Where oil is charged to jobs by volume, the meter is not a convenience, it is the basis for how you bill. That is what the AF-FP-984330 is built to protect, a digital metered oil control gun that delivers accurate, repeatable fills so top-ups stay clean and the paperwork stays honest.
The gun pairs an aluminium body with an integrated electronic meter, delivering up to 30 lpm at 70 bar (7,000 kPa / 1,015 psi) and holding ±0.5% accuracy on the back-lit display. The point of that accuracy is consistency across the whole flow range, not just at a single calibration point, which is what a workshop charging by volume needs across both slow top-ups and fast sump refills. Over a month of fills, that is the difference between stock that reconciles and stock that quietly walks.
A double totaliser tracks a batch total and a lifetime total, and the two do different jobs. The batch figure is what you read off for the fill in front of you. The lifetime figure is what supports stock reconciliation and usage tracking when it is time to account for what has gone out. Setup stays quick with a ready-to-use meter, easy calibration, an electronic reset, and an adjustable UMA camshaft for repeatable control.
The build is specified for real service bays. IP65 sealing and a rubber over-mould handle dust and drips, the flexible outlet reaches into tight engine bays without spilling down the side of the fill point, and a 360 degree swivel takes the twist out of the hose to cut wrist fatigue over a shift. The grip is shaped for one-handed work, so an operator can steady the machine with one hand and dose with the other. Inside, A-FLO uses aluminium for the meter and nozzle bodies for strength without bulk, NBR, nickel-plated steel and brass in the valve for chemical resistance, and technopolymer gears for metering accuracy and low wear. It runs on 2 x AAA batteries, included, with low consumption, so there is no power supply to route out to the gun.
It handles oils up to 2000 cSt, which covers everything from light engine oils through to heavier gear oils, making it a fit for passenger, heavy vehicle, agricultural and mining service bays. It is an oil dispensing gun and is not intended for grease or water-based fluids.
The gun connects to an oil hose reel or hose to complete a dispensing point, so it pairs naturally with a fixed oil reel on the supply side. Batteries are included and it calibrates in minutes, so it is ready to fit and verify on the day it arrives.