Fleetguard FS19925 StrataPore fuel water separator cartridge. 98% efficiency at 6 micron, 93% emulsified water separation, 2 lpm, 127.07 mm high. Fits Cummins.
Six micron particle filtration alongside 93% emulsified water separation is a demanding combination, and it points at a modern high pressure fuel system.
Common rail injection meters fuel through orifices measured in tens of microns and relies on the fuel itself to lubricate the moving parts inside the injector. Water interrupts that lubricating film at the moment of highest load, and fine particulate abrades surfaces that have no tolerance for it. Both have to be dealt with, which is why the specification on modern separators is higher on both counts than it was a generation ago.
Media is StrataPore, a multilayer melt-blown synthetic that grades capture through the depth of the pack. It also holds its structure in wet fuel, which matters in an element deliberately working with water present.
Rated flow is 2 lpm. That figure is the point at which emulsified separation still reaches its rated performance, so treat it as a limit rather than a guideline.
Cartridge construction at 127.07 mm high. Fit the seals supplied and wipe the housing bore.
Cross-reference confirmed against Cummins 5264870. Full cross-reference table in the specifications tab below.
Because coverage is narrow, order against that number or send us your engine serial and we will confirm it.