What does A-FLO make?
A-FLO builds storage, transfer and dispensing equipment for fuels, lubricants and AdBlue. The range is designed around how fluid moves on a working site, from the tank through a pump and meter to the nozzle or gun at the machine.
- Diesel Polycube ute tanks for refuelling from a ute, trailer or fixed site.
- LUBESMART oil storage: translucent jugs with interchangeable lids and spouts, so each oil grade keeps its own container.
- Grease equipment: hand guns, air operated pumps and pump kits for pails and drums.
- Flow meters for diesel, oil and other workshop fluids.
- Spill containment: drum and IBC pallets, bunding and spill kits.
- Bluequip AdBlue equipment: pumps, nozzles and tanks kept for AdBlue only.
How do I choose storage and transfer gear?
Start with the fluid, then the volume and the power source. Pump, hose and seal materials must suit the fluid, and the flow rate should match the size of the tanks you fill. Fixed sites usually run 240V or shop air, while vehicles run 12V or 24V. Check thread standards (BSP or NPT) before mixing components from different suppliers.
Why keep fluids separate?
Cross-contamination is the expensive failure. One jug shared between engine oil and hydraulic oil, or a pump that has moved diesel and then AdBlue, carries the wrong fluid into a system that can't tolerate it. Dedicated, labelled storage for each fluid costs very little by comparison.
Setting up a bay or a ute? Talk to us about the whole setup, or browse waste oil equipment and electric diesel transfer pumps.
