A diesel nozzle that keeps flowing after the tank is full turns a routine refuel into a spill, a cleanup and a fuel loss you wear. That is the job the FuelShot FS-AL60 is built for, a 3/4in automatic shut-off nozzle that cuts the flow at full and suits small to mid-sized transfer setups.
The nozzle flows up to 60 lpm, which suits small and mid-sized transfer pumps rather than high-volume truck fills. The automatic shut-off is the feature that matters day to day: it senses when the tank reaches capacity and stops the flow, so an operator filling machinery on site is not standing over the nozzle waiting to catch the cut-off by hand. That is what keeps diesel out of the dirt and off the deck.
The body is aluminium with NBR seals, a combination chosen to resist wear from diesel and biodiesel blends rather than generic seals that harden and weep once fuel gets to them. Over a season of daily fills that is the difference between a nozzle that keeps sealing and one that starts dribbling at the spout.
Connection is a 3/4in BSP inlet with a 19mm spout. Australian transfer plumbing is typically BSP, so it threads onto common pump outlets without an adapter, and the 19mm spout fits the fill necks on most small and mid plant, light trucks and equipment tanks. An integrated swivel connector lets the nozzle turn in the hand as you position it, which takes the twist out of the hose and the strain off your wrist across a shift of fills.
Fluid rated for diesel and biodiesel blends. It is a fuel-transfer nozzle and is not intended for petrol, oils or DEF/AdBlue. It fits workshops, farms, construction sites and transport fleets running their own diesel from tanks or transfer pumps.
Handling stays simple over a long day of fills. The nozzle is light in the hand, and with the automatic shut-off doing the watching, an operator can hold the machine or the hose with the other hand rather than gripping the trigger through the whole fill. On a farm or a site where one person fuels several machines back to back, that is less standing time and less diesel on the ground across the shift.
To put it to work you connect it to a transfer pump or hose ending in a 3/4in BSP fitting. If you fill trucks or larger machinery and 60 lpm is slower than you want, the 1in FS-AL120 in the same range flows up to 120 lpm; size the nozzle to the tanks you fill most.