Valvoline Valtorque C4-50 is a monograde SAE 50 transmission and drivetrain oil built to the Caterpillar TO-4 requirement for off-highway powershift transmissions, torque converters, wet brakes and final drives. The heavier SAE 50 grade holds a thicker film for hot-running final drives and heavy load, while maintaining the defined TO-4 friction. The 20L pack suits workshops servicing plant.
A heavier TO-4 grade for hot final drives
Final drives and gearing on heavy plant run hot under sustained load, and a heavier grade holds a robust film there where a lighter oil would thin. This monograde SAE 50, built to the Caterpillar TO-4 requirement, provides that film for off-highway powershift transmissions, wet brakes and heavily loaded final drives.
Film strength with TO-4 friction
Final drives and gearing on heavy plant run hot under sustained load, and the SAE 50 grade holds a robust film there while still meeting the TO-4 friction requirement that powershift clutches and oil-immersed brakes depend on. That lets the same oil protect the heavily loaded final drives and support the powershift transmission and wet brakes.
Broad approvals
It meets Caterpillar TO-4 and TO-2, API GL-4 and Allison C-4, covering off-highway powershift drivetrains and final drives.
Where it fits
It suits earthmoving and mining plant with hot, heavily loaded final drives specifying an SAE 50 TO-4 oil. Confirm the grade the equipment calls for before selecting.
Heavy final-drive use
The SAE 50 grade suits hot-running, heavily loaded final drives that need a thicker film than an SAE 30 provides, so it belongs where the machine specifies a 50 TO-4 oil rather than as a general powershift fill. Follow the equipment maker's service interval and grade recommendation, and keep the oil clean, since the same fluid protects the transmission, converter, wet brakes and final drives. The TO-4 friction specification keeps powershift clutches and oil-immersed brakes working correctly, so match the oil to that requirement. Change sooner under severe duty, and confirm the grade the machine calls for, as final-drive and transmission grades can differ on the same equipment.