12 Units

    Regular price $41.60 AUD
    Sale price $41.60 AUD Regular price
  • Donaldson – P552073 – SCA+ coolant filter, 8 units, 136 mm – side view
    Vendor:
    Donaldson

    P552073 Coolant Filter, Spin-On SCA+ 8 Units

    Regular price $38.20 AUD
    Sale price $38.20 AUD Regular price
  • Donaldson – P552072 – SCA+ coolant filter, 6 units, 107 mm – side view
    Vendor:
    Donaldson

    P552072 Coolant Filter, Spin-On SCA+ 6 Units

    Regular price $39.60 AUD
    Sale price $39.60 AUD Regular price
  • Donaldson – P552071 – SCA+ coolant filter, 4 units, 107 mm – side view
    Vendor:
    Donaldson

    P552071 Coolant Filter, Spin-On SCA+ 4 Units

    Regular price $28.00 AUD
    Sale price $28.00 AUD Regular price
  • Donaldson – P552070 – SCA+ coolant filter, 2 units, 107 mm – side view
    Vendor:
    Donaldson

    P552070 Coolant Filter, Spin-On SCA+ 2 Units

    Regular price $44.00 AUD
    Sale price $44.00 AUD Regular price
  • Fleetguard WF2109 Coolant Filter – Spin-on
    Vendor:
    Fleetguard

    WF2109 Coolant Filter- Spin-on

    Regular price $18.50 AUD
    Sale price $18.50 AUD Regular price

Do I need a charged or blank coolant filter?

It depends on your coolant. Conventional coolants usually need SCA topped up, and a charged filter is the easy way to do it. Many extended-life and OAT coolants are fully formulated and call for a blank filter instead. Check the coolant maker's advice before choosing.

Choosing a coolant filter

  • Charged or blank: suit the filter to your coolant program.
  • Dose size: use the dose your engine maker specifies for the system's capacity.
  • Standard or extended service: match the filter to your change interval.
  • Thread: check the head thread, which can be imperial or metric.
  • Format: most are spin-ons, but some engines use an element or bail-handle unit.
  • Shut-off valves: some heads have valves so the filter can be changed without draining the system. Close them first.

How do I check SCA levels?

Coolant test strips give a quick reading of additive concentration. Test at each service and only fit a charged filter when the level calls for it, otherwise use a blank. Keep the strips sealed, because damp strips give false readings. Record the results so trends show up before they become a liner or water pump problem.

For the coolant itself, see coolant, and pair the filter change with oil filters at the same service. Ask us if you're unsure which program your fleet runs.

Which coolant filter do I need: charged (SCA) or non-chemical?

The one that suits the coolant in the engine. The filter follows the coolant program, not the other way round.

  • Conventional coolant on an SCA program: fit a charged filter that tops up the additive as it depletes: Fleetguard DCA4 (WF2073, WF2074, WF2075, WF2076) or DCA2 (WF2144), or Donaldson SCA+ and SCA filters such as the P552073 and P554073. Dosing liquid SCA instead? Pair it with a non-chemical filter: Donaldson rates the two set-ups as giving the same protection when the system is properly pre-charged and maintained.
  • Fully formulated or extended-life coolant: it carries its own additive package, so fit a non-chemical filter such as the WF2077, WF2142, Baldwin B5134 or Donaldson P554685. A charged filter on this coolant overconcentrates the system, which can drop additive out of solution as gel or deposits. Donaldson also lists a non-chemical filter for a system that has been over-charged, while the additive level comes back down.
  • Organic acid (OAT) coolant: Fleetguard pair their ES Compleat OAT with chemical-free filters.

Donaldson says non-chemical filters aren't for water-only systems. Not sure what's in the machine? Check the coolant's data sheet, or see our coolant range, before you pick the filter.

Which charged filter matches my coolant: DCA4, DCA2, SCA+ or SCA?

Match the chemistry already in the system. The families pair up, and they aren't interchangeable even though the filters look alike and share a thread:

  • DCA4 or Donaldson SCA+: nitrite and molybdate against liner pitting, with a phosphate buffer. Donaldson rates SCA+ as a substitute for DCA4 and BTA Plus. Ours: Fleetguard WF2073, WF2074, WF2076 and the 15 unit pellet-form WF2075, and Donaldson P552070 to P552076.
  • DCA2 or Donaldson SCA: nitrite with a borate buffer. Donaldson rates SCA as a substitute for DCA2 and BTE. Ours: Fleetguard WF2144, listed for Komatsu standard service, and Donaldson P554073, P554074 and P554075.

Fleetguard pair DCA4 with ES Compleat EG and PG coolants, and DCA2 with Fleetcool and Fleetcool EX. Check the part number on the filter you're removing, or the coolant maker's data sheet, before you switch.

How many units of additive should my charged coolant filter carry?

Enough for your cooling system's volume over the service interval. At a 625-hour (40,225 km) interval, Donaldson's service guide uses:

  • Up to 19 L: 2 units.
  • 22.7 to 37.8 L: 4 units.
  • 41.6 to 46.7 L: 8 units.
  • 60.6 to 75.7 L: 12 units.

Shorter intervals take fewer units. The guide stops at 75.7 L, so a bigger system takes the count the engine maker sets. We stock DCA4 in 8, 12, 15 and 23 units (WF2073, WF2074, WF2075, WF2076), Donaldson SCA+ in 2, 4, 6, 8, 12, 15 and 23 units, and SCA in 8, 12 and 15. A machine with a larger radiator or an added cooler may need a different count from the engine's original.

Too many units overconcentrates the additive, and Donaldson warns the excess forms abrasive solids that drop out, clog passages, cut heat transfer and quickly plug the coolant filter; too few lets nitrite fall below the level that protects the liners. Test the coolant before you change the filter, not after.

What's the difference between standard and extended service coolant filters?

Extended service filters are built for longer service intervals. Most of ours are non-chemical, for systems running fully formulated or long-life coolant: the WF2122, B5087, B5090, B5144 and Donaldson Blue DBC4085. The exception is the Donaldson Blue DBC4088, which releases small amounts of time-release additive between services for systems on an SCA program. Standard service filters suit conventional intervals.

Don't confuse the two terms Donaldson separates: extended drain means longer between complete coolant drains, but the additive still needs servicing on the normal schedule; extended service means the additive itself lasts longer between services. Fit a non-chemical extended service filter only where the coolant matches. On conventional coolant with an SCA program nothing replenishes the additive between changes, and liner pitting found during an unrelated repair is often the first sign.

Can I swap my Fleetguard coolant filter for a Donaldson one?

Often, where the chemistry and unit count match and it fits the space. Donaldson cross-references its SCA+ P552073, P552074 and P552075 to the WF2073, WF2074 and WF2075, and the non-chemical P554685 carries the same OEM numbers as the WF2077. All of them spin onto an 11/16-16 UN thread.

Two checks before you switch:

  • Length: the P552073 is 136 mm long against 105.7 mm for the WF2073, so make sure the longer can clears.
  • Chemistry, not just the OEM number: Cummins 3315115 is listed against both the SCA P554073 and the SCA+ P552073, and Cummins 3318318 against both the SCA P554075 and the SCA+ P552075. Pick the one that matches the program your coolant runs.

Why fit a coolant filter if the coolant is long-life?

Because a coolant filter does mechanical work as well as chemical. It removes casting sand, scale, rust and other debris that settle in the low-flow areas of the radiator and oil cooler and cut heat transfer. A non-chemical filter does only that part of the job, which is exactly what a long-life coolant needs. Fleetguard put cooling system failures behind more than 40% of engine repair costs.

Will a charged filter or SCA fix corrosion that's already in the system?

No. Donaldson's guidance is that additive protects a clean system but won't cure existing corrosion. If the system is in poor condition, clean and flush it first with PrixMax Radiator Flush, refill, then fit the charged filter. From there the additive keeps the system clean as long as the service intervals are kept.