How does a TopSpin work?
Inlet vanes set the incoming air spinning, and centrifugal force throws heavier dust to the outside, where it's ejected back to atmosphere. Cleaner air passes down the centre to the air cleaner, so the element only sees what the pre-cleaner misses. Because nothing collects, there's no bowl to forget, which is the main advantage over clear-bowl designs on machines that aren't checked daily.
Do TopSpin pre-cleaners need maintenance?
Very little, but they still need a look. Check for cracks, blocked ejection areas, mud wasp nests and a loose fit on the pipe at every filter service. A pre-cleaner that's cracked or loose stops separating properly.
TopSpin, TopSpin HD or Strata Cap?
Pick by conditions and clearance. The standard TopSpin suits most dusty work. Step up to the all-metal HD for mining-grade dust, heat or impact, and look at a Strata Cap when height above the stack is limited. Whichever you choose, the outlet should suit the intake pipe without adaptors that add extra joints.
- Intake pipe outside diameter
- Engine airflow against the rating
- Height clearance above the stack
- Mounting style on the pipe
- Dust load and heat
Compare the all-metal TopSpin HD and low-profile Strata Caps, see all pre-cleaners, or check a part number with us if the label has faded.
