AdBlue Equipment (28)

AdBlue equipment stores, pumps and dispenses diesel exhaust fluid (DEF) without contaminating it. Fleet depots, farms, workshops and mine sites use it to fill SCR-equipped trucks, tractors and machinery from drums, IBCs and bulk tanks. Materials decide everything here. AdBlue attacks brass, copper and other metals common in fuel gear, so pumps, hoses, nozzles and tanks must be made from compatible materials such as stainless steel and suitable plastics.

The other rule is dedication. Equipment that has handled diesel, oil or even tap water can carry enough contamination to damage an SCR catalyst and trigger engine derates. Choose the category that matches your container, and keep the gear for AdBlue only.

AdBlue Equipment

28 products

  • Graco 24G745 SD Blue Husky 515 PP Diaphragm Pump, 3/4" BSPP
    Vendor:
    Graco

    24G745 SD Blue Husky 515 PP Diaphragm Pump, 3/4" BSPP

    Regular price $1,570.80 AUD
    Sale price $1,570.80 AUD Regular price
  • Graco 24F529 SD Automatic Shut-Off DEF Nozzle with Swivel, Stainless Steel, 3/4" BSPP, 41.6 lpm – left-front view
    Vendor:
    Graco

    24F529 SD Automatic Shut-Off DEF Nozzle with Swivel, Stainless Steel, 3/4" BSPP, 41.6 lpm

    Regular price $1,065.00 AUD
    Sale price $1,065.00 AUD Regular price
  • Bluequip – AF-AE-PPM90ADB – manual AdBlue dispense gun – side view
    Vendor:
    Bluequip

    AF-AE-PPM90ADB Bluequip Manual AdBlue Dispense Gun for Gravity Feed, Polypropylene, 3/4" BSP Female Swivel, 90 lpm

    Regular price $136.40 AUD
    Sale price $136.40 AUD Regular price
  • Bluequip – AF-FP-A10 – Genius automatic AdBlue nozzle – side view
    Vendor:
    Bluequip

    AF-FP-A10 Bluequip Genius Automatic AdBlue Nozzle, No Hook, Non-Magnetic, Stainless Steel Tip, 1" BSP Male

    Regular price $676.50 AUD
    Sale price $676.50 AUD Regular price
  • Bluequip – AF-FP-A10M – Genius automatic AdBlue nozzle with built-in meter – side view
    Vendor:
    Bluequip

    AF-FP-A10M Bluequip Genius Automatic AdBlue Nozzle with Built-In Meter, Stainless Steel Tip, 1" BSP Male

    Regular price $1,309.00 AUD
    Sale price $1,309.00 AUD Regular price
  • Bluequip – AF-FP-A10H – Genius automatic AdBlue nozzle with hook – side view
    Vendor:
    Bluequip

    AF-FP-A10H Bluequip Genius Automatic AdBlue Nozzle with Hook, Non-Magnetic, Stainless Steel Tip, 1" BSP Male

    Regular price $798.60 AUD
    Sale price $798.60 AUD Regular price
  • Bluequip – AF-AE-KP2115A – air operated AdBlue IBC kit with 15m hose reel – main view
    Vendor:
    Bluequip

    AF-AE-KP2115A Air Operated AdBlue IBC Kit, 15m Spring Retractable Hose Reel & Auto Nozzle, 40 lpm

    Regular price $4,814.70 AUD
    Sale price $4,814.70 AUD Regular price
  • Bluequip – AF-AE-KP2110A – air operated AdBlue IBC kit with 10m hose reel – main view
    Vendor:
    Bluequip

    AF-AE-KP2110A Air Operated AdBlue IBC Kit, 10m Spring Retractable Hose Reel & Auto Nozzle, 40 lpm

    Regular price $4,661.80 AUD
    Sale price $4,661.80 AUD Regular price
  • Bluequip – AF-AE-KP21M – air operated AdBlue IBC pump kit with 4m hose and manual nozzle – main view
    Vendor:
    Bluequip

    AF-AE-KP21M Air Operated AdBlue IBC Kit, 2:1 Pump, 4m Hose & Manual Nozzle, 40 lpm

    Regular price $2,213.20 AUD
    Sale price $2,213.20 AUD Regular price
  • Bluequip AF-FP-206P1723A 240V AdBlue submersible pump top view with integrated pressure regulator and cable glands
    Vendor:
    Bluequip

    AF-FP-206P1723A 240V AdBlue Submersible Pump, Regenerative Turbine, 35 lpm

    Regular price $1,502.60 AUD
    Sale price $1,502.60 AUD Regular price
  • Bluequip – AF-FP-204010 – 24V AdBlue transfer pump kit with hose and manual nozzle – main view
    Vendor:
    Bluequip

    AF-FP-204010 24V AdBlue Transfer Pump Kit, 6m Hose & Manual Swivel Nozzle, 35 lpm

    Regular price $1,128.60 AUD
    Sale price $1,128.60 AUD Regular price
  • Bluequip – AF-FP-203010 – Suzzarablue 240V AdBlue diaphragm transfer pump – main view
    Vendor:
    Bluequip

    AF-FP-203010 Suzzarablue 240V AdBlue Diaphragm Transfer Pump, Self-Priming, 32 lpm

    Regular price $988.90 AUD
    Sale price $988.90 AUD Regular price
  • Bluequip – AF-FP-201B103M – Premium 240V AdBlue IBC pump kit with metered auto nozzle – main view
    Vendor:
    Bluequip

    AF-FP-201B103M Premium 240V AdBlue IBC Pump Kit, PIUSI SB325 Metered Auto Nozzle, 35 lpm

    Regular price $3,339.60 AUD
    Sale price $3,339.60 AUD Regular price
  • Bluequip – AF-FP-201B103 – Premium 240V AdBlue IBC pump kit with auto nozzle and meter – main view
    Vendor:
    Bluequip

    AF-FP-201B103 Premium 240V AdBlue IBC Pump Kit, PIUSI A60 Auto Nozzle & K24 Meter, 35 lpm

    Regular price $3,339.60 AUD
    Sale price $3,339.60 AUD Regular price
  • Bluequip – AF-FP-101330 – 240V AdBlue IBC transfer kit with manual nozzle – main view
    Vendor:
    Bluequip

    AF-FP-101330 Basic 240V AdBlue Transfer Kit for IBC, Manual Nozzle, No Meter, 35 lpm

    Regular price $2,310.00 AUD
    Sale price $2,310.00 AUD Regular price

Why does AdBlue need its own equipment?

Because it's a high-purity fluid that's easily contaminated and corrosive to some metals. AdBlue is made to ISO 22241: a solution of 32.5% high-purity urea in deionised water. Minerals, metals, fuel or oil picked up along the way can poison the SCR catalyst or block the dosing system, and those repairs cost far more than a dedicated pump. Each category below is built for DEF:

How should AdBlue be stored?

Sealed, clean and out of direct sun, in a container made for it. AdBlue freezes at around minus 11°C and can be used once thawed. Heat is the bigger problem in Australia, because high temperatures break the urea down and shorten its shelf life.

What should I check when setting up a fill point?

Plan from the container to the filler neck:

  • Container type: drum, IBC or bulk tank
  • Power at the container: battery, mains, air or none
  • DEF-compatible materials in every wetted part
  • Nozzle type, including magnetic nozzles for trucks that need them
  • Metering, if usage is charged to jobs
  • Clear labelling so nobody mixes up fluids

The FAQ below covers the common questions. Diesel gear lives in diesel equipment, and for a full dispensing point you can send us your volumes.

Which part of the AdBlue range do I need?

Start with how your AdBlue arrives and where you fill vehicles.

Whatever you choose, keep it on AdBlue only and apart from your diesel and oil gear.

Can I use my diesel or oil equipment for AdBlue?

No. Valvoline lists AdBlue as corrosive to copper, brass, mild steel and galvanised materials, and Donaldson adds carbon steel, zinc and aluminium. Diesel and oil gear isn't built for it: the PIUSI BiPump diesel pump is listed as not for AdBlue, the FuelShot FS-AL60 diesel nozzle has an aluminium body and isn't intended for AdBlue, and RAASM notes that AdBlue corrodes the steel and swells the seals a standard oil reel is built from.

Two things go wrong. The equipment corrodes, and the AdBlue picks up metal plus any fuel or oil residue, then carries it into the SCR system.

Buy dedicated AdBlue gear and keep it on AdBlue only. A pump, hose or nozzle that has carried diesel or oil shouldn't be moved over to AdBlue.

How do I stop AdBlue getting contaminated at the fill point?

Keep it in a closed system from container to filler, and keep the nozzle and hose off the ground. Anything that gets into AdBlue at the fill point goes straight to the vehicle's SCR system. The usual ways it gets in, and the gear that closes each one:

  • Pouring from an open drum: draw it with a sealed drum pump from manual AdBlue pumps instead.
  • Nozzle dropped on the ground: a hook nozzle such as the AF-FP-A10H hangs on the tank, IBC frame or pump bracket so the stainless tip stays clean.
  • Hose dragged across the floor: a spring-retractable reel keeps it off the floor and away from grit, as on the AF-AE-KP2110A air kit or the RAASM 8436.252 reel.
  • Open tanks on the move: the AdBlue Polycubes have a lockable lid and splash-proof breather to keep dust and moisture out.
  • Shared gear and wrong fittings: anything that has carried diesel or oil, and brass or galvanised fittings corroding into the line.

An automatic shut-off nozzle also stops the overfills that leave AdBlue crystallising around the filler.

Does AdBlue equipment need to meet ISO 22241?

ISO 22241 sets the quality of the fluid, so what you need from equipment is wetted materials that won't contaminate it. Makers state this in different ways:

  • The PIUSI Suzzarablue pump in the AF-FP-203010, the same pump family as the Premium IBC kits, uses materials chosen to comply with ISO 22241.
  • Others list AdBlue-compatible materials without citing the standard: the stainless steel AF-FP-3322A50 hand pump, the AISI 304 stainless flow path, EPDM hose and Viton seals on the RAASM 8436.252 reel, and the stainless steel, nickel and fluoroelastomer wetted parts of the Graco 24F529 nozzle.

For a procurement spec, ask for the wetted-materials list on each item and check it against the materials Valvoline and Donaldson list as compatible: HDPE, stainless steel and most plastics. For the fluid's own approvals, see AdBlue Fluid.