Compatibility note: This kit has a manual nozzle and no flow meter, so it will not stop automatically when the tank is full or record litres dispensed.
The AF-FP-101330 is the simplest way to put a 240V AdBlue dispensing point on a 1000L IBC. A self-priming 35 lpm pump sits on a stainless steel IBC bracket with a built-in nozzle holder, and a bottom suction kit draws from the IBC outlet.
Self-priming means the pump pulls AdBlue up from the IBC on start-up without being filled by hand first. The 6 m by 3/4" ID hose reaches most fill points from the IBC, and the stainless bracket keeps the setup off the ground and clear of contamination.
It suits workshops and yards that fill a small number of vehicles and do not need to track AdBlue use by vehicle or job.
Fluid rated for: AdBlue (DEF). Not for diesel, oils or other fluids.
At a glance: 240V, self-priming, 35 lpm | 6 m x 3/4" ID hose, manual nozzle | stainless steel IBC bracket, bottom suction kit
Supplied with pump, stainless IBC bracket and nozzle holder, manual nozzle, 6 m hose and bottom suction kit. The IBC and AdBlue are not included. Site it within reach of a 240V outlet.
To meter every fill, the AF-FP-101320 Pro kit adds a digital flow meter and automatic shut-off nozzle on the same stainless bracket. For a protected technopolymer housing, see the AF-FP-201B103 Premium kit.