Valvoline Optimum Choice is a partial-synthetic NLGI 2 lithium complex grease for high-temperature, severe-service greasing. Its synthetic base oil holds viscosity across a wider temperature range than a straight mineral grease, while high-molecular-weight polymers make it cling and resist squeeze-out under heavy load. The 20kg keg is built for fleets and high-usage sites feeding automatic or bulk grease pumps.
A partial-synthetic grease for severe service
Some bearings run too hot and too heavily loaded for a general-purpose grease, which softens or is squeezed out. A partial-synthetic NLGI 2 lithium complex grease is built for exactly those conditions: the synthetic base oil holds viscosity across a wider temperature range and resists oxidation, staying serviceable longer at temperature.
Built to stay put under load
High-molecular-weight polymers make it cling and resist squeeze-out under heavy load, so it stays where it is needed rather than being forced out of the contact. That, combined with strong extreme-pressure performance, is what suits it to heavily loaded, hot-running bearings that a general-purpose grease cannot keep up with.
High-temperature strength
The lithium complex thickener gives a high dropping point, and the grease carries the water resistance, rust protection and load-carrying capacity needed for severe outdoor service.
Where it fits
It suits earthmoving, transport and industrial plant greasing heavily loaded, hot bearings and pins, particularly where a standard grease softens or is squeezed out. Match the grease to the operating temperature and load of the point for the intended service life.
Matching the grease to the service
Optimum Choice is a severe-service grease, so it earns its cost on the hot, heavily loaded, hard-to-reach points where a general-purpose grease softens or is squeezed out, rather than on light everyday points. Follow the equipment maker's greasing schedule, purge until clean grease appears, and grease more often on wet or heavily loaded points. When switching greases, purge the old product through, since mixing incompatible thickeners can degrade the grease, and wipe fittings clean before greasing so grit is not driven in. On the demanding bearings and pins it is designed for, the synthetic base oil and adhesive polymer structure keep it working where lesser greases give up.