Valvoline VPS Engine Flush is a fast-acting workshop additive that removes sludge, varnish and deposits from inside the engine in about five minutes, clearing oil channels so fresh oil stays clean. The 20L pack lets workshops flush customer engines before every oil change economically, keeping servicing quick and thorough. Decant to a measure for consistent dosing.
Engine flushing at workshop scale
A thorough service clears the engine's internal sludge before fresh oil goes in, and doing that at volume is what a busy workshop needs. This fast-acting engine flush removes sludge, varnish and deposits in about five minutes, clearing oil channels so fresh oil stays clean, in a bulk pack sized for the trade.
How it works
Added to the crankcase and run briefly before draining, it dissolves the internal sludge and varnish that old oil leaves behind, freeing sticky components and clearing restricted passages so the new oil starts on a clean engine. Doing this before every oil change is what keeps deposits from accumulating service after service.
Bulk economy
The 20L pack lets a workshop flush customer engines economically, decanting to a measure for consistent dosing, which keeps servicing both quick and thorough.
Where it fits
It suits workshops flushing engines before oil changes as a routine part of servicing petrol and diesel vehicles.
Workshop dosing
Decant from the 20L pack to a measure, add to the warm engine oil before an oil change, and run at idle for the time on the pack so it dissolves sludge and frees sticky components, then drain warm to carry the contamination out. Do not drive or rev hard during the flush. Change the filter and refill with fresh oil afterwards. Being non-solvent, it is gentle on seals and gaskets, so it is safe to include before every oil change. Bulk supply makes flushing economical enough to do as standard, which keeps customer engines cleaner service after service and gets the most from each fresh oil charge.