Fleetguard WF2076 spin-on coolant filter. 23 units DCA4 additive in pellet form, 11/16-16 UN-2B thread, 137.16 mm long. Cummins standard service.
Three DCA4 filters in this range share a thread, a gasket and almost identical dimensions, and differ only in how much additive they carry: 8 units, 12 units and 23 units.
That is the specification to get right, and it is the one you cannot see. The WF2073, WF2074 and this filter will all thread onto the same head. Fit the 23 unit filter to a system sized for 8 and you overconcentrate the additive, which can drop silicate out of solution and form gel. Fit the 8 unit filter where 23 were needed and the nitrite level falls below the threshold that protects against liner pitting.
Unit count is determined by cooling system volume, so it is a property of the machine rather than the engine alone. If a machine has had a larger radiator fitted, or a remote cooler added, the original figure may no longer be right.
Test the coolant before you change the filter rather than after. A test strip tells you where the additive level actually sits, which is worth more than any assumption about what the last person fitted.
The additive is carried in pellet form for progressive release.
Thread is 11/16-16 UN-2B with a 71.88 mm gasket outer diameter.
Cross-references confirmed across 4 or more OEM brands, including Bomag 31701076, Fiatallis 76107812, Kassbohrer 83121050210, and Furukawa 3381756H1. Full cross-reference table in the specifications tab below.