Standard element, strainer or coalescer?
Each does a different job. A standard cartridge filters particles from the oil, a suction strainer is a coarse screen that protects the pump inlet from larger debris, and a coalescing element gathers fine water droplets so they can be separated out. Check what's coming out of the housing before ordering.
Choosing a hydraulic filter element
- Media: cellulose, synthetic or wire mesh. Fit at least the media the housing came with.
- Micron and efficiency: match the rating and, where it's given, the Beta-rated efficiency.
- Collapse rating: elements in pressure housings need a collapse or burst rating to suit the circuit.
- End caps and seals: elements of similar size vary in end caps, O-rings and length, so go by the part number on the old element or housing tag.
- Bypass: some elements include a bypass valve, while others rely on the housing.
What can the old element tell me?
Quite a lot about the system. Metal flakes point to component wear, a split or collapsed pleat suggests excessive pressure drop, and a sludgy or gummy element can mean water or oil breakdown. If anything looks unusual, take an oil sample before the machine goes back to work.
If your machine runs cans instead, see spin-on hydraulic filters. Every hydraulic option is under hydraulic filters, condition gauges are in hydraulic filter service indicators, and if the housing is unmarked, get in touch.
