Any questions?
Quick answers on warranty, delivery and returns. Can't find what you need? Visit our FAQ page or Call Us.
Your cart is empty :(
Continue shoppingYour cart
Estimated total:
$0.00 AUD
Couldn't load pickup availability
A U-bolt grips an exhaust joint at one point and can crush the pipe out of round, leaving gaps for soot and fumes to escape. The Donaldson X004478 Flat Band SealClamp wraps a wide stainless band right around 76 mm (3 in) OD pipe. It conforms to straight or flex pipe and seals without distorting it. Use it on overlapping ID-to-OD joints, slotted pipe ends and flex tube at muffler inlets and outlets and elbow joints, and on light-duty butt joints where two pipes meet end to end. There's no welding and no pulling the exhaust apart to fit it.
Grease the band and the joint first, then sit the clamp a third to half of the way onto the larger tube, or so it fully covers the slots. Fit the bolts, then tighten by alternating between them several times, starting on the larger-diameter side, until the mating bars sit fully together. The grade 8 bolts and nuts are rated to 100 ft·lb (136 N·m), an impact wrench gives the best result, and they take a 9/16 in or 14 mm spanner. Fit a new clamp rather than reusing an old one, and don't use it to hang the exhaust or on the manifold or turbo connection: that job needs a V-band clamp.
Measure the outside of the pipe before ordering: this clamp suits 76 mm (3 in). Going into flex tube? The X007830 Stepped SealClamp seals that stepped overlap better. Cross-referenced across 110 OEM and aftermarket brands, including Caterpillar 841076000, Cummins 32941 and John Deere 841076000. The full list is in the cross reference tab.
| Type | Flat band exhaust seal clamp (SealClampâ„¢) |
|---|---|
| Pipe OD | 76 mm (3 in) nominal |
| Material | Stainless steel band |
| Joint type | Overlapping ID-to-OD and slotted joints, flex tube; butt joints in light-duty use only |
| Fasteners | Grade 8 bolts and nuts, rated to 100 ft·lb (136 N·m) |
| Spanner size | 9/16 in or 14 mm |
| Installation | Grease joint; position 1/3 to 1/2 onto larger tube or over slots; tighten alternately until mating bars meet |
| Not for | Exhaust mounting support, manifold or turbocharger connections; do not reuse |
| Packaging | Individually shrink-wrapped, loose parts |
| A P Parts | 9384 |
|---|---|
| Ag Chem Equipment | 32821 |
| AGCO | WR32821 |
| Ammann | 1944668 944668 947890 |
| AP Exhaust Products Inc | 9384 |
| Ardco | LL847414 MIY0001 |
| Atlas Copco | 351170 |
| Auto Jet | 28137220 |
| AWD | MD820228 |
| Badger | 76048156 |
| Bell | 205012 |
| Blount | 841076000 |
| Bluebird | 4324851 |
| BMY Wheeled Vehicles | CMV07110XO |
| Boss Industries | 300639300 |
| Cameco | 05519274 5519274 |
| Carrier Transicold | 66U13753 |
| Case/Case IH | Z3036919 85821060 73111489 180697 311432 |
| Caterpillar | 841076000 |
| Century II | 27Z738D2 |
| Champion Road | 206204 12726548 |
| Clamps Inc | EBC300 |
| Clark | 63676064 3676064 063676064 |
| Clark, J.L. | 3676064 |
| Compair | 9824380090006 |
| Crane Carrier | 5545 |
| Cub Cadet | 549556C91 DCX004478 |
| Cummins | 32941 0032941 CDD000115 CDD000117 30300674 |
| Curtis Noll | 87356X 87356 |
| Dart | KYX004478210 KYX004478 |
| Demag | 93610450 |
| Denyo | Y0602325089 |
| Dezzi | 370693 |
| Dresser | 154477 549556C91 |
| Dynaflex | 50TS300 |
| Dynapac | 375501 799121 |
| Eagle Truck Products | F1300 |
| Eimco | D2NKYX004478 14099 64106179 |
| Elgin | 1030039 1018783 |
| ENMTP CPG | 7410340 |
| Euclid | 3676064 6779670 M3676064 |
| Ex Air | 66300 |
| Fiat | 85821060 73111489 |
| FMC | 2233448 |
| Foden | 3300006004 |
| Ford | 9575X004478 9576X004478 |
| Freightliner | DNX004478 |
| Furukawa | 549556C91 |
| Getman | 594610 |
| Gillig | 5302322004 |
| Gradall | 86881375 |
| Grove | 7300000177 |
| Havam | HD3810 |
| Heavy Duty Mfg | 20300 |
| Herkules (Telsnig) | 403100953 |
| Hitachi | CL886720 73111489 |
| Hyster | 0270826 270826 |
| Ingersoll Rand | 52167400 35294305 35293059 |
| International | 549556C91 470837C91 485123C91 583967C91 DCX004478 |
| JLG | 1320128 1100440 |
| John Deere | 841076000 |
| Kalmar | 9228310003 |
| Koehring | 1240142 |
| Komatsu | 93610450 154477 |
| Leyland-DAF (LDV) | ACU5266 |
| Liebherr | 7410340 |
| Loesing | 21480 021480 |
| Mack | 2191KYX004478 |
| Manitowoc | 7300000177 |
| Maremont | X305 510305 |
| MCI | 2010770 |
| Mechanics Choice | 648816 |
