Waste Oil Equipment (13)

Waste oil equipment catches, extracts and moves used oil out of engines, gearboxes and sumps, then gets it into a bulk tank for recycling. The main types are low level drainers that roll under vehicles, pit drainers that sit across a service pit, extractors that draw oil out through the dipstick tube, and evacuation valves for bulk waste tanks. Workshops, fleet depots, farms and lube trucks all need some of it. Choose pit or floor first, then size the drainer to the largest sump you drain. An undersized drainer overflows halfway through a truck or tractor oil change, which means oil on the floor and a clean-up before the next job. The buying guide under the products has the detail.

Ultraflo – AF-AP-MWOE6.5 – 6.5L manual oil extractor – front view

13 products

  • Graco 120581 4-Way Evacuation Valve, 1" NPT Female, Aluminium, 200 psi
    Vendor:
    Graco

    120581 4-Way Evacuation Valve, 1" NPT Female, Aluminium, 200 psi

    Regular price $1,212.80 AUD
    Sale price $1,212.80 AUD Regular price
  • Ultraflo AF-AP-5010 500cc manual oil suction gun
    Vendor:
    A-FLO Equipment

    AF-AP-5010 Manual Oil Suction Gun, 500cc, Diff, Gearbox & Engine Fill and Drain

    Regular price $46.40 AUD
    Sale price $46.40 AUD Regular price
  • RAASM – AF-RA-42075 – 150L heavy duty low level oil drainer – three-quarter view
    Vendor:
    RAASM

    AF-RA-42075 RAASM Heavy Duty 150L Low Level Waste Oil Drainer, Quick-Release Connector

    Regular price $2,701.60 AUD
    Sale price $2,701.60 AUD Regular price
  • RAASM – AF-RA-42072 – 95L heavy duty low level oil drainer – three-quarter view
    Vendor:
    RAASM

    AF-RA-42072 RAASM Heavy Duty 95L Low Level Waste Oil Drainer, Quick-Release Connector

    Regular price $1,729.20 AUD
    Sale price $1,729.20 AUD Regular price
  • RAASM – AF-RA-42069 – 50L heavy duty low level oil drainer – three-quarter view
    Vendor:
    RAASM

    AF-RA-42069 RAASM Heavy Duty 50L Low Level Waste Oil Drainer, Quick-Release Connector

    Regular price $1,106.60 AUD
    Sale price $1,106.60 AUD Regular price
  • RAASM – AF-RA-42056 – 150L rolling pit drainer – three-quarter view
    Vendor:
    RAASM

    AF-RA-42056 RAASM 150L Rolling Pit Drainer, Adjustable Carriage, Gravity Empty

    Regular price $2,777.50 AUD
    Sale price $2,777.50 AUD Regular price
  • RAASM – AF-RA-42062 – 110L rolling pit drainer – three-quarter view
    Vendor:
    RAASM

    AF-RA-42062 RAASM 110L Rolling Pit Drainer, Adjustable Carriage, Gravity Empty

    Regular price $1,670.90 AUD
    Sale price $1,670.90 AUD Regular price
  • RAASM – AF-RA-42060 – 65L rolling pit drainer – three-quarter view
    Vendor:
    RAASM

    AF-RA-42060 RAASM 65L Rolling Pit Drainer, Anti-Splash Screen, Adjustable Carriage

    Regular price $1,369.50 AUD
    Sale price $1,369.50 AUD Regular price
  • Ultraflo – AF-AP-MWOE6.5 – 6.5L manual oil extractor – front view
    Vendor:
    A-FLO Equipment

    AF-AP-MWOE6.5 6.5L Manual Waste Oil Extractor, Hand Pump, 3 Suction Probes

    2 in stock
    Regular price $218.90 AUD
    Sale price $218.90 AUD Regular price
  • Ultraflo – AF-AP-6427 – 95L low level waste oil drainer – three-quarter view
    Vendor:
    A-FLO Equipment

    AF-AP-6427 Standard 95L Low Level Waste Oil Drainer, Wheeled, Anti-Splash Screen

    Regular price $1,139.60 AUD
    Sale price $1,139.60 AUD Regular price
  • Ultraflo – AF-AP-5427 – 68L low level waste oil drainer – three-quarter view
    Vendor:
    A-FLO Equipment

    AF-AP-5427 Standard 68L Low Level Waste Oil Drainer, Wheeled, Anti-Splash Screen

    Regular price $1,109.90 AUD
    Sale price $1,109.90 AUD Regular price
  • RAASM – AF-RA-38132 – 4-way evacuation valve, 1-1/2" BSP – three-quarter view
    Vendor:
    RAASM

    AF-RA-38132 RAASM 4-Way Evacuation Valve, 1-1/2" BSP Female, 14 bar, Viton Seals

    Regular price $1,007.60 AUD
    Sale price $1,007.60 AUD Regular price
  • RAASM – AF-RA-38131 – 4-way evacuation valve, 1" BSP – three-quarter view
    Vendor:
    RAASM

    AF-RA-38131 RAASM 4-Way Evacuation Valve, 1" BSP Female, 14 bar, Viton Seals

    Regular price $933.90 AUD
    Sale price $933.90 AUD Regular price

Which type of oil drainer do I need?

It depends on how vehicles are presented. Low level drainers roll under cars, utes and machinery on the floor or on ramps. Pit drainers span a service pit on an adjustable carriage. High-lift drainers raise the funnel to a vehicle on a hoist. Extractors suit engines where the sump plug is hard to reach, drawing oil up the dipstick tube by suction.

How do you empty a waste oil drainer?

Most drainers empty one of three ways: by gravity through a drain valve, by air pressure that pushes the oil out through a hose into a bulk tank, or with a separate pump. Air-discharge drainers save tipping and lifting, which matters with heavy, hot oil.

  • Vehicle presentation: floor, ramp, hoist or pit.
  • Capacity, sized for the largest sump plus a margin.
  • Funnel height and diameter for clean catches.
  • Emptying method: gravity, air discharge or pump.
  • For evacuation valves: thread type (BSP or NPT), size and seal material to suit your tank and pump.

What happens to the waste oil?

Store used oil in a sealed tank on bunding and have it collected by an approved used oil recycler. Keep coolant, fuel and solvents out of it, as contaminated waste oil can be refused or cost more to remove.

Keep spills under control with spill kits and oil absorbents and spill containment bunding. For the fill side of the bay, see all oil equipment.

Which waste oil drainer do I need?

Choose by where the vehicle sits and how you'll empty the drainer.

For trucks, tractors and plant, size up: one engine's oil change can fill a smaller tank.

What's the difference between gravity and suction emptying?

A suction-emptied drainer is pumped out through a quick-release connector, so nobody tips or carries a full tank; a gravity drainer drains out under its own weight.

The suction models, RAASM's AF-RA-42069, AF-RA-42072 and AF-RA-42075, need a suction pump or waste oil evacuation system to empty them. That matters on the 150 L unit, which RAASM notes weighs well over 100 kg full.

The pit drainers empty by gravity, with a 30 mm hose holder to keep the drain hose tidy. Whichever you choose, empty it into your bulk waste oil tank or collection drum before it reaches capacity.

Will a rolling pit drainer fit my pit?

Probably, because the carriage wheels adjust to span the pit, but the adjustment range isn't on our listings. Measure your pit width and send it to us before ordering, and we'll confirm the carriage fits.

For reference, the pit drainers are 1,200–1,250 mm long and 650–660 mm wide: the AF-RA-42060 is 1,200 × 660 × 250 mm, the AF-RA-42062 1,250 × 650 × 280 mm and the AF-RA-42056 1,250 × 650 × 380 mm.

Set the carriage to your pit width before first use and check it sits securely on both edges.

Can coolant go in the same drainer as waste oil?

Only in the RAASM suction-emptied floor drainers. The AF-RA-42069, AF-RA-42072 and AF-RA-42075 are rated for antifreeze as well as engine, gearbox and diff oils, but keep the two separate when emptying so your waste collector will accept them.

  • Pit drainers: engine, gearbox and differential oil only, and not for flammable or corrosive liquids.
  • Ultraflo floor drainers: engine, gearbox and differential oils.
  • AF-AP-MWOE6.5 extractor: oils only, up to 100 °C; not fuels, solvents, acids or alkalis.

What does a 4-way evacuation valve do?

It lets one pump both fill a tank and empty it, switched with a handle instead of a set of separate valves. On a lube truck, one position fills the truck's tank from bulk; the other empties its waste oil tank to a bulk waste tank. Both makers state flow is unrestricted, with no pressure or volume loss.

  • RAASM AF-RA-38131: 1" BSP female, 14 bar, Viton seals.
  • RAASM AF-RA-38132: 1-1/2" BSP female for higher-flow lines.
  • Graco 120581: 1" NPT female, 13.8 bar, aluminium body, quarter-turn handle. Not for halogenated hydrocarbon solvents or chlorine bleach, and not approved for hazardous locations.

Pick by the thread in your pipework first.

How do I drain a diff or gearbox with no usable drain plug?

Draw the oil out from above. The AF-AP-5010 suction gun holds 500cc per draw and is listed for draining and filling diffs, gearboxes and engines, so the same tool takes the old oil out and puts the new oil in.

For a sump, the AF-AP-MWOE6.5 extractor pulls up to 6.5 L through the dipstick tube with a hand pump, using one of three suction probes (9.8, 6.7 and 5.8 mm OD). Warm the engine first so the oil flows, and keep it to oils at no more than 100 °C.