The 647109 is the Husky 1050 aluminium pump with 1" BSPT fluid ports, stainless steel seats, PTFE balls and a two-piece PTFE/EPDM diaphragm. Graco's compatibility ratings for these materials include diesel, acetone, mineral spirits, alcohols, oils and coolant, and the PTFE parts take hotter fluids than the Geolast build. Halogenated hydrocarbon solvents remain excluded, as in every aluminium pump. The 647121 differs only in its Geolast seats, balls and diaphragm, for neutral-pH fluids such as petroleum oils.
A stall-free modular air valve with externally serviceable pilot valves gives low-pulsation changeover, and the one-piece centre section and four-bolt joints keep the pump sealed. The manifolds accept centre or end porting.
It's supplied as the pump only, without suction or outlet hoses, so choose hoses rated for the fluid being pumped. Browse the other Husky 1050 pumps.
Graco requires a bleed-type master air valve after the regulator (110224, or the 110225 used in Graco's Husky 1050 packages), a fluid drain valve near the outlet, the 238909 ground wire and clamp, and grounded flexible hoses; with conductive flammable fluids, ground the entire fluid system. A 244844 regulator and gauge, a 106148 air filter and the 238428 relief kit are recommended. Bolt the pump to a solid surface or the 24C637 wall-mount kit. Parts shown without a link are available on request.