Diesel Transfer Pumps (20)

Diesel transfer pumps move fuel from a tank, drum or IBC into machines and vehicles, usually through a hose and nozzle. Many are self-priming rotary vane pumps driven by a 12V or 24V vehicle battery or 240V mains, and hand pumps fill the gap where there's no power at all. Pumps sold in 12V and 24V are listed as one product, so you pick the voltage variant that matches your vehicle.

Power source and flow rate decide most of the choice, followed by duty cycle, which is how long the pump can run before it needs a rest. Size the pump too small and every refuel turns into a wait, or a hot motor and a flat battery. Narrow it down by power first, then compare flow.

Diesel Transfer Pumps

20 products

  • PIUSI – AF-FP-397000 – ST E120 diesel dispenser with K33 meter and A120 nozzle – main view
    Vendor:
    PIUSI

    AF-FP-397000 ST E120 240V Diesel Dispenser, K33 Meter & A120 Auto Nozzle, 90 lpm

    Regular price $2,072.40 AUD
    Sale price $2,072.40 AUD Regular price
  • PIUSI – AF-FP-392000 – ST E80 diesel dispenser with K33 meter and A80 nozzle – main view
    Vendor:
    PIUSI

    AF-FP-392000 ST E80 240V Diesel Dispenser, K33 Meter & A80 Auto Nozzle, 75 lpm

    Regular price $1,894.50 AUD
    Sale price $1,894.50 AUD Regular price
  • PIUSI – AF-FP-287P0A – ST Panther 56 diesel dispenser with K33 meter and A60 nozzle – main view
    Vendor:
    PIUSI

    AF-FP-287P0A ST Panther 56 240V Diesel Dispenser, K33 Meter & A60 Auto Nozzle, 56 lpm

    Regular price $1,328.30 AUD
    Sale price $1,328.30 AUD Regular price
  • A-FLO AF-AP-1320F Premium 60L & 205L Hi-Flow Rotary Drum Pump with 1" Filter, 100 lpm
    Vendor:
    A-FLO Equipment

    AF-AP-1320F Premium 60L & 205L Hi-Flow Rotary Drum Pump with 1" Filter, 100 lpm

    Regular price $720.50 AUD
    Sale price $720.50 AUD Regular price
  • A-FLO AF-AP-1320 Premium 60L and 205L Hi-Flow Rotary Drum Pump
    Up to $126.40 off
    Vendor:
    A-FLO Equipment

    AF-AP-1320 Premium 60L & 205L Hi-Flow Rotary Drum Pump, 100 lpm

    1 in stock
    Regular price $505.00 AUD
    Sale price $505.00 AUD Regular price $631.40 AUD

Electric or manual diesel pump?

Go electric for regular refuelling and manual for occasional drum work or as a backup. Both have their own category:

What flow rate do I need?

Enough to fill your biggest tank in a sensible time, without outrunning the hose and nozzle. Rated flow is measured in ideal conditions. Long hose runs, small-bore hose, inline filters, suction lift and low battery voltage all pull the real figure down, so allow some headroom. These are the specs to compare:

  • Power source: 12V, 24V, 240V or manual
  • Flow rate in litres per minute
  • Duty cycle: intermittent or continuous
  • Inlet and outlet size and thread
  • Bypass valve, so the pump isn't damaged when the nozzle closes
  • Suction strainer or filter on the inlet

Can a diesel pump move petrol?

Not unless it's certified for it. Petrol gives off flammable vapour at normal temperatures, so it needs a pump certified for hazardous areas under ATEX or IECEx, plus earthed hose and fittings. Diesel has a much higher flash point, which is why standard diesel pumps don't carry that certification. Don't use a diesel pump for AdBlue or water either, as the internals aren't made for them.

Finish the setup with an automatic shut-off nozzle, a diesel hose reel and a flow meter, or ask us which pump suits your tank and power supply.

Battery, mains, hand or air: which type of diesel pump suits my site?

Pick by the power you have where the fuel is stored, then by how long the pump has to run in one go.

  • 12V or 24V battery: for utes, service trucks and mobile tanks. The battery pumps here are rated for 30 minute runs, so they suit refuelling machines rather than emptying bulk tanks. See electric transfer pumps.
  • 240V mains: for a fixed bulk tank, including continuous-duty pumps and ready-made metered dispensers. Also in electric transfer pumps.
  • By hand: for 60L and 205L drums with no power at all. See manual transfer pumps.
  • Compressed air: diaphragm pumps for sites with a compressor. Not every model is rated for diesel, so check the fluid list. See air operated transfer pumps.

Moving petrol, or working in a hazardous area? You need one of the ATEX pumps covered under electric transfer pumps.

What does a 30 minute duty cycle mean for a battery pump?

It means the pump is rated to run for up to 30 minutes at a time, then needs to stop and cool before the next run. That covers refuelling machines and topping up tanks, but not continuous bulk transfer.

If you regularly move fuel for more than half an hour in one go, a battery pump would be running outside its rating. For long transfers, use a continuous-duty 240V pump such as the Panther 72 or E120. The Panther 90 is faster than the Panther 72, but PIUSI doesn't rate it for continuous duty, so allow it to rest on long transfers.

How far from the tank can I mount the pump, and how high will it lift?

Keep the vane pumps within 6 m of the tank on a suction hose of at least 1". PIUSI's suction figures:

  • BP3000, BiPump, Panther 72 and Panther 90: up to 2 m suction lift, or 4 m with a non-return valve.
  • E120: self-primes to 2 m, or 4 m once primed with a non-return valve fitted.
  • E140: self-primes up to 4 m. Use a 1-1/2" suction hose and keep the delivery hose to 8 m or less.
  • 12V/24V refuelling kits: lift fuel up to 2 m.

The rated flow assumes you stay inside these limits. Mount the pump close to the tank outlet, and fit a non-return valve where the lift is more than 2 m.

What else do I need if I buy a pump-only model?

At minimum a delivery hose and a nozzle, plus suction hose and power to suit your install.

  • BP3000: supplied with the pump and manual only. Add hose, wiring from the battery and a nozzle.
  • BiPump: comes with flanged connections and a 2 m battery cable with clips. Add hose and a nozzle.
  • 240V pumps (Panther, E120, E140, EX100, EX140): hose, nozzle and meter are sold separately, and PIUSI asks for the power connection to be made by a licensed electrician.

Choose the nozzle by flow in diesel nozzles, add a meter from flow meters to count litres, and a diesel hose reel for a long hose at a fixed point. If you'd rather not size parts, the 12V/24V refuelling kits, the Pitstop 45, the ST metered dispensers and the EX drum kits come ready to run.

Can I use a diesel transfer pump for engine or hydraulic oil?

Not the electric pumps: PIUSI lists the battery and 240V vane pumps here for diesel (some also HVO), and not for oils.

For oil, use a pump rated for it:

  • The AF-AP-1320 hand drum pump is listed for oils up to SAE 30 as well as fuels. The filtered AF-AP-1320F is not for oils.
  • The RAASM AAB diaphragm pumps, such as the AAB-1, are rated for mineral and vegetable oils, diesel and water.
  • Several Graco Husky aluminium pumps are rated for engine and hydraulic oils.

See the full air operated transfer pumps range and check each pump's rated fluids.

For drum and IBC oil pumps, see oil pumps.