Greasing pins, bushes, bearings and universal joints across a full machine on a hand gun is slow, tiring work, and the stubborn fittings still win. The AF-AP-1161 takes that load off you, a 450 g air-operated grease gun delivering continuous flow to 262 bar (26,200 kPa / 3,800 psi) so the joint takes the grease, not your arm.
Running on shop air, the gun delivers continuous grease flow instead of the stroke-by-stroke output of a hand gun, which is what keeps lubrication moving through a long service run without the fatigue. The 262 bar (26,200 kPa / 3,800 psi) capability is the part that clears stubborn, dirt-packed fittings that low-pressure guns stall on, so intervals stay on track on high-load, high-dirt gear like earthmoving equipment, implements, trailers and trucks.
A 360 degree swivelling body is the usability feature that saves the most time. It lets the gun turn to the fitting rather than making you turn your wrist and the hose, which matters when zerks are tucked behind guards, near chassis rails or under implements. Less repositioning means more fittings done and less strain over a full grease round.
It comes with a rigid outlet and a 4-jaw coupler, which bites and holds on the grease nipple for a secure connection that resists slipping off under pressure. That is what keeps the grease going into the joint rather than out around the coupler and onto the floor.
This is a grease gun for fleets, farms and busy workshops keeping serious maintenance schedules. It dispenses grease and is not intended for oils or fluids.
Air consumption is worth a thought before it goes on a small compressor. A continuous-flow air gun draws air while the trigger is held, so a compressor that keeps up is what lets you grease a full round without pausing for pressure to recover. On a workshop with a decent air supply that is a non-issue, and the continuous flow is exactly what makes long rounds quicker.
To put it to work you connect it to a compressed air supply, and it is ready to run with the rigid outlet and 4-jaw coupler fitted. If you need to reach fittings that a rigid outlet cannot line up on, a grease gun with a flexible outlet is the better tool for those points, so match the outlet to where your fittings sit.