Dispensing AdBlue from a 1000 L IBC with a make-do setup is slow, messy and impossible to track. The Bluequip AF-FP-101320 Pro kit turns that into a proper metered dispensing point, built around a self-priming 240V pump on a stainless-steel IBC bracket.
The pump is a self-priming 240V unit rated at 35 lpm, mounted on a stainless-steel IBC bracket that holds the whole setup stable and supported rather than hanging off zip ties and bent brackets. A bottom suction kit draws the IBC down reliably, which keeps flow consistent and avoids the mid-fill stalls a poor pickup causes.
What makes it the Pro kit is control. An automatic shut-off nozzle helps prevent overfills, and a K24 digital flow meter shows exactly what goes into each tank, which turns AdBlue from a vague consumable into a measured input you can track for cost, jobs and waste. It ships with a 6 m by 3/4in hose, long enough to reach from the IBC to most fill points without dragging the unit around.
Fluid rated for AdBlue/DEF. It is built for SCR-equipped fleets, farm machinery and multi-asset sites dispensing AdBlue, and its stainless bracket and AdBlue-compatible path keep the setup clean. It is an AdBlue kit and is not for diesel or oils.
It runs on 240V mains, so it is a fixed workshop or shed dispensing point rather than a vehicle-powered unit, and it mounts to a standard 1000 L IBC. Site it within reach of a 240V supply and position the IBC so the 6 m hose covers your fill points.