Spin-on Fuel Water Separators (273)

Spin-on fuel water separators filter dirt and separate water from diesel in a single can, before either reaches the pump and injectors. They're the primary filter on many trucks, tractors, earthmovers, gensets and marine diesels, and on some engines the only water protection fitted. Water collects at the base of the can, where a drain valve, clear bowl or water-in-fuel sensor lets you deal with it. Micron rating and the drain or bowl setup are the choices that matter. Choose a can without the drain or sensor port your system expects and you lose the easy check for water, or trigger a fault light. Drain, bowl and standpipe options are explained under the product grid.

Spin-on Fuel Water Separators

273 products

  • Baldwin BF988 Fuel Filter – Spin-on
    Vendor:
    Baldwin

    BF988 Fuel Filter- Spin-on

    Regular price $18.00 AUD
    Sale price $18.00 AUD Regular price
  • Baldwin BF1267 Fuel/ Water Separator – Spin-on, Drain
    Vendor:
    Baldwin

    BF1267 Fuel/ Water Separator, Spin-on, Drain

    2 in stock
    Regular price $54.00 AUD
    Sale price $54.00 AUD Regular price
  • Fleetguard FS20002 Fuel/ Water Filter – Spin-on, Open Port
    Vendor:
    Fleetguard

    FS20002 Fuel/ Water Filter- Spin-on, Open Port

    1 in stock
    Regular price $120.80 AUD
    Sale price $120.80 AUD Regular price
  • Fleetguard FS1280 Fuel/ Water Filter – Spin-on, Drain, 20 micron
    Vendor:
    Fleetguard

    FS1280 Fuel/ Water Filter- Spin-on, Drain, 20 Mic

    5 in stock
    Regular price $33.00 AUD
    Sale price $33.00 AUD Regular price
  • Baldwin BF7681-D Primary Fuel/Water Coalescer – Cartridge, Drain
    Vendor:
    Baldwin

    BF7681-D Fuel/Water Coalescer- Element, Primary, Drain

    Regular price $46.50 AUD
    Sale price $46.50 AUD Regular price
  • Baldwin BF7675-D Secondary Fuel/ Water Separator – Cartridge, Drain
    Vendor:
    Baldwin

    BF7675-D Fuel/ Water Separator- Element, Secondary, Drain

    3 in stock
    Regular price $39.00 AUD
    Sale price $39.00 AUD Regular price
  • Baldwin BF1257 Fuel/ Water Separator – Spin-on, Drain, IPS
    Vendor:
    Baldwin

    BF1257 Fuel/ Water Separator, Spin-on, Drain, IPS

    Regular price $39.00 AUD
    Sale price $39.00 AUD Regular price
  • Fleetguard FS19816 Fuel/ Water Filter – Spin-on
    Vendor:
    Fleetguard

    FS19816 Fuel/ Water Filter- Spin-on

    Regular price $95.10 AUD
    Sale price $95.10 AUD Regular price
  • Fleetguard FS19641 Fuel/ Water Filter – Spin-on, Stratapore Media, Drain
    Vendor:
    Fleetguard

    FS19641 Fuel/ Water Filter- Spin-on, Stratapore Media, Drain

    4 in stock
    Regular price $33.10 AUD
    Sale price $33.10 AUD Regular price
  • Fleetguard FS1212 Fuel/ Water Filter – Spin-on, Drain, 20 micron
    Vendor:
    Fleetguard

    FS1212 Fuel/ Water Filter- Spin-on, Drain, 20 Mic

    6 in stock
    Regular price $30.10 AUD
    Sale price $30.10 AUD Regular price
  • Baldwin BF1212 Fuel/ Water Separator – Spin-on, Drain
    Vendor:
    Baldwin

    BF1212 Fuel/ Water Separator, Spin-on, Drain

    3 in stock
    Regular price $32.40 AUD
    Sale price $32.40 AUD Regular price
  • Donaldson P502566 fuel filter water separator with a black gasket, shown on a white background.
    Vendor:
    Donaldson

    P502566 Fuel Filter/ Water Separator, Spin-on, Open Port, 12um, Cellulose

    Regular price $51.40 AUD
    Sale price $51.40 AUD Regular price $40.00 AUD
  • Sakura SFC-8801-10 Secondary Fuel/ Water Filter – Spin-on, Open Port, 10 micron
    Vendor:
    Sakura

    SFC-8801-10 Fuel/ Water Filter- Spin-on, Open Port, Secondary, 10 Mic

    6 in stock
    Regular price $17.50 AUD
    Sale price $17.50 AUD Regular price
  • Fleetguard FS19652 Fuel/ Water Filter – Spin-on, Drain, Tube
    Vendor:
    Fleetguard

    FS19652 Fuel/ Water Filter- Spin-on, Drain, Tube

    Regular price $94.20 AUD
    Sale price $94.20 AUD Regular price
  • Fleetguard FS19551 Fuel/ Water Filter – Spin-on, Open Port
    Vendor:
    Fleetguard

    FS19551 Fuel/ Water Filter- Spin-on, Open Port

    2 in stock
    Regular price $73.80 AUD
    Sale price $73.80 AUD Regular price

How does a fuel water separator work?

The media sheds free water, which is heavier than diesel, so it sinks to a collection area at the bottom of the can. From there it's drained off by hand or picked up by a sensor. Separators handle free water well, but emulsified water and heavily contaminated fuel can overwhelm them, which is why tank housekeeping still matters.

Choosing a spin-on separator

  • Micron and position: coarser separators work as primaries, finer ones as secondaries. Match the rating on the can you're replacing.
  • Drain style: a drain valve in the base, a bowl thread for a clear bowl, or an open port that takes a separate drain or sensor fitting.
  • Water-in-fuel sensor: if a sensor was fitted to the old can or bowl, choose one that accepts it.
  • Standpipe or not: some heads only work with a standpipe-type filter.
  • Media: synthetic and multi-layer media aren't always like-for-like with plain cellulose.

How often should I drain it?

At every service as a minimum, and many operators check it at the daily pre-start on machines working in wet or humid conditions or filling from site tanks. Change the can at the interval your engine maker sets, or sooner if you keep finding water.

For filter-only cans see spin-on fuel filters, and for replacement bowls see fuel filter bowls, heads and assemblies. Fighting water and bug in the tank? Try fuel treatments and biocides, or ask us about micron ratings.

Do I need the drain, open-port or sensor version of a fuel/water separator?

The same as the one you're taking off. The base of a spin-on separator has to match what's fitted underneath it on your machine.

  • Drain: a built-in drain valve, for systems with nothing attached below the filter. Baldwin uses a -D suffix, and Donaldson's Twist&Drain separators, such as the P583087, drain by hand without tools.
  • Open port: an open base that takes a bowl, such as the FS1015 or Sakura's SFC-7912-10. Move a sound bowl across from the old filter, or buy one from fuel filter bowls, heads and assemblies.
  • Sensor: for engines with a water-in-fuel warning. Baldwin's -SP has a sensor port, and the -SPS versions, such as the BF1274-SPS, carry a reusable sensor that transfers to each new filter. Fleetguard's FS19596 comes with the sensor.

Running Donaldson Twist&Drain separators without a warning light? The X220112 kit replaces the drain with a sensing drain valve and adds a dash LED display. It fits any Donaldson Twist&Drain fuel filter and runs on 12V or 24V.

Separators come in 2 to 30 micron versions of the same can. Which one do I need?

The rating your engine maker specifies for that position, matched by part number. Primary and secondary versions often share a can, so the shelf won't tell you which is which.

  • Sakura's SFC-1306-30 primary at 30 micron and SFC-1306-10 secondary at 10 micron share a 108 mm can and 117 mm height, but the gasket inner diameter differs, 72 mm against 80 mm.
  • The SFC-8801-10 at 10 micron and SFC-8801-2 at 2 micron share their can, gasket and M18 x 1.5 thread.
  • Where long life matters, Fleetguard note that primaries are usually 25 or 50 micron elements at 98.7% efficiency.

Read the rating off the filter you're removing, or match its number through the cross-reference, before you order.

My housing takes a primary and a secondary element. Does it matter which goes where?

Yes. In two-stage housings such as the Stanadyne Fuel Manager systems on John Deere and Caterpillar equipment, the primary is a coalescer that pulls out the bulk of the water and larger dirt, and the secondary does the finer filtration. Swap them and the coarse element ends up where the fine one should be.

  • Baldwin paints primaries red and secondaries white so you can tell at a glance.
  • Each listing names its partner: the BF7672-D primary runs with the BF7673-D or BF7674-D secondary.
  • Baldwin removed the OE alignment keys, so these elements fit several OE bases without lining up tabs.

Renew the attached grommet with each element.

What happens if water gets past the separator on a common-rail engine?

It damages the injection system, and on common rail the damage is quick and costly. Fleetguard state that common-rail systems cannot have even small amounts of water in the injectors.

  • Water doesn't lubricate like diesel, so pumps and injectors that rely on the fuel for lubrication wear early.
  • Iron components rust and corrode, shedding abrasive particles into the system.
  • Metering components stick, and injection parts wear and seize.
  • Free water in tanks feeds microbial growth, which blocks filters and corrodes tanks.

The separator is the defence, and it only works if it's drained and changed on time. Treat a water-in-fuel warning as an instruction to stop and drain.

How often should I drain water from a separator, and why does it keep filling?

Drain it as often as your equipment manual says, every time the water-in-fuel warning comes on, and whenever water shows in a clear bowl. On glass-bowl units such as the BF909, the instruction is simply to drain when water appears in the window.

Don't let a separator fill. Fleetguard warn that a water-logged primary element stops working effectively and is especially prone to waxing in cold weather.

If you're draining more water than usual, the source is usually upstream: condensation in part-full storage tanks (as a warm tank cools overnight it draws in moist air, which condenses into the fuel), poor tank seals or a wet delivery. Fix the tank and the separator goes back to catching the occasional slug of water it was designed for.