What makes up a diesel refuelling setup?
A pump, a hose, a nozzle and somewhere to store the fuel, plus a meter and filter if you need them. Each part has its own category:
- Diesel transfer pumps: every diesel pump in one place, battery, mains and manual.
- Electric diesel transfer pumps: 12V, 24V and 240V pumps, kits and dispensers.
- Manual diesel transfer pumps: hand pumps for drums where there's no power.
- Diesel ute tanks: tanks with pump kits for refuelling on the move.
- Diesel hose reels: keep the hose wound and off the ground.
- Diesel nozzles: automatic shut-off nozzles that stop overfills.
How do I choose the right setup?
Work from the power source outwards. These are the specs that matter:
- Power at the tank: battery, mains or none
- Flow rate in litres per minute, matched across pump, hose and nozzle
- Duty cycle, so the pump can handle your longest transfer
- Hose bore and length, since long, narrow hose cuts flow
- Tank capacity against the vehicle's payload
- Filtration on the dispensing line
How do I keep stored diesel clean?
Keep water and dirt out, and filter on the way to the machine. Condensation forms inside tanks with a large air space, and water at the bottom of a tank lets microbial growth, often called diesel bug, take hold. Check tank bottoms regularly, keep caps and breathers in good order, and fit a filter on the dispensing line so dirt stays out of modern injection systems.
Protect the engine end with fuel filters and water separators, track usage with a flow meter, and keep DEF on separate AdBlue equipment. Planning a full tank and pump setup? Send us your volumes.