Sy-Klone Pre-Cleaners (7)

Fleetguard AP series pre-cleaners use centrifugal separation to throw dust, dirt, rain and snow out of the intake air before it reaches the air filter, ejecting it continuously while the engine runs. They're common on mining, construction, forestry and agricultural machines, and many models mount horizontally or vertically, which helps where the intake comes out the side of a bonnet. Size on airflow first, then outlet diameter, since the same outlet size can come in models rated for different engine airflows. An undersized unit restricts the engine, and an oversized one can fall below the air speed it needs to separate dust properly, leaving the filter to carry the full load. Sizing tips are below.

Fleetguard AP8406 Pre-cleaner- 8 Inch Outlet – Horizontal or Vertical Mount, 1300-1800 cfm

7 products

  • Fleetguard AP8408 Pre-cleaner- 3 Inch Outlet – Horizontal or Vertical Mount, 50-120 cfm
    Vendor:
    Fleetguard

    AP8408 Pre-cleaner- 3" outlet, Horizontal or Vertical mount, 50-120 cfm

    Regular price $443.10 AUD
    Sale price $443.10 AUD Regular price
  • Fleetguard AP8409 Pre-cleaner- 4 Inch Outlet – Horizontal or Vertical Mount, 350-450 cfm
    Vendor:
    Fleetguard

    AP8409 Pre-cleaner- 4" outlet, Horizontal or Vertical mount, 350-450 cfm

    Regular price $457.30 AUD
    Sale price $457.30 AUD Regular price
  • Fleetguard AP8407 Pre-cleaner- 2 Inch Outlet – Horizontal or Vertical Mount, 10-50 cfm
    Vendor:
    Fleetguard

    AP8407 Pre-cleaner- 2" outlet, Horizontal or Vertical mount, 10-50 cfm

    Regular price $265.10 AUD
    Sale price $265.10 AUD Regular price
  • Fleetguard AP8406 Pre-cleaner- 8 Inch Outlet – Horizontal or Vertical Mount, 1300-1800 cfm
    Vendor:
    Fleetguard

    AP8406 Pre-cleaner- 8" outlet, Horizontal or Vertical mount, 1300-1800 cfm

    Regular price $1,153.10 AUD
    Sale price $1,153.10 AUD Regular price
  • Fleetguard AP8405 Pre-cleaner- 8 Inch Outlet – Horizontal or Vertical Mount, 800-1300 cfm
    Vendor:
    Fleetguard

    AP8405 Pre-cleaner- 8" outlet, Horizontal or Vertical mount, 800-1300 cfm

    Regular price $1,275.10 AUD
    Sale price $1,275.10 AUD Regular price
  • Fleetguard AP8404 Pre-cleaner- 6 Inch Outlet – Horizontal or Vertical Mount, 500-650 cfm
    Vendor:
    Fleetguard

    AP8404 Pre-cleaner- 6" outlet, Horizontal or Vertical mount, 400-650 cfm

    Regular price $986.50 AUD
    Sale price $986.50 AUD Regular price
  • Fleetguard AP8403 Pre-cleaner- 4 Inch Outlet – Horizontal or Vertical Mount, 100-300 cfm
    Vendor:
    Fleetguard

    AP8403 Pre-cleaner- 4" outlet, Horizontal or Vertical mount, 100-350 cfm

    Regular price $565.70 AUD
    Sale price $565.70 AUD Regular price

How does a Sy-Klone pre-cleaner work?

Vanes at the inlet spin the incoming air into a cyclone. Heavier particles and moisture are thrown to the outside wall and expelled through ejection slots, while the cleaner air passes through the centre to the air cleaner. There's no bowl to empty, but the unit still needs checking for blocked slots, cracks and secure mounting at each filter service.

How do I size a Sy-Klone?

Start with the engine's maximum airflow and pick a model whose rated range includes it, ideally near the middle. Then check the outlet matches the intake pipe. Where models share an outlet size, airflow decides between them. If the engine's airflow figure isn't to hand, the engine maker or the OEM manual will have it.

Horizontal or vertical mounting?

Follow the intake. Vertical mounting suits an upright stack, while horizontal mounting suits intakes that come out the side of a bonnet or engine bay. Make sure the ejection slots aren't blocked or aimed at the operator or another intake.

  • Engine maximum airflow
  • Intake pipe outside diameter
  • Mounting orientation
  • Clearance around the ejection slots
  • Dust, moisture and debris type

Weighing up other types? Compare TopSpin and Full View pre-cleaners, see all pre-cleaners, or send us your airflow figure.

Which AP series pre-cleaner suits my engine?

Pick by airflow, then check the outlet. The rated ranges below are from each unit's specifications:

  • AP8407: 51 mm outlet, 0.28–1.42 m³/min
  • AP8408: 76 mm outlet, 1.42–3.40 m³/min
  • AP8403: 102 mm outlet, 2.83–7.79 m³/min
  • AP8409: 102 mm outlet, 7.79–9.91 m³/min
  • AP8404: 152 mm outlet, 14.16–18.41 m³/min
  • AP8405: 203 mm outlet, 22.65–32.56 m³/min
  • AP8406: 203 mm outlet, 32.56–39.64 m³/min

Nothing in this range covers 9.91–14.16 or 18.41–22.65 m³/min. If your engine sits in either gap, a TopSpin covers it.

Will an AP series pre-cleaner clog up?

It's designed not to. Air enters under the dome through screened louvers that stop anything larger than the ejection slot, so nothing gets in that could block it. Curved accelerator blades throw dirt against the sidewall, angled strakes walk it round to the ejection slot, and only the cleaned air swirls down into the inlet.

Fleetguard rates it at 85% ejection. There's no element to service; check the louvers and slot are clear when you service the air filter.