| Multi Part | ACU5266 |
| Nacco Materials | 0270826 |
| Nelson | 89525W 89525K |
| New Flyer Industries Ltd | 8112017 |
| New Holland | 73111489 |
| Omniquip Parts World Wide | 1100440 |
| Orenstein & Koppel | 0944128 944128 |
| Oshkosh | 104851A |
| Pellenc | 13966 |
| Pettibone | LL847414 TJ841076000 |
| Prevost Car | 19502386 |
| Riker | TFC300 |
| Rover | ACU5266 |
| Sandvik | 68122681 64106179 |
| Schramm | 3830009 03830009 |
| Stemco | 12680005 2682430 2680005 2683530 |
| Sullair | 049660 49660 |
| Terex | 0944128 27Z738D2 Z3036919 |
| Tessi Truck Exhaust Inc | 320112 BC300FLAT |
| Timberjack | F010587 841076000 |
| Transportation Accessories | DSC300 |
| Truckex | A300 9384 |
| Unipart | ACU5266 |
| Unit Rig Equipment | 1008099 |
| Universal Coach Parts | DC300 |
| VME | 6779670 |
| Volvo | 027076627 ZM4343116 20004343116 27076627 6779670 020004343116 |
| Volvo Construction Equipment | ZM4343116 |
| Wagner Mining Equipment | 351170 |
| Waldon | 414755 |
| Walgahn-Motorentechn | 811684 00811684 |
| Walker Manufacturing | 35934 |
| Warner & Swasey | 86881375 |
| Waukesha | 209802D |
| Western Star Truck | 49045724 049045724 027076627 |
| White | 027076627 |
| Wilmar | 32821 |
| Wordsworth Holdings PLC | 234P5 |
Free shipping across Australia (metro and regional areas) once your order reaches the minimum spend for its category.
| What you're ordering | Free shipping from | Good to know |
|---|---|---|
| Small parcel items: filters, smaller parts and accessories | $149 | Orders up to 5kg |
| Local delivery: Geelong, Bellarine and Surf Coast | $199 | Up to 4 x 20L or 4 boxes |
| 4WD filter kit and oil bundles | $249 | 350ml to 10L bottles, 22kg limit, selected postcodes |
| Truck filter kit and oil bundles | $349 | 350ml to 20L bottles, 40kg limit, selected postcodes |
| Workshop hardware and equipment | $499 in Victoria $999 Australia-wide | Items up to 35kg each, excludes large bulky items |
| Bulk oil: 205L and 208L drums, IBCs | Always free | Delivered in 1-3 business days |
| Polycube diesel and AdBlue tanks | Free within Victoria | Outside Victoria, contact us before ordering |
| Click and collect, Geelong warehouse | Free | Ready within 2 hours |
Under the minimum? Shipping is calculated at checkout. Need freight arranged for a large or unusual order? Contact us before you buy and we'll sort it out.

$41.90 AUD
Quick answers on warranty, delivery and returns. Can't find what you need? Visit our FAQ page or Call Us.
Yes. Every product we sell carries its manufacturer’s warranty, and you make any claim through us. We lodge it with the manufacturer and keep you updated on the outcome. Cover varies by brand, and the manufacturer decides the claim, usually after inspecting the part.
Fitting aftermarket filters won’t void your vehicle or equipment warranty on its own, as long as you fit the correct part at the OEM service interval. A manufacturer’s warranty is in addition to your rights under the Australian Consumer Law. It doesn’t replace them.
You can return it for a change of mind within 30 days of delivery. The item has to be unopened and unused, in its original undamaged packaging, and come back with your invoice. Filters that have been fitted, and oils or fluids that have been opened, can’t be returned for a change of mind.
If we sent the wrong part, contact us within 7 days of delivery. We’ll collect it and send the correct part at no cost to you.
We ship to every state and territory in Australia. Estimated delivery from dispatch is 1 to 2 business days for same-state express and 3 to 6 business days for interstate standard. These are carrier estimates, and remote addresses can take longer.
At checkout you can choose Cheapest, Fastest or Best Value. Orders of $149 or more ship free, up to a total weight of 5kg. Inner Melbourne orders booked before 10am arrive the same day.
You can also use Click and Collect from 68 Nobility Street, Moolap. Orders are usually ready within 2 hours, Monday to Friday, 8:30am to 4:00pm.
Please contact us before you send anything back so we can give you a return authorisation. If your order arrives damaged or is the wrong part, tell us within 7 days of delivery and include photos. For faulty products we pay the return and replacement shipping.
We aim to process refunds and replacements within 5 business days of receiving the item. Refunds go back to your original payment method. Full details are in our Return Policy.