AdBlue Flow Meters (1)

AdBlue flow meters measure how much diesel exhaust fluid (DEF) leaves an IBC, tank or fill point, so usage can be recorded, charged to jobs or checked against stock. Fleet depots and contractors fit them in-line between the pump and nozzle, or use a hand-held meter at the end of the hose. The meter must be made for AdBlue, with wetted parts that won't corrode or shed contamination into the fluid.

After that, match the flow range to your pump and the connections to your hose. A meter not made for DEF wears and reads inaccurately, so the numbers drift away from what's actually being dispensed. Check your pump's flow and fittings before you choose.

AdBlue Flow Meters

1 product

  • PIUSI F0040710A K24 In-Line Digital Flow Meter – Adblue and Water, 1 Inch BSP Inlet/outlet, 10 Bar, 6-120 Lpm
    Vendor:
    PIUSI

    F0040710A K24 In-Line Digital Flow Meter, Adblue & Water, 1" BSP inlet/outlet, 10 bar, 6-120 lpm

    Regular price $535.70 AUD
    Sale price $535.70 AUD Regular price $535.70 AUD

Digital or mechanical AdBlue meter?

Digital for easy reading and calibration, mechanical where you'd rather not rely on a battery. Digital meters usually show both a resettable batch total and a running total, and many can be calibrated on site through the display. Mechanical meters read directly off a register and keep working when a battery would have gone flat.

In-line meter or metered nozzle?

An in-line meter fits into an existing hose and works with any nozzle. A metered nozzle combines the two in one unit, which keeps the setup tidy on a hose reel. Either way, compare these specs:

  • Wetted parts compatible with AdBlue
  • Flow range covering your pump's output
  • Inlet and outlet thread and size
  • Maximum working pressure
  • Display type, or pulse output for a fuel management system
  • Stated accuracy and how it's calibrated
  • Battery type and how easily it's changed

Do AdBlue meters need calibrating?

Yes, check them on installation and at regular intervals. Dispense into a calibrated container at your normal flow rate, compare the reading and adjust following the maker's procedure. Accuracy shifts with flow rate, so calibrate at the speed you actually pump. A meter that reads a little high or low on every fill adds up quickly over a year of jobs.

Compare every meter we carry in flow meters for all fluids, get a meter built in with a metered AdBlue nozzle, or pair the meter with an AdBlue pump kit. Unsure about fittings? Ask us.

Should I use an in-line AdBlue meter or a metered nozzle?

Either records litres per fill; the difference is where you read it.

  • In-line meter: the K24 F0040710A sits in the hose line and reads 6–120 lpm to ±1% after calibration. It runs on two AAA batteries and its display rotates to four positions, so you can mount it where the plumbing suits and still read it.
  • Metered nozzle: the Bluequip Genius AF-FP-A10M shows the volume at the nozzle, where the operator is looking, with no separate meter on the hose.

Some kits already include one: the Pro kit and the Premium kit have a K24 meter, and the AF-FP-201B103M has a PIUSI SB325 metered nozzle. If you'll sell AdBlue to customers by volume, check the meter's trade measurement status first.

Will the K24 AdBlue meter connect to my pump and reel?

It has 1" BSP inlet and outlet connections, so check the size of whatever it joins. Much of the AdBlue gear here is 3/4": the RAASM 8436.252 reel is G 3/4", the Graco 24G745 AdBlue pump has 3/4" BSPP ports, and the Basic, Pro and 24V kits and the Polycube ute tanks run 3/4" hose.

You'll need 1" to 3/4" BSP reducing fittings in an AdBlue-compatible material such as stainless steel, never brass. Those fittings aren't listed on our site, so ask us and we'll match them to your setup.