Air & Water Hose Reels (4)

Air and water hose reels keep compressed air and wash-down lines tidy, off the floor and ready at the bench, hoist or wash bay. Most are spring rewind, in open steel or enclosed plastic housings, and many suit both air and water. Workshops, farm sheds, truck washes and factories all use them. Hose bore is the main choice, because it decides how much air reaches the tool at the end of the line, followed by hose length and the reel's pressure rating. An undersized or overlong hose starves impact wrenches and blow guns, and a hose left on the floor gets run over, kinked and tripped on. Reels come bare or with hose fitted. See the guide below the products.

A-FLO AF-AM-8612 Plastic Enclosed Air/Water Hose Reel – 15m x 1/2 Inch Hose

4 products

  • Graco HEL010 LDX Series Air/Water/Antifreeze Hose Reel, 3/8" x 15 m Hose – left-front view
    Vendor:
    Graco

    HEL010 LDX Series Air/Water/Antifreeze Hose Reel, 3/8" x 15 m Hose

    Regular price $688.40 AUD
    Sale price $688.40 AUD Regular price
  • Graco 24P318 XD 40 bare hose reel in yellow with 90 degree inlet elbow
    Vendor:
    Graco

    24P318 XD 40 Series Bare Air/Water/Diesel Hose Reel, C Spring

    Regular price $3,330.80 AUD
    Sale price $3,330.80 AUD Regular price
  • A-FLO AF-AM-8612 Plastic Enclosed Air/Water Hose Reel – 15m x 1/2 Inch Hose
    Vendor:
    A-FLO Equipment

    AF-AM-8612 Plastic Enclosed Air/Water Hose Reel, 15m x 1/2" Hose

    Regular price $548.90 AUD
    Sale price $548.90 AUD Regular price
  • A-FLO AF-AM-8610 Plastic Enclosed Air/Water Hose Reel – 15m x 3/8 Inch Hose
    Vendor:
    A-FLO Equipment

    AF-AM-8610 Plastic Enclosed Air/Water Hose Reel, 15m x 3/8" Hose

    Regular price $548.90 AUD
    Sale price $548.90 AUD Regular price

What size air hose do I need?

Match the hose bore to your tools and the distance from the compressor. Smaller bores are fine for blow guns, tyre inflators and light tools on a short run. Larger bores carry more air with less pressure drop, which matters for impact wrenches, air grinders and longer reels.

Open or enclosed hose reel?

Open steel reels are easy to service and suit heavier hose. Enclosed reels protect the hose and spring from dust, overspray and knocks, and look tidier in a customer-facing workshop.

  • Hose bore and length for your tools and layout.
  • Working pressure, above your compressor or water supply pressure.
  • Fluid: air only, water only, or both.
  • Hot water: check the hose and seals are rated for the temperature if used for hot wash-down.
  • Mounting: wall, ceiling or swivel bracket.
  • Bare reel, or reel with hose and fittings.

Looking after your reel

Use the latch and let the hose rewind under control rather than letting it fly back. Drain water from air lines regularly, as moisture damages air tools. Replace a hose that's cracked, kinked or bulging rather than taping it.

For oil or diesel lines, see oil hose reels or diesel hose reels. Browse every reel at hose reels for all fluids.

Which air and water reel: 3/8", 1/2" or a bare reel for 1" hose?

Take 3/8" for blow guns, most air tools and general washdown; 1/2" where washdown or air tools need more flow; a bare Graco XD 40 when you're running a 3/4" or 1" line on a truck or in a big bay.

  • 3/8", hose fitted: the enclosed AF-AM-8610 (15 m, 9.5 mm ID) or the Graco HEL010 LDX (15 m), which is also rated for antifreeze and windscreen washer fluid.
  • 1/2", hose fitted: the enclosed AF-AM-8612, 15 m of 12.7 mm ID hose for stronger flow.
  • Bare, 3/4" or 1": the Graco 24P315 (D spring) or 24P318 (C spring), which take your own hose.

The enclosed casing on the AF-AM reels shields the hose and spring from dust and knocks; the HEL010 has an open all-metal frame and a ball-bearing swivel.

What else do I need to fit an air or water reel?

A fitting at the inlet and a gun or coupler at the hose end on every reel, plus Graco's inlet kit and, on the bare reels, the hose itself.

  • AF-AM-8610 and AF-AM-8612: come with a mounting bracket and inlet hose. Add the fitting to suit your air or water line, and a blow gun or nozzle.
  • Graco HEL010: hose fitted, but the blow gun, coupler and the required 25U369 hose inlet kit are separate. The optional 24N444 swivel bracket is an alternative to bolting the pedestal down.
  • Graco 24P315 and 24P318: shipped bare with a 90° inlet elbow. Order the hose, a ball stop kit and the 24R111 inlet hose kit for air and water; Graco's 1" × 15 m air and water hose is 126362. Overhead mounting uses the 237932 kit with the 24R076 support arm.

The Graco parts aren't listed on our site; ask us for them with the reel.

Can I run an air or water reel at full compressor pressure?

Only if every part of the line is rated for it, and on these reels the hose or the reel often sets a lower limit than the compressor.

  • Graco HEL010: rated to 20.7 bar.
  • Graco 24P315 and 24P318: the reels are rated to 41 bar, but Graco's 126362 air and water hose is rated to 20.6 bar, so a line built with it works to 20.6 bar.
  • AF-AM-8610 and AF-AM-8612: the maximum working pressure isn't published on our listings, and we won't guess it. Send us the pressure your line runs at and we'll confirm it against the maker's rating before you connect.

Check the rating of the blow gun or coupler on the hose end too.

24P315 or 24P318: which Graco XD 40 reel?

The 24P315 for a dedicated 1" air or water line; the 24P318 for a longer 3/4" air or water hose, or if the reel may later carry diesel or waste oil evacuation.

  • 24P315 (D spring): air and water only, takes 1" × 15 m of hose. The D spring is the one Graco fits to its XD 40 air and water assemblies.
  • 24P318 (C spring): takes 3/4" × 30 m for air or water, 1" × 23 m for waste oil evacuation or 1" × 15 m for diesel, with the inlet kit for that fluid (24R111, 24R112 or 24R115). Graco rates the diesel and evacuation inlet kits at 17 bar, and diesel must contain less than 20% biofuel.

Both are rated to 41 bar and mount on the floor or a truck bed, and neither is for petrol.