Air Operated Grease Pumps (6)

Air operated grease pumps are bare pumps built to sit in a grease pail or drum and deliver grease at high pressure to a gun, reel or lube line. Sold without hose or gun, they suit workshops, lube bays and service trucks building or upgrading their own setup. Container size and pump ratio are the two things to get right: the pump tube has to suit the pail or drum, and the ratio has to be high enough to push your grease through the hose length you're running. With too little pressure, fittings get half a shot and bearings run dry. Each pump also needs the follower plate and cover made for it. Start with your container and work from there.

Air Operated Grease Pumps

6 products

  • Graco 205394 Fire-Ball 425 Series 50:1 Grease Pump, 55 kg Drum – front view
    Vendor:
    Graco

    205394 Fire-Ball 425 Series 50:1 Grease Pump, 55 kg Drum

    Regular price $6,641.30 AUD
    Sale price $6,641.30 AUD Regular price
  • Graco 205395 Fire-Ball 425 Series 50:1 Grease Pump, 180 kg Drum – front view
    Vendor:
    Graco

    205395 Fire-Ball 425 Series 50:1 Grease Pump, 180 kg Drum

    Regular price $6,641.30 AUD
    Sale price $6,641.30 AUD Regular price
  • Graco 239888 Fire-Ball 300 Series 50:1 Grease Pump, 180 kg Drum – front view
    Vendor:
    Graco

    239888 Fire-Ball 300 Series 50:1 Grease Pump, 180 kg Drum

    Regular price $2,885.20 AUD
    Sale price $2,885.20 AUD Regular price
  • Graco 239877 Fire-Ball 300 Series 50:1 Grease Pump, 16 kg or 32 kg Pail
    Vendor:
    Graco

    239877 Fire-Ball 300 Series 50:1 Grease Pump, 16 kg or 32 kg Pail

    Regular price $2,563.30 AUD
    Sale price $2,563.30 AUD Regular price
  • Graco 24G608 LD Series 50:1 Grease Pump, 180 kg Drum, BSPT – front view
    Vendor:
    Graco

    24G608 LD Series 50:1 Grease Pump, 180 kg Drum, BSPT

    Regular price $909.60 AUD
    Sale price $909.60 AUD Regular price
  • Graco 965124 Fire-Ball 425 Series 10:1 Stubby Grease Pump, 180 kg Drum
    Vendor:
    Graco

    965124 Fire-Ball 425 Series 10:1 Stubby Grease Pump, 180 kg Drum

    Regular price $12,012.00 AUD
    Sale price $12,012.00 AUD Regular price

What ratio grease pump do I need?

Most grease dispensing pumps are high ratio, often 50:1 or more, to move thick grease down a hose to a gun or reel. Lower ratio pumps exist for transferring grease in bulk, such as filling another container, but aren't suited to greasing through fittings. Check the ratio against your grease grade and line length before you order.

Matching the pump to the container

Grease pumps come in different pump tube lengths for pails and drums. A tube that's too short leaves grease in the bottom, and one that's too long won't seat. The follower plate and drum cover must match both the pump and the container diameter.

  • Container type and size.
  • Ratio and maximum outlet pressure.
  • Outlet thread, BSP or NPT, for hoses and valves.
  • The grease grade the pump is rated for.
  • Air consumption against your compressor's output.

Bare pump or complete kit?

Buy a bare pump when replacing an existing unit or designing your own system. A kit is simpler for a new setup because the hose, valve and fittings already match.

Add a follower plate, cover and dispense valve from grease pump accessories, or move the drum on a drum cart. Prefer a complete setup? See grease pump kits.

Which Graco grease pump suits our grease usage?

Size the pump on how much grease you use in a year and how many guns or reels run at once, then pick the length that suits your container.

  • LD 50:1: the lower-volume pump, for one dispense point. The 24G608 suits 180 kg drums and has BSPT ports.
  • Fire-Ball 300 50:1: mid volume, for one or two dispense points. The 239877 suits 16 kg or 32 kg pails and the 239888 180 kg drums.
  • Fire-Ball 425 50:1: a larger 108 mm air motor for long pipe runs and four or more guns working at once. The 205394 suits 55 kg drums and the 205395 180 kg drums.

The comparison table gives Graco's annual usage and line length figures for each.

What else do we need to order with a bare pump?

Each pump ships on its own, so plan the rest of the system before it arrives.

  • Follower plate and cover: sized to the pump and container. The LD needs a follower plate to draw from the drum at all.
  • Hose and dispenser: a hose kit, plus a dispense valve or a grease hose reel.
  • Air regulator: Graco requires one with a relief valve on the LD (24H419 for BSP models) and recommends a regulator, air filter and line oiler on the Fire-Ball pumps.
  • Safety items: Graco requires a bleed-type master air valve and a 222011 ground wire and clamp on every pump, and a fluid drain valve on Fire-Ball 300 pumps.

Our grease pump accessories page matches the follower plates, covers, hose kits and dispense valves to each pump. Parts shown without a link are available on request.

Can we run these pumps into a grease hose reel?

Yes, but regulate the air first. The Graco XDH55F grease reel, with 15 m of 3/8" hose, is built for a grease line from a high-ratio pump. Graco requires a 218550 hose inlet kit on it (none comes with the reel), rated to 276 bar, and that sets the working limit of the installation. These 50:1 pumps can build 517–579 bar, so set the pump's air regulator to 5.5 bar or less, which holds a 50:1 pump under 276 bar.

On the BSPT 24G608, the reel inlet also needs an adapter from the pump's BSPT outlet. Parts shown without a link are available on request.

How much compressed air do these pumps use?

From about 450 lpm for the LD to about 1,300 lpm for the 10:1 Fire-Ball 425. Graco's figures at 6.9 bar and 80 cycles per minute:

  • LD 50:1: about 450 lpm, on 1.4–10.3 bar air.
  • Fire-Ball 300 50:1: about 590 lpm, on 3.0–9.7 bar air.
  • Fire-Ball 425 50:1: about 1,200 lpm, on 2.8–10.4 bar air.
  • Fire-Ball 425 10:1: about 1,300 lpm, on 2.8–12.5 bar air.

Check those figures against your compressor's output with everything else on the air line running.

Are the pump ports NPT or BSP?

NPT on every pump except the 24G608, which has 1/4" BSPT air and fluid ports.

  • Fire-Ball 300 (239877, 239888): 3/8" NPT air inlet, 1/4" NPT fluid outlet.
  • Fire-Ball 425 50:1 (205394, 205395): 1/2" NPT air inlet, 3/8" NPT fluid outlet.
  • Fire-Ball 425 10:1 (965124): 1/2" NPT air inlet, 1" NPT fluid outlet.

NPT and BSP are different thread forms and won't seal into each other, so fit adapters where an NPT port meets a BSP air line or hose.

What warranty do Graco grease pumps carry?

Graco's catalogue lists a 10 year warranty on Fire-Ball 425 pumps, 7 years on Fire-Ball 300 and 5 years on LD Series 50:1 grease pumps. That sits alongside your rights under Australian Consumer Law.