Portable Fuel & Oil Filter Carts (2)

Portable fuel and oil filter carts pump fluid through a filter as you move it, so you can clean oil going into a machine, transfer diesel between tanks, or polish fluid that's already sitting in storage. Workshops, mine sites, farms and hydraulic service crews use them where a fixed system won't reach. Power supply and fluid narrow the choice quickly: 12V units run from a vehicle battery in the field, 240V units suit the workshop, and fuel and oil carts aren't interchangeable. After that it's a trade between fine filtration and transfer speed. Pick a cart that can't run where the job is, or one too coarse for the system you're filling, and contamination goes in with the oil. Compare power, fluid and flow before you choose.

Portable Fuel & Oil Filter Carts

2 products

  • Donaldson X011408 Bu.F.S.S Bulk Fuel Service System – 12V, 57 Lpm
    Vendor:
    Donaldson

    X011408 Bu.F.S.S Bulk Fuel Service System, 12V, 57 lpm

    Regular price $9,730.80 AUD
    Sale price $9,730.80 AUD Regular price
  • Donaldson P506037 B.O.S.S Bulk Oil Service System – 25 micron, 240V, 40 Lpm
    Vendor:
    Donaldson

    P506037 B.O.S.S Bulk Oil Service System, 25 Mic, 240V, 40 lpm

    Regular price $13,576.10 AUD
    Sale price $13,576.10 AUD Regular price

What is off-line filtration?

It's cleaning fluid outside the machine's normal circuit. A cart draws oil from a reservoir or tank, passes it through a fine filter and returns it, often over several passes, to bring cleanliness down without draining and replacing the oil. The same cart can pre-filter new oil on the way in, which matters because new oil isn't always clean enough for modern hydraulics.

Fine polishing or fast transfer?

Fine filtration takes more time. A finer element at a lower flow rate removes more dirt per pass, which suits hydraulic and transmission systems. A coarser, faster cart suits topping up engines and moving oil between containers. If cleanliness is the goal, run more passes rather than a faster pump.

Choosing a filter cart

Pick by fluid and power first.

  • Fluid: diesel or oil, and the viscosity range the pump can handle
  • Power: 12V DC for the field or 240V AC for the workshop
  • Micron rating and filter efficiency
  • Flow rate against the volume you need to move
  • Hose length and fittings to suit your tanks and machines
  • One cart per fluid type to avoid cross-contamination

For fixed systems, see high pressure lube filters and bulk tank filter kits, find system filters in hydraulic filters, or talk to us about off-line filtration.

Which filter cart do I need?

Pick by fluid, then by power and volume.

  • Diesel: X011408 Bu.F.S.S 12V. 57 lpm vane pump, 12V at 35 A maximum, 34 kg. DBB8666 4 micron fuel filter plus DBB0248 water-absorbing filter, rated to ISO 14/13/11 or better.
  • Oil, larger volumes: P506037 B.O.S.S. 40 lpm gear pump, 240V, 65 kg on wheels. 25 micron DBB8664 elements for hydraulic, gear, transmission and engine oils, rated to ISO 18/16/13 or better.
  • Oil, small reservoirs and tight access: P506081 B.O.S.S Lite. 6 lpm gear pump, 240V, 14 kg, carried by one person. 14 micron P565183 Bulk hP element as standard.

The fuel cart is for diesel only and the oil carts are for oil only. Pick the one that matches the fluid.

Do I need a filter cart if my tank already has a dispenser kit?

Only if you need to clean fluid that's already in a tank or machine, or filter it somewhere a fixed dispenser can't reach. A dispenser kit cleans fuel as it leaves one tank. A cart is portable off-line, or kidney-loop, filtration: it draws fluid from a tank or reservoir, passes it through its own filters and returns it, supplementing the existing filtration rather than replacing it.

Typical jobs are cleaning up a small bulk tank, filtering fuel or oil as it's transferred between tanks, drums and machines, and bringing a reservoir back to its ISO target. For diesel, the Bu.F.S.S delivers ISO 14/13/11 in a single pass while it transfers.

Can I change the elements in a cart for a different oil or cleanliness target?

Yes, within each cart's listed options.

  • B.O.S.S Lite P506081: swap the standard 14 micron P565183 for the 8 micron P565185 (ISO 16/14/11, hydraulic and transmission oil) or the 4 micron P565184 (ISO 14/13/11).
  • B.O.S.S P506037: the standard element is DBB8664. The options are DBB8665 for hydraulic and transmission oil and the DBB0248 water-absorbing filter for free and emulsified water.
  • Bu.F.S.S 12V X011408: runs DBB8666 with DBB0248. Donaldson lists DBB8777, DBB7733 and DBB5333 as optional fuel elements.

Choose by the ISO code the equipment maker specifies, not the finest element available.