OAT or hybrid coolant: what's the difference?
OAT coolants protect for long intervals without additives, while hybrids are maintained with SCA. Organic acid technology (OAT) coolants are usually nitrite-free and need no supplemental coolant additive. Hybrid coolants combine organic acids with conventional inhibitors and are topped up with SCA, as a liquid or through a coolant filter, to keep diesel cylinder liners protected. Some engines, including many European cars, call for a silicated OAT. Colour is no guide to chemistry, so go by the spec on the label.
Premix or concentrate?
Premix is ready to use, while concentrate lets you set the strength. Mix concentrate with demineralised water, because the minerals in tap or bore water can form scale and use up inhibitors.
Do you need glycol freeze protection?
Yes, wherever the engine might see frost. Glycol coolants protect against freezing and raise the boiling point. Water-based coolants without glycol carry corrosion inhibitors only, and suit engines that never see sub-zero temperatures, where the engine maker approves them.
How do you change coolant type?
Flush first, never mix. Different chemistries dilute each other's protection, so drain the old coolant, clean the system with a radiator flush, rinse with clean water, then refill with the new type. Afterwards, test strips confirm freeze protection, inhibitor or SCA level and whether the coolant is due for replacement. Use the strip made for that chemistry.
- Chemistry the engine maker specifies: OAT, hybrid or silicated OAT.
- Premix or concentrate, and your water quality.
- Glycol or water-based, depending on frost risk.
- SCA maintenance for hybrid systems.
- Test strips that match the coolant.
Fit new coolant filters at the change, and add a heavy-duty diesel engine oil if the oil is due too. Not sure what's in the engine? Tell us the engine and the coolant it calls for.
