Manual Oil Pumps (6)

Manual oil pumps get oil out of a pail, drum or IBC by hand, with no compressor or power needed. They suit farm sheds, small workshops, service utes and anyone who tops up machinery a few litres at a time. The common types are lever action pumps, rotary barrel pumps and pail pumps, some with adaptors for filling gearboxes and diffs. The container you're pumping from and the thickness of the oil decide the choice, since a rotary pump moves volume quickly while a lever pump gives more control on small fills. A pump that doesn't seal in the bung lets dust and moisture into the drum, and that dirt ends up in the next engine you fill. Have a look through the pumps below.

Manual Oil Pumps

6 products

  • A-FLO AF-AP-1336B 20L Oil Pump with Hose Retail Box
    Vendor:
    A-FLO Equipment

    AF-AP-1336B 20L Oil Pump with Hose (Retail Box)

    2 in stock
    Regular price $66.00 AUD
    Sale price $66.00 AUD Regular price
  • Ezi-Action – AF-EZ-1000/220 – 1000L IBC hand pump with adaptors – main view
    Vendor:
    Ezi-Action

    AF-EZ-1000/220 Ezi-Action 1000L IBC Hand Pump with Adaptors, 400 ml per Stroke

    Regular price $273.90 AUD
    Sale price $273.90 AUD Regular price
  • Ultraflo AF-AP-1316 aluminium lever action oil pump for 60L and 205L drums
    Up to $18.60 off
    Vendor:
    A-FLO Equipment

    AF-AP-1316 Standard 60L & 205L Lever Action Oil Pump, Aluminium, Telescopic Suction

    Regular price $82.00 AUD
    Sale price $82.00 AUD Regular price $100.60 AUD
  • A-FLO AF-AP-2220 205L Rotary Barrel Drum Pump – Cast Iron
    Vendor:
    A-FLO Equipment

    AF-AP-2220 205L Rotary Barrel Drum Pump, Cast Iron

    1 in stock
    Regular price $108.90 AUD
    Sale price $108.90 AUD Regular price
  • A-FLO AF-AP-1321 Heavy Duty 205L Rotary Barrel Drum Pump – Solid Aluminium
    Up to $32.50 off
    Vendor:
    A-FLO Equipment

    AF-AP-1321 Heavy Duty 205L Rotary Barrel Drum Pump, Solid Aluminium

    1 in stock
    Regular price $127.00 AUD
    Sale price $127.00 AUD Regular price $159.50 AUD
  • A-FLO AF-AP-1337B 20L Gear Oil Hand Pump with Adaptor Set
    Vendor:
    A-FLO Equipment

    AF-AP-1337B 20L Gear Oil Hand Pump with Adaptor Set

    Regular price $77.00 AUD
    Sale price $77.00 AUD Regular price

Lever, rotary or pail pump?

Each style suits a different job. Lever pumps deliver a set amount per stroke and are easy to control for top-ups. Rotary barrel pumps are cranked continuously and move more oil per minute, which suits filling sumps from a drum. Pail pumps fit a smaller container and often come with a flexible hose and adaptors for gear oil fillers.

Can a hand pump handle thick oil?

Yes, but more slowly. Heavy gear oil takes more effort and gives fewer litres per minute, especially in winter. If you pump gear oil regularly, a larger bore pump or an air operated pump will save time.

  • Container: pail, drum or IBC, and the bung size and thread on it.
  • Suction tube length to reach the bottom of the container.
  • Oil type and viscosity.
  • Body material: cast iron for durability, aluminium for carrying between drums.
  • Outlet: rigid spout or flexible hose for awkward fillers.

Keeping the oil clean

Use one pump per oil grade where you can, wipe the spout before use and cap the drum when you're done. A shared pump is an easy way to put hydraulic oil in an engine.

Doing more than a few litres a day? Air operated oil pumps save a lot of cranking. For moving the drum itself, see drum trolleys and cradles, or browse funnels and drum taps.

Will the pump fit my drum or container opening?

Check the opening, not just the container size.

  • 205L drums: the AF-AP-2220 (cast iron) and AF-AP-1321 (aluminium) rotary pumps fit through a 2" bung adaptor, with a 3-piece steel suction pipe that reaches the base. The AF-AP-1316 lever-action pump threads into the 2" bung and has a telescopic suction pipe that adjusts to a 60L or 205L drum.
  • 20L containers: the AF-AP-1336B sits on a 20L container; the AF-AP-1337B fits a plastic pull-out (Rieke) spout or 2" external threads, and its adaptor set suits other common openings.
  • 1000L IBCs: the Ezi-Action AF-EZ-1000/220 reaches 700 mm into the container and comes with threaded IBC adaptors. The adaptor listing is inconsistent, so confirm your IBC cap thread with us before ordering.

How much oil does each stroke or turn deliver?

Roughly 1 L every 3 turns on the rotary drum pumps, 1 L every 3 strokes on the lever-action drum pump, 1 L every 14 strokes on the 20L hand pumps, and 400 mL per stroke on the IBC pump.

None of these is a metered dispenser. Where the volume has to be recorded, pour into a LUBESMART measured jug or dispense through a metered oil gun.

Can I use a manual drum pump for petrol or diesel?

Only the rotary pumps on this page, and only one of them takes petrol.

  • AF-AP-1321 (aluminium): rated for petrol, diesel and motor oils. Keep it dedicated and labelled to one fluid so fuels and oils don't cross-contaminate.
  • AF-AP-2220 (cast iron): most motor oils and diesel. Not recommended for petrol, leaded or unleaded, or for gear oil.
  • AF-AP-1336B and AF-AP-1337B: oil transfer pumps for engine, gear, diff and hydraulic oils, not intended for fuels or water-based fluids. The AF-AP-1316 lever pump is for oil only.

For fuel drums, the AF-AP-1320 hand pumps in manual diesel transfer pumps are listed for diesel and petrol. For daily diesel transfer, see our diesel equipment.

What's the difference between the AF-AP-1336B and AF-AP-1337B 20L pumps?

The hose length and how they fit the container. Both are hand pumps for engine, gear, diff and hydraulic oils, with a polyethylene head, a nozzle holder with drain-back and a steel suction tube.

  • AF-AP-1336B: 1.5 m anti-kink hose, anti-drip nozzle and a telescopic extension; about 14 strokes per litre.
  • AF-AP-1337B: 1.2 m anti-kink hose, a 102 mm telescopic extension, and an adaptor set that fits a plastic pull-out (Rieke) spout or 2" external threads.

Take the 1337B if you move the pump between different containers; take the 1336B for the longer reach to the fill point.

How do I set up a rotary drum pump so it doesn't leak?

Assemble the 3-piece steel suction pipe, wrap Teflon tape on each join, then screw the pump into the drum's 2" bung with the bung adaptor supplied.

The tape seals the threads and stops the slow weep that turns into an oily floor. The three-piece pipe also lets one pump suit different drum depths and breaks down for storage and transport.

The pump delivers but doesn't measure, so add a nozzle or meter where you need to control what you draw. The AF-AP-2315 drum wrench takes out the 2" bung without chewing it.