Which industrial gear oil do you need?
The type and ISO grade on the gearbox nameplate. Heavier grades such as ISO 220 and 320 are common in enclosed gear drives, and EP gear oils are often specified to DIN 51517-3 (CLP) or AGMA standards. Worm gears and very hot gearboxes may call for a synthetic. Polyglycol (PAG) synthetics must not be mixed with mineral oils, so confirm what's in the box before topping up.
What makes a compressor oil different?
It's built to resist oxidation and carbon at high temperatures. Rotary screw and reciprocating compressors have different needs, so use the oil type the compressor maker lists, such as a DIN 51506 VDL oil for many reciprocating units. Never top up with engine or hydraulic oil, and change the air and oil separator on schedule.
What does a slideway oil do?
It keeps machine tool slides moving smoothly. Tackifiers help the oil cling to vertical ways, and friction modifiers stop the jerky stick-slip that ruins accuracy. Slideway oils are also formulated to separate from water-based cutting coolants rather than emulsify with them.
- Oil type named by the equipment maker.
- ISO viscosity grade from the nameplate or manual.
- Standard: DIN, AGMA or the OEM's own spec.
- Mineral or synthetic, and compatibility with what's already in the system.
- Operating temperature and duty cycle.
Servicing a compressor? Add air compressor filters and air and oil separators. For hydraulic systems, go to hydraulic oil. Ask us if the nameplate is unreadable.